User Guide Manual

Rain Sensing Wipers

This feature senses moisture on the vehicle's windshield and automatically activates the

wipers for the driver when the switch is in the intermittent position. Rotate the end of the

lever to one of four settings to activate this feature and adjust sensitivity.

Rain Sensing can be turned on and off using the Uconnect

System, refer to the Owner's

Manual on the DVD for further details.

High Beam Operation

Push the lever forward to activate the high beams. Pull the lever toward you for flash to

pass.

NOTE:

For safe driving, turn off the high beams when oncoming traffic is present to prevent

headlight glare and as a courtesy to other motorists.

HEADLIGHT SWITCH

Automatic Headlights/Parking Lights/Headlights

•Rotatetheheadlightswitch,locatedon

the instrument panel to the left of the

steering wheel, to the first detent from

the off position for parking light

and to the second detent for headlight

•Withtheparkinglightsorlowbeam

headlights on, press the headlight switch

for front fog lights. Pressing the switch a

second time will deactivate the front fog

lights. Turning the headlight switch off

will also deactivate the front fog lights.

•Rotatetheheadlightswitchto“AUTO”

for AUTO headlights.

•WhensettoAUTO,thesystemautomati-

cally turns the headlights on or off based on ambient light levels.

Automatic High Beams

The Automatic High Beams system provides increased forward lighting at night by

automating high beam control through the use of a digital camera mounted above the

inside rearview mirror. This camera detects vehicle specific light and automatically

switches from high beams to low beams until the approaching vehicle is out of view . This

feature is programmable through the Uconnect

system. Refer to “Uconnect

Settings”

in “Understanding Y our Instrument Panel” in the Owner's Manual on the DVD for further

details.

Headlight Switch

1—AutomaticHeadlights

2—RotateHeadlightSwitch

3—RotateDimmer

4—RotateAmbient

OPERATING YOUR VEHICLE