User Guide Manual

Rear Heated Seats

On some models, the two outboard seats are equipped with heated seats. The heated seat

switches for these seats are located on the rear of the center console. There are two heated

seat switches

that allow the rear passengers to operate the seats independently.

You can choose from HI, LO or OFF heat settings. The indicator lights in each switch

indicate the level of heat in use. Two indicator lights will illuminate for HI, one for LO and

none for OFF.

•Presstheheatedseatbutton

once to select HI-level heating.

•Presstheheatedseatbutton

asecondtimetoselectLO-levelheating.

•Presstheheatedseatbutton

athirdtimetoturntheheatingelementsOFF.

NOTE:

•Onceaheatsettingisselected,heatwillbefeltwithintwotofiveminutes.

•Theenginemustberunningfortheheatedseatstooperate.

When the HI-level setting is selected, the heater will provide a boosted heat level during

the first four minutes of operation. Then, the heat output will drop to the normal HI-level.

If the HI-level setting is selected, the system will automatically switch to LO-level after

approximately 60 minutes of continuous operation. At that time, the number of illumi-

nated LEDs changes from two to one, indicating the change. The LO-level setting will turn

OFF automatically after approximately 45 minutes.

Front Ventilated Seats

Located in the seat cushion and seat back are small fans that draw the air from the

passenger compartment and move air through fine perforations in the seat cover to help

keep the driver and front passenger cooler in higher ambient temperatures. The fans

operate at two speeds, HI and LO.

The front ventilated seats control buttons are located within the Uconnect

system. You

can gain access to the control buttons through the climate screen or the controls screen.

•Presstheventilatedseatbutton

once to choose HI.

•Presstheventilatedseatbutton

asecondtimetochooseLO.

•Presstheventilatedseatbutton

athirdtimetoturntheventilatedseatOFF.

NOTE:

The engine must be running for the ventilated seats to operate.

Vehicles Equipped With Remote Start

On models that are equipped with remote start, the ventilated seats can be programed to

come on during a remote start.

This feature can be programmed through the Uconnect

system. Refer to “Uconnect

Settings” in “Understanding Y our Instrument Panel” in the Owner's Manual on the DVD.

GETTING STARTED