2012 Avenger 2012 OWNER’S MANUAL Chrysler Group LLC 12D41-126-AA 905541-Avenger-OM cover.indd 1 First Edition Avenger Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 1 CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number .............. 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . . 7 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by Warranty Information, and various customer-oriented documents.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 䡵 Vehicle Security Alarm — If Equipped . . . . . . . . 18 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . 12 ▫ Rearming The System . . . . . . . . . . . . . . . . . . 19 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . 15 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . 19 ▫ Locking Doors With A Key . . . . . . . . . . . . . . 15 ▫ To Disarm The System . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . 25 ▫ Auto Window Down — If Equipped . . . . . . . 35 ▫ Programming Additional Transmitters . . . . . . 25 ▫ Auto Window Up With Anti-Pinch Protection— If Equipped . . . . . . . . . . . . . . . . 36 ▫ Transmitter Battery Replacement . . . . . . . . . . 25 ▫ General Information . . . . . . . . . . . . . . . . . . . 26 䡵 Remote Start System — If Equipped . . . . . . . . . 27 ▫ How To Use Remote Start .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Automatic Locking Retractor Mode (ALR) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 51 ▫ Energy Management Feature . . . . . . . . . . . . . 52 ▫ Seat Belt Pretensioners . . . . . . . . . . . . . . . . . 52 ▫ Advanced Front Air Bag Features . . . . . . . . . . 60 ▫ Air Bag Deployment Sensors And Controls . . . 64 ▫ Event Data Recorder (EDR) . . . . . . . . . . . . . . 71 ▫ Child Restraints . . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your authorized dealer. Ask your authorized dealer for these numbers and keep them in a safe place. You can insert the double-sided keys into the locks with either side up. Vehicle Key Ignition Key Removal Automatic Transaxle Place the shift lever in PARK.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 occurs, place the shift lever in PARK, rotate the key to the right slightly, then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition switch lock cylinder to warn you that this safety feature is inoperable. The engine can be started and stopped, but the key cannot be removed until you obtain service.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. The time for this feature is programmable. Refer to “Electronic Vehicle Information Center (EVIC)/ Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Key-In-Ignition Reminder SENTRY KEY姞 Opening the driver’s door when the key is in the ignition The Sentry Key威 Immobilizer System prevents unauthorsounds a signal to remind you to remove the key. ized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation NOTE: is automatic, regardless of whether the vehicle is locked • The Key-In-Ignition reminder only sounds when the or unlocked.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE seconds for a bulb check. If the Vehicle Security Light remains on after the bulb check, it indicates that there is a problem with the electronics. In addition, if the Vehicle Security Light begins to flash after the bulb check, it indicates that someone used an invalid key to start the engine. Either of these conditions will result in the engine being shut off after two seconds.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN). This PIN is required for authorized dealer replacement of keys. Duplication of keys may be performed at an authorized dealer or by using the Customer Key Programming procedure. This procedure consists of programming a blank key to the vehicle electronics. A blank key is one which has never been programmed. 2.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The new Sentry Key威 is programmed. The Remote • This device must accept any interference that may be Keyless Entry (RKE) transmitter will also be proreceived, including interference that may cause undegrammed during this procedure. sired operation. Repeat this procedure to program up to eight keys.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Rearming The System If something triggers the alarm, and no action is taken to disarm it, the Vehicle Security Alarm will turn off the horn after three minutes, turn off all of the visual signals after 15 minutes, and then the Vehicle Security Alarm will rearm itself. To Arm The System Security Alarm is arming.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • The driver’s door key cylinder and the trunk button on the RKE transmitter cannot arm or disarm the Vehicle Security Alarm. • The Vehicle Security Alarm remains armed during trunk entry. Pressing the trunk button will not disarm the Vehicle Security Alarm. If someone enters the vehicle through the trunk and opens any door, the alarm will sound.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 The interior lights will fade to off after approximately NOTE: 30 seconds or they will immediately fade to off once the • The line of transmission must not be blocked with metal objects. ignition switch is turned to ON/RUN from the OFF position.. • Inserting the key into the ignition switch disables all buttons on the RKE transmitter.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock The Doors Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door, or twice to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The Illuminated Entry system (if equipped) will also turn on.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 cause the alarm to sound. Press the UNLOCK button to 2. Release both buttons at the same time. deactivate the Vehicle Security Alarm system. 3. Test the feature while outside of the vehicle by pressing the LOCK/UNLOCK buttons on the RKE transmitter Flash Lights With Lock The feature will cause the turn signal lights to flash when with the ignition in the LOCK position and the key the doors are locked or unlocked with the RKE transmit- removed. ter.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE equipped with EVIC. For details, refer to “Electronic • For vehicles not equipped with the EVIC, perform the Vehicle Information Center (EVIC)/Personal Settings following steps: (Customer-Programmable Features)” in “Understanding 1. Press the LOCK button on a programmed RKE transYour Instrument Panel” for further information. mitter for at least four seconds, but not longer than To Lock The Doors 10 seconds.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Opening a door with the alarm activated will cause the NOTE: You may need to be close to the vehicle when alarm to sound. Press the UNLOCK button to deactivate using the RKE transmitter to turn off the Panic Alarm due to the Radio Frequency (RF) noises emitted by the the Vehicle Security Alarm. system. To Unlatch The Trunk Press the TRUNK button on the RKE transmitter two Programming Additional Transmitters times to unlatch the trunk.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. With the RKE transmitter buttons facing down, use a flat blade screwdriver to pry the two halves of the RKE transmitter apart. Make sure not to damage the seal during removal. 2. Remove and replace the battery. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 3. To assemble the RKE transmitter case, snap the two halves together.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 If your RKE transmitter fails to operate from a normal How To Use Remote Start All of the following conditions must be met before the distance, check for these two conditions. engine will remote start: 1. Weak battery in the RKE transmitter. The expected life • Shift lever in PARK of a battery is five years. 2.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Monoxide (CO) which is odorless and colorless. Carbon Monoxide is poisonous and can cause serious injury or death when inhaled. • Keep Remote Keyless Entry (RKE) transmitters away from children. Operation of the Remote Start System, windows, door locks or other controls could cause serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • For security, power window operation is disabled To Exit Remote Start Mode Without Driving The when the vehicle is in the Remote Start mode. Vehicle Press and release the REMOTE START button one time or • The engine can be started two consecutive times (two allow the engine to run for the entire 15 minute cycle. 15 minute cycles) with the RKE transmitter.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS WARNING! Manual Door Locks To lock each door, push the door lock knob on each door trim panel downward. To unlock each door, pull the inside door handle. Manual Lock Knob • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all of the doors when leaving the vehicle unattended. 2 Power Door Locks A door lock switch is located on the driver and passenger door panel. Press this switch to lock or unlock the doors.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Door Locks — If Equipped The auto door lock feature default condition is enabled. When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). The auto door lock feature can be enabled or disabled by your authorized dealer. Please see your authorized dealer for service. Auto Unlock On Exit The doors will unlock automatically on vehicles with power door locks if: 5. The doors were not previously unlocked. 6.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 3. Press the power door unlock switch to unlock the Child-Protection Door Lock System — Rear doors. Doors To provide a safer environment for children riding in the 4. A single chime will indicate the completion of the rear seat, the rear doors of your vehicle have a Childprogramming. Protection Door Lock system. 5. Repeat these steps if you want to return this feature to its previous setting.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Child-Protection Door Locks are located inside the rear edge of the door. Insert the tip of the ignition key or similar flat-bladed object into the lock and rotate approximately one-quarter turn to the lock or unlock position (as indicated by the stamped icons). WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 WARNING! Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unattended children, can become entrapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death. Auto Window Down — If Equipped The front window controls on the driver and passenger door trim panels have an Auto-Down feature.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To cancel the Auto-Down movement, operate the switch Auto Window Up With Anti-Pinch Protection— If either in the up or down direction and release the switch. Equipped Lift the window switch fully upward to the second For vehicles not equipped with the Electronic Vehicle detent, release, and the window will go up automatically.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 • Any impact due to rough road conditions may trigger the auto reverse function unexpectedly during autoclosure. If this happens, pull the switch lightly to the first detent and hold to close window manually. WARNING! Window Lockout Switch The window lockout switch on the driver’s door allows you to disable the window control on the other doors. To disable the window controls on the other doors, press the window LOCK button.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Wind Buffeting TRUNK RELEASE Wind buffeting can be described as the perception of Use the Remote Keyless Entry (RKE) pressure on the ears or a helicopter-type sound in the transmitter to open the trunk from ears. Your vehicle may exhibit wind buffeting with the outside the vehicle. From inside the windows down, or the sunroof (if equipped) in certain vehicle the trunk lid can be released by open or partially open positions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 With the ignition switch in the LOCK position or with the Trunk Internal Emergency Release key out, the word “dECK” will display until the trunk is As a security measure, a Trunk Internal Emergency Release lever is built into the trunk latching mechanism. closed.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE OCCUPANT RESTRAINTS • Knee bolsters/blockers for front seat occupants Some of the most important safety features in your • Front seat belts incorporate pretensioners that may vehicle are the restraint systems: enhance occupant protection by managing occupant • Three-point lap and shoulder belts for all seating energy during an impact event positions • All seat belt systems (except the driver’s) include • Advanced Front Air Bags for driver and front passenAutom
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 infant and child restraint systems. For more information Children that are not big enough to wear the vehicle seat on LATCH, refer to Lower Anchors and Tether for belt properly (see section on Child Restraints) should be CHildren (LATCH). secured in the rear seat in child restraints or beltpositioning booster seats.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. The driver and front passenger seats should be moved back as far as practical to allow the Advanced Front Air Bags room to inflate. 4. Do not lean against the door or window. If your vehicle has side air bags, and deployment occurs, the side air bags will inflate forcefully into the space between you and the door. 5. If the air bag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 WARNING! (Continued) • Supplemental Side Air Bag Inflatable Curtain (SABIC) and Seat-Mounted Side Air Bags (SAB) also need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat. • In an accident, you and your passengers can suffer much greater injuries if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Be sure everyone in your vehicle is in a seat and using a seat belt properly. • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In an accident, people riding in these areas are more likely to be seriously injured or killed. • Wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2 2. The seat belt latch plate is above the back of the front seat, next to your arm. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap. Pulling Out The Latch Plate 3.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly. In a sudden stop, you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 WARNING! • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in an accident, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the belt over your shoulder so that your strongest bones will take the force in a collision. • A shoulder belt placed behind you will not protect you from injury during an accident.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A lap belt worn too high can increase the risk of internal injury in an accident. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt will not protect you properly. In a collision, it could even cut into you. Be sure the belt is straight.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Lap/Shoulder Belt Untwisting Procedure Adjustable Upper Shoulder Belt Anchorage Use the following procedure to untwist a twisted lap/ In the front seat, the shoulder belt can be adjusted shoulder belt. upward or downward to position the belt away from your neck. Push ANCHORAGE button to release the 1. Position the latch plate as close as possible to the anchorage, and move it up or down to the position that anchor point. fits you best. 2.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average, you will Driver prefer a lower position, and if you are taller than average, First Row N/A you will prefer a higher position. When you release the Second Row ALR anchorage, try to move it up or down to make sure that • N/A — Not Applicable it is locked in position. Rear Seat Belts The shoulder belt anchorages of the rear three-point belts are nonadjustable for outboard and center rear passengers on sedans.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 Automatic Locking Retractor Mode (ALR) — If Equipped In this mode, the shoulder belt is automatically prelocked. The belt will still retract to remove any slack in the shoulder belt. The Automatic Locking Mode is available on all passenger-seating positions with a combination lap/shoulder belt. Use the Automatic Locking Mode anytime a child safety seat is installed in a seating position that has a belt with this feature.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Energy Management Feature This vehicle has a safety belt system with an Energy Management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on accident. This safety belt system has a retractor assembly that is designed to release webbing in a controlled manner. This feature is designed to help reduce the belt force acting on the occupant’s chest.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 How The Active Head Restraints (AHR) Work The Occupant Restraint Controller (ORC) determines whether the severity, or type of rear impact will require the Active Head Restraints (AHR) to deploy. If a rear impact requires deployment, both the driver and front passenger seat AHRs will be deployed. When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! 1. Grasp the deployed AHR from the rear seat. All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident. NOTE: For more information on properly adjusting and positioning the head restraint, refer to “Adjusting Active Head Restraints” in “Understanding The Features Of Your Vehicle”.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 2 1 — Downward Movement 2 — Rearward Movement 3 — Final Downward Movement To Engage Locking Mechanism
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. The AHR front soft foam and trim half should lock • For safety reasons, have the Active Head Restraints into the back decorative plastic half. checked by a qualified specialist at an authorized dealer. Enhanced Seat Belt Use Reminder System (BeltAlert姞) BeltAlert威 is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert威) to fasten their seat belts. The feature is active whenever the ignition is on.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 Light remains illuminated until the respective seat belts are fastened. The driver should instruct all other occupants to fasten their seat belts. If a front seat belt is unbuckled while traveling at speeds greater than 5 mph (8 km/h), BeltAlert威 will provide both audio and visual notification.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE extender should be used only if the existing belt is not instrument panel, above the glove compartment. The long enough. When it is not required, remove the ex- words SRS AIRBAG are embossed on the air bag covers. tender, and store it. WARNING! Using a seat belt extender when not needed can increase the risk of injury in an accident. Only use when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have different rates of inflation that are based on the severity and type of collision. This vehicle is equipped with Supplemental Side Air Bag Inflatable Curtains (SABIC) to protect the driver, front, and rear passengers sitting next to a window. If the vehicle is equipped with SABIC, they are located above the side windows.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag System Components • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, Your vehicle may be equipped with the following air bag and Seat Track Position Sensors system components: Advanced Front Air Bag Features • Occupant Restraint Controller (ORC) The Advanced Front Air Bag system has multistage driver and front passenger air bags.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 WARNING! • No objects should be placed over or near the air bag on the instrument panel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bag to inflate. • Do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover. Each air bag deploys independently; a left side impact deploys the left air bag only and a right-side impact deploys the right air bag only. Supplemental Side Air Bag Inflatable Curtain (SABIC) SABIC air bags may offer side-impact protection to front and rear seat outboard occupants in addition to that provided by the body structure.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 The system includes side impact sensors that are calibrated to deploy the side air bags during impacts that require air bag occupant protection. WARNING! • If your vehicle is equipped with left and right Supplemental Side Air Bag Inflatable Curtain (SABIC), do not stack luggage or other cargo up high enough to block the location of the SABIC. The area where the SABIC is located should remain free from any obstructions.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Along with seat belts and pretensioners, Advanced Front Air Bags work with the knee bolsters to provide improved protection for the driver and front passenger. Side air bags also work with seat belts to improve occupant protection. Air Bag Deployment Sensors And Controls Advanced Front Air Bags are designed to provide additional protection by supplementing the seat belts in certain frontal collisions depending on the severity and type of collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Also, the ORC turns on the Air Bag Warning Light in the instrument panel for approximately four to eight seconds for a self-check when the ignition is first turned on. After the self-check, the Air Bag Warning Light will turn off.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the air bag system immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Based on the severity and type of collision, the side air bag inflator on the crash side of the vehicle may be triggered, releasing a quantity of non-toxic gas. The inflating SAB exits through the seat seam into the space between the occupant and the door. The SAB fully inflate in about 10 milliseconds.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System In the event of an impact causing air bag deployment, if the communication network remains intact, and the power remains intact, depending on the nature of the event the ORC will determine whether to have the Enhanced Accident Response System perform the following functions: • • • • NOTE: Front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with the air bag system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 bag inflation. These airborne particles may irritate the Maintaining Your Air Bag System skin, eyes, nose, or throat. If you have skin or eye WARNING! irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation • Modifications to any part of the air bag system continues, see your doctor. If these particles settle on could cause it to fail when you need it.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat including your trim cover and cushion needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), take the vehicle to your authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper air bag fuses. See your authorized dealer if the fuse is good.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. WARNING! In a collision, an unrestrained child, even a tiny baby, can become a projectile inside the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 held in the vehicle by the lap/shoulder belt or the Infants And Child Restraints Safety experts recommend that children ride rearward- LATCH child restraint anchor system. Refer to “Lower facing in the vehicle until they are two years old or until Anchors and Tether for CHildren (LATCH)”. they reach either the height or weight limit of their rear WARNING! facing child safety seat.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. These child seats are also held in the vehicle by the lap/shoulder belt or the LATCH child restraint anchorage system. Refer to “Lower Anchors and Tether for CHildren (LATCH)”.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Here are some tips on getting the most out of your child restraints: • Carefully follow the instructions that come with the restraint. If you install the restraint improperly, it may not work when you need it. • Children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to • All passenger seating positions contain automatic bend over the front of the seat when their back is locking retractors.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE around, and insert the latch plate into the buckle Lower Anchors and Tether for CHildren (LATCH) again. If you still can’t make the child restraint secure, Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower try a different seating position. Anchors and Tether for CHildren.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 the vehicle’s seat belts. Please refer to “Installing The LATCH-Compatible Child Restraint System” for typical installation instructions. Rear Seat LATCH Anchors Child restraints systems having attachments designed to connect to the lower anchorages are now available. Child restraints having tether straps and hooks for connection to the top tether anchorage, have been available for some time.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE have tether straps, and you are urged to take advantage Installing The LATCH-Compatible Child Restraint of all of the available attachments provided with your System We urge you to carefully follow the directions of the child restraint in any vehicle. manufacturer when installing your child restraint. Not all NOTE: When using the LATCH attaching system to child restraint systems will be installed as described here.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 window. These tether strap anchorages are under a provide the most direct path between the anchor and the child restraint. Finally, tighten all three straps as you plastic cover with this symbol on it.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle. WARNING! Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 between the two posts. If not possible, lower the head Installing Child Restraints Using The Vehicle Seat restraint and pass the tether strap around the outboard Belt The seat belts in the passenger seating positions are side of the head restraint. equipped with an Automatic Locking Retractor to secure 3. Attach the tether strap hook (A) of the child restraint a Child Restraint System (CRS).
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • N/A — Not Applicable • ALR — Automatic Locking Retractor Installing a Child Restraint with an ALR: 1. To install a child restraint with ALR, first, pull enough of the seat belt webbing from the retractor to route it through the belt path of the child restraint. Slide the latch plate into the buckle until you hear a “click.” Next, extract all the seat belt webbing out of the retractor and then allow the belt to retract into the retractor.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 • The lap portion should be low on the hips and as snug as possible. ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. • Check belt fit periodically. A child’s squirming or slouching can move the belt out of position. Drive moderately during the first 300 miles (500 km).
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! WARNING! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Exhaust Gas WARNING! (Continued) WARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (CO), follow these safety tips: • Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE inspect the exhaust system each time the vehicle is raised authorized dealer. If the light stays on, flickers, or comes on while driving, have the system checked by an authofor lubrication or oil change. Replace as required. rized dealer. Safety Checks You Should Make Inside The Defroster Vehicle Check operation by selecting the defrost mode and place Seat Belts the blower control on high speed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 WARNING! WARNING! (Continued) Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal injury. • Always make sure that floor mats are properly attached to the floor mat fasteners. • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside The Vehicle Tires Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Check the wheel nuts for tightness. Check the tires (including spare) for proper cold inflation pressure.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 䡵 Uconnect™ Phone — If Equipped . . . . . . . . . . . 97 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . 93 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 99 ▫ Automatic Dimming Mirror — If Equipped . . . 94 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . 106 ▫ Power Mirrors . . . . . . . . . . . . . . . . . . . . . . .
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Voice Command — If Equipped . . . . . . . . . . . 127 ▫ Head Restraints . . . . . . . . . . . . . . . . . . . . . 140 ▫ Voice Command System Operation . . . . . . . . 127 ▫ Folding Rear Seat . . . . . . . . . . . . . . . . . . . . 144 ▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . 128 ▫ Folding Rear Seat Center Armrest . . . . . . . . 145 ▫ Voice Training . . . . . . . . . . . . . . . . . . . . . . 132 䡵 To Open And Close The Hood . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 ▫ Fog Lights — If Equipped . . . . . . . . . . . . . . 150 䡵 Electronic Speed Control — If Equipped . . . . . 159 ▫ Daytime Running Lights — If Equipped . . . . 151 ▫ To Activate . . . . . . . . . . . . . . . . . . . . . . . . . 160 ▫ Lights On Reminder . . . . . . . . . . . . . . . . . . 151 ▫ To Set A Desired Speed . . . . . . . . . . . . . . . . 160 ▫ Instrument Panel Dimmer . . . . . . . . . . . . . . 151 ▫ To Deactivate . . . . . . . . . . . . . . .
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 ▫ Ignition Off Operation . . . . . . . . . . . . . . . . . 173 ▫ Troubleshooting Tips . . . . . . . . . . . . . . . . . . 169 䡵 Electrical Power Outlets . . . . . . . . . . . . . . . . . 174 ▫ General Information . . . . . . . . . . . . . . . . . . 170 䡵 Cigar Lighter And Ash Receiver — If Equipped . . . . . . . . . . . . . . . . . 䡵 Power Sunroof — If Equipped . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. 3 Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (toward the windshield).
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 3 Power Mirror Control Mirror Directions To adjust a mirror, turn the control wand toward the left When you are finished adjusting the mirror, turn the or right mirror positions indicated. Tilt the control wand control to the center position to prevent accidentally in the direction you want the mirror to move. moving a mirror.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting Side View Mirrors Exterior Mirrors Folding Feature All exterior mirrors are hinged and may be moved either Outside Mirror — Driver Side forward or rearward to resist damage. The hinges have Adjust the outside mirror to center on the adjacent lane of three detent positions: full forward, full rearward and traffic, with a slight overlap of the view obtained on the normal. inside mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect™ Phone. NOTE: The Uconnect™ Phone requires a mobile phone equipped with the Bluetooth威 “Hands-Free Profile”, Version 0.96 or higher. See the Uconnect™ website for supported phones. For Uconnect™ customer support, visit the following websites: • www.chrysler.com/uconnect Illuminated Vanity Mirror • www.dodge.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The Uconnect™ Phone is driven through your Bluetooth威 “Hands-Free Profile” mobile phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Voice Command Button Actual button location may vary with the radio. The individual buttons are described in the “Operation” section. Operation Voice commands can be used to operate the Uconnect™ Phone and to navigate through the Uconnect™ Phone menu structure. Voice commands are required after most Uconnect™ Phone prompts.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE example, you can use the compound form voice command “Phonebook New Entry”, or you can break the compound form command into two voice commands: “Phonebook” and “New Entry”. Please remember, the Uconnect™ Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you. Voice Command Tree Refer to “Voice Tree” in this section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 • When prompted, after the beep, say “Pair a Device” and follow the audible prompts. • You will be asked to say a four-digit Personal Identification Number (PIN), which you will later need to enter into your mobile phone. You can enter any four-digit PIN. You will not need to remember this PIN after the initial pairing process. phone to use if multiple mobile phones are in the vehicle at the same time.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Uconnect™ Phone will confirm the phone number • The Uconnect™ system will confirm the name and and then dial. The number will appear in the display then dial the corresponding phone number, which of certain radios. may appear in the display of certain radios. Call By Saying A Name Add Names To Your Uconnect™ Phonebook • Press the NOTE: Adding names to the Uconnect™ Phonebook is recommended when the vehicle is not in motion. button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 • When prompted, enter the number designation (e.g., “Home”, “Work”, “Mobile”, or “Other”). This will allow you to store multiple numbers for each phonebook entry, if desired. Phonebook Download – Automatic Phonebook Transfer From Mobile Phone If equipped and specifically supported by your phone, Uconnect™ Phone automatically downloads names (text names) and number entries from your mobile phone’s • When prompted, recite the phone number for the phonebook.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Depending on the maximum number of entries down- Edit Uconnect™ Phonebook Entries loaded, there may be a short delay before the latest NOTE: downloaded names can be used. Until then, if avail• Editing names in the phonebook is recommended able, the previously downloaded phonebook is availwhen the vehicle is not in motion. able for use. • Automatic downloaded phonebook entries cannot be • Only the phonebook of the currently connected mobile deleted or edited.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 After you are finished editing an entry in the phonebook, • After you enter the Phonebook Delete menu, you will you will be given the opportunity to edit another entry in then be asked for the name of the entry that you wish the phonebook, call the number you just edited, or return to delete. You can either say the name of a phonebook to the main menu.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Delete/Erase “All” Uconnect™ Phonebook Entries • Press the button to begin. • After the “Ready” prompt and the following beep, say “Phonebook Erase All”. • After the “Ready” prompt and the following beep, say “Phonebook List Names”. • The Uconnect™ Phone will play the names of all the phonebook entries, including the downloaded phonebook entries, if available.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the Uconnect™ Phone. Check with your mobile service provider for the features that you have.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Place/Retrieve A Call From Hold To put a call on hold, press the button until you hear a single beep. This indicates that the call is on hold. To bring the call back from hold, press and hold the button until you hear a single beep. Three-Way Calling To initiate three-way calling, press the button while a call is in progress, and make a second phone call, as described under “Making a Second Call While Current Call is in Progress”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 • After the “Ready” prompt and the following beep, say • After the ignition key is switched to OFF, a call can “Redial”. continue on the Uconnect™ Phone for a certain duration, after which the call is automatically transferred • The Uconnect™ Phone will call the last number that from the Uconnect™ Phone to the mobile phone. was dialed from your mobile phone.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After selecting one of the languages, all prompts and • After the “Ready” prompt and the following beep, say voice commands will be in that language. “Emergency” and the Uconnect™ Phone will instruct the paired mobile phone to call the emergency numNOTE: After every Uconnect™ Phone language change ber. This feature is supported in the U.S., Canada, and operation, only the language-specific 32-name phoneMexico. book is usable.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 WARNING! To use your Uconnect™ Phone System in an emergency, your mobile phone must be: • turned on, • paired to the Uconnect™ System, • and have network coverage. Mexico City in Mexico). Please refer to the 24-Hour “Towing Assistance” coverage details on the DVD in the Warranty Information Booklet and the 24-Hour Towing Assistance references. • If supported, this number may be programmable on some systems.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE is also to be used for navigating through an automated Working With Automated Systems This method is used in instances where one generally has customer service center menu structure, and to leave a to press numbers on the mobile phone keypad while number on a pager. navigating through an automated telephone system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Barge In — Overriding Prompts The “Voice Command” button can be used when you wish to skip part of a prompt and issue your voice command immediately. For example, if a prompt is asking “Would you like to pair a phone, clear a...,” you button and say, “Pair a Phone” to could press the select that option without having to listen to the rest of the voice prompt.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Certain brands of mobile phones do not send the dial ring to the Uconnect™ Phone to play it on the vehicle audio system, so you will not hear it. Under this situation, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 List Paired Mobile Phone Names • Press the button to begin. • After the “Ready” prompt and the following beep, say “Setup Phone Pairing”. • When prompted, say “List Phones”. • After the “Ready” prompt and the following beep, say “Setup Select Phone” and follow the prompts. • You can also press the button at any time while the list is being played, and then choose the phone that you wish to select. • The selected phone will be used for the next phone call.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • You can also press the button at any time while the • Press the button and say the “Voice Training, list is being played, and then choose the phone you System Training, or Start Voice Training” command. wish to delete. You can either press the Uconnect™ Phone button to Things You Should Know About Your Uconnect™ restore the factory setting or repeat the words and Phone phrases when prompted by the Uconnect™ Phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 This will delete all phone pairing, phone book entries, and other settings in all language modes. The System will prompt you before resetting to factory settings. Voice Command • For best performance, adjust the rearview mirror to provide at least 1⁄2 in (1 cm) gap between the overhead console (if equipped) and the mirror. • Always wait for the beep before speaking.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Phonebook (Downloaded and Uconnect™ Phone Local) name recognition rate is optimized when the entries are not similar. • Numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero” not “eight hundred”. • You can say “O” (letter “O”) for “0” (zero). • low road noise, • smooth road surface, • fully closed windows, • dry weather conditions, and • operation from the driver’s seat.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 After reading a message, you can “Reply” or “Forward” Recent Calls If your phone supports “Automatic Phonebook Down- the message using Uconnect™ Phone. load”, Uconnect™ Phone can list your Outgoing, IncomSend Messages: ing and Missed Calls. You can send messages using Uconnect™ Phone. To send a new message: SMS Uconnect™ Phone can read or send new messages on • Press the button. your phone.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE List of Preset Messages: 11. See You in 15 minutes 1. Yes 12. I am on my way 2. No 13. I’ll be late 3. Where are you? 14. Are you there yet? 4. I need more direction. 15. Where are we meeting? 5. L O L 16. Can this wait? 6. Why 17. Bye for now 7. I love you 18. When can we meet 8. Call me 19. Send number to call 9. Call me later 20. Start without me 10.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Turn SMS Incoming Announcement ON/OFF Turning the SMS Incoming Announcement OFF will stop the system from announcing the new incoming messages. • Press the button. Bluetooth威 Communication Link Mobile phones have been found to lose connection to the Uconnect™ Phone. When this happens, the connection can generally be reestablished by switching the phone off/on. Your mobile phone is recommended to remain in Bluetooth威 ON mode.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 3
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Alternate(s) Primary call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 3
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no other pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call Uconnect™ Tutorial try again voice training work yes
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you ever wish to interrupt the system while it lists The system will best recognize your speech if the winbutton, listen dows are closed, and the heater/air conditioning fan is options, press the Voice Command set to low. for the beep, and say your command. button while the Pressing the Voice Command system is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can add or change commands.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 3. Use the ON/OFF VOLUME rotary knob to adjust the Radio AM volume to a comfortable level while the Voice Command To switch to the AM band, say “AM” or “Radio AM”. In system is speaking. Please note the volume setting for this mode, you may say the following commands: Voice Command is different than the audio system.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Menu Radio” (to switch to the radio menu) • “Main Menu” (to switch to the main menu) Disc To switch to the disc mode, say “Disc”. In this mode, you may say the following commands: Satellite Radio • “Track” (#) (to change the track) To switch to satellite radio mode, say “Sat” or “Satellite Radio”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 − “Continue” (to continue recording) • “Switch to system setup” − “Delete” (to delete the recording) • “Change to setup” • “Play Memos” (to play previously recorded memos) • “Main menu setup” or — During the playback you may press the Voice • “Switch to setup” button to stop playing memos.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training For users experiencing difficulty with the system recognizing their voice commands or numbers the Uconnect™ Voice “Voice Training” feature may be used. button, say “System 1. Press the Voice Command Setup” and once you are in that menu then say “Voice Training.” This will train your own voice to the system and will improve recognition. WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Adjusting The Seat Forward Or Rearward The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position is reached. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the rear of the seat switch, the seat will move in the direction of the switch.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reclining The Seatback The angle of the seatback can be adjusted forward or backward. Push the seatback switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position is reached. WARNING! (Continued) • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Press the switch once to select HIGH-level Heated Seats — If Equipped There are two heated seat switches that allow the driver heating. Press the switch a second time to select and passenger to operate the seats independently. The LOW-level heating. Press the switch a third controls for each heater are located near the bottom time to shut the heating elements OFF.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. • Do not place anything on the seat that insulates against heat, such as a blanket or cushion.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. Driver Seat Manual Height Adjuster — If Equipped A lever style height adjustment feature enhances comfort for petite as well as tall drivers.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reclining Seats The recliner control is on the side of the seat. To recline, lean forward slightly before lifting the lever, then lean back to the desired position and release the lever. Lean forward and lift the lever to return the seatback to its normal position. Seatback Adjustment WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Lumbar Support — If Equipped Fold-Flat Front Passenger Seat This feature allows you to increase or decrease the The recline handle on the front passenger seat also amount of lumbar support. The control lever is located releases the seatback to fold forward. on the outboard side of the driver’s seatback. Turn the control lever downward to increase and upward to decrease the desired amount of lumbar support.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The hard seatback features a work surface and a molded Head Restraints Head restraints are designed to reduce the risk of injury rim for retaining items stored on the seatback panel. by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Active Head Restraints — Front Seats Active Head Restraints are passive, deployable components, and vehicles with this equipment cannot be readily identified by any markings, only through visual inspection of the head restraint. The head restraint will be split in two halves, with the front half being soft foam and trim, the back half being decorative plastic. To raise the head restraint, pull upward on the head restraint.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For comfort the Active Head Restraints can be tilted forward and rearward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head. Active Head Restraint (Tilted) NOTE: • The head restraints should only be removed by qualified technicians, for service purposes only.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 • In the event of deployment of an Active Head Restraint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Before Starting Your Vehicle” for further information. WARNING! • Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Rear Seat To provide additional storage area, the rear seatback can be folded forward. Pull on the loops shown in the picture to fold down either or both seatbacks. When returning the rear seat back to the upright position, be sure the seatback is latched. Folding Rear Seats WARNING! • Be certain that the seatback is securely locked into position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Folding Rear Seat Center Armrest TO OPEN AND CLOSE THE HOOD The rear seat is equipped with a folding armrest with To open the hood, two latches must be released. cupholders. 1. Pull the hood release lever located under the left side of the instrument panel.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Lift the secondary latch located under the front edge of the hood, near the center and raise the hood. Hood Prop Rod Hole Location Hood Safety Catch Use the hood prop rod to secure the hood in the open position. Place the upper end of the prop rod in the hole on the left underside of the hood. Before closing the hood, make sure to stow the prop rod in its proper location.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 CAUTION! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. passing light, fog lights, instrument panel light dimming and turn signals. The multifunction lever is located on the left side of the steering column. 3 WARNING! Be sure the hood is fully latched before driving your vehicle.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights And Parking Lights Turn the end of the multifunction lever to the first detent for parking light operation. Turn to the second detent for headlight operation. Automatic Headlights — If Equipped Turning the end of the multifunction lever to the third detent (AUTO), will activate the automatic headlight system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 With the engine running and the multifunction lever in the AUTO position, the headlights will turn on and turn off based on the surrounding light levels. Headlight Time Delay There is also a feature that delays turning off the vehicle lights for 30, 60 or 90 seconds after the ignition switch is turned OFF. To activate the headlight delay, the multifunction lever must be rotated to the off position after the ignition switch is turned OFF.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lane Change Assist Fog Lights — If Equipped Tap the lever up or down once, without moving beyond The front fog light switch is on the multifunction the detent, and the turn signal (right or left) will flash lever. To activate the front fog lights, turn on the three times then automatically turn off. parking lights or the low beam headlights and pull out the end of the multifunction lever.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 NOTE: The front fog lights will only operate with the Lights On Reminder headlights on low beam. Selecting high beam headlights If the headlights or parking lights are on after the ignition is turned OFF, a chime will sound to alert the driver will turn off the front fog lights. when the driver’s door is opened.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the center portion of the lever upward to the last Map/Reading/Interior Lights These lights are mounted between the sun visors above detent to turn on the interior lighting. the rearview mirror. Each light can be turned on by pressing the barrel. Press the barrel a second time to turn the light off. Both of these lights can swivel so that the light can be aimed at a specific spot, if desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 There is a second light located midway back in the headliner. To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or are on because a door is open. To restore interior light operation, either turn the ignition switch ON or cycle the light switch.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the end of the lever to the LO position for WINDSHIELD WIPERS AND WASHERS The wipers and washers are operated by a switch low-speed wiper operation, or to the HI position for on the control lever. The lever is located on the high-speed wiper operation. right side of the steering column.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 are operating. The wipers will resume operation when then turn the end of the lever to select the desired delay you turn the ignition switch to the ON position again. interval. There are five delay settings, which allow you to regulate the wipe interval from a minimum of one cycle CAUTION! every second to a maximum of approximately 18 seconds between cycles. • Turn the windshield wipers off when driving through an automatic car wash.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The wiper delay times depend on vehicle speed. If the vehicle is moving less than 10 mph (16 km/h), delay times will be doubled. Windshield Washers To use the washer, pull the windshield wiper/washer control lever toward you and hold it for as long as washer spray is desired. WARNING! Sudden loss of visibility through the windshield could lead to a collision. You might not see other vehicles or other obstacles.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Headlights With Wipers Feature (Available With Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the multifunction lever (on the left side of the steering column) is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column. To unlock the steering column, pull the control handle outward. To tilt the steering column, move the steering wheel upward or downward as desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steering wheel.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE System can be reactivated by pushing the Electronic To Set A Desired Speed Speed Control ON/OFF button and resetting the desired Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button vehicle set speed. and release. Release the accelerator and the vehicle will To Activate operate at the selected speed. Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 decrease until the button is released. Release the button To Resume Speed To resume a previously set speed, push the RES (+) when the desired speed is reached, and the new set speed button and release. Resume can be used at any speed will be established. above 20 mph (32 km/h). Pressing the SET (-) button once will result in a 1 mph (2 km/h) decrease in set speed.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On steep hills, a greater speed loss or gain may occur so The HomeLink威 buttons, located on either the overhead it may be preferable to drive without Electronic Speed console, headliner or sunvisor, designate the three differControl. ent HomeLink威 channels. The HomeLink威 indicator is located above the center button. WARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Before You Begin Programming HomeLink姞 Be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmission of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink威 system. Erase all channels before you begin programming.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If you have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the Internet at www.HomeLink.com for information or assistance. Programming A Rolling Code For programming garage door openers that were manufactured after 1995. These garage door openers can be identified by the “LEARN” or “TRAIN” button located where the hanging antenna is attached to the garage door opener.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 3. Simultaneously press and hold both the Homelink威 NOTE: You have 30 seconds in which to initiate the next button you want to program and the hand-held transmit- step after the LEARN button has been pressed. ter button. 6. Return to the vehicle and press the programmed 4. Continue to hold both buttons and observe the indi- HomeLink威 button twice (holding the button for two cator light. The Homelink威 indicator will flash slowly seconds each time).
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Press and hold the desired HomeLink威 button until 4. Continue to hold both buttons and observe the indithe indicator light begins to flash after 20 seconds. Do not cator light. The Homelink威 indicator will flash slowly and then rapidly after Homelink威 has received the frerelease the button. quency signal from the hand-held transmitter. Release 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 to pick up the signal during programming. Similar to this Reprogramming A Single HomeLink威 Button To reprogram a channel that has been previously trained, Canadian law, some U.S. gate operators are designed to time-out in the same manner. follow these steps: It may be helpful to unplug the device during the cycling process to prevent possible overheating of the garage 2. Press and hold the desired HomeLink威 button until door or gate motor.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Watch for the HomeLink威 indicator to change flash Reprogramming A Single HomeLink威 Button rates. When it changes, it is programmed. It may take up To reprogram a channel that has been previously trained, to 30 seconds or longer in rare cases. The garage door follow these steps: may open and close while you are programming. 1. Turn the ignition switch to the ON/RUN position. 5. Press and hold the programmed HomeLink威 button 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Security Troubleshooting Tips It is advised to erase all channels before you sell or turn If you are having trouble programming HomeLink威, here in your vehicle. are some of the most common solutions: To do this, press and hold the two outside buttons for • Replace the battery in the original hand-held transmitter. 20 seconds until the red indicator flashes. Note that all channels will be erased.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Your motorized door or gate will open and close while you are programming the universal transceiver. Do not program the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards. This includes most garage door opener models manufactured after 1982.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 POWER SUNROOF — IF EQUIPPED The sunroof controls are mounted between the dome/ reading lights. Power Sunroof Switch WARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express Press the switch rearward and release it within one-half second and the sunroof will open automatically from any position. The sunroof will open fully and stop automatically. This is called “Express Open”. During Express Open operation, any movement of the sunroof switch will stop the sunroof. position. The sunroof will close fully and stop automatically. This is called “Express Close”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 NOTE: Pinch protection is disabled while the switch is windows down, or the sunroof (if so equipped) is in certain open or partially open positions. This is a normal pressed. occurrence and can be minimized. If the buffeting occurs Venting Sunroof — Express with the rear windows open, then open the front and rear Press and release the Vent button within one half second windows together to minimize the buffeting.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For vehicles equipped with the EVIC, the power sunroof switch will remain active for up to 10 minutes after the ignition switch is turned OFF. Opening either front door will cancel this feature. The time is programmable. Refer to “Electronic Vehicle Information Center (EVIC)/ Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 The center console power outlet is powered directly from the battery (power available at all times). Items plugged into this power outlet may discharge the battery and/or prevent the engine from starting. NOTE: To ensure proper operation a MOPAR威 knob and element must be used.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. • Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your New Vehicle Limited Warranty.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 WARNING! CAUTION! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CIGAR LIGHTER AND ASH RECEIVER — IF EQUIPPED An optional ash receiver is available from your authorized dealer and will fit in the center console front cupholder. The optional ash receiver also comes with a cigar lighter that can be used with the power outlets. Refer to “Power Outlets” in “Understanding the Features of Your Vehicle” for further information. CUPHOLDERS There are two cupholders located in the center console for the front passengers.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 STORAGE Glovebox Storage Compartment The glovebox storage compartment is located on the right side of the instrument panel. 3 Rear Bottle Holder WARNING! If containers of hot liquid are placed in the bottle holder, they can spill when the door is closed, burning the occupants. Be careful when closing the doors to avoid injury.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pull on the handle to open the glovebox. comfort. The center console can be used for storage and is also equipped with an electrical power outlet. Refer to “Power Outlets” in “Understanding The Feature of Your Vehicle” for further information. Opened Glovebox CONSOLE FEATURES Storage Center Console The center console is located between the front driver Two separate storage compartments are also located and passenger seats.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 NOTE: • A notch in the front of the console base allows for use of a cellular phone while it is plugged into the power outlet with the armrest latched down. • The power outlet can also energize the cigar lighter in the optional cup holder ash receiver. WARNING! Center Console Storage The top compartment holds small items, such as a pen and note pad, while the larger bottom compartment will hold CDs and alike.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CARGO AREA FEATURES The 60/40 split-folding rear seat provides cargo-carrying versatility. The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters. When the seats are folded down, they provide a continuous, nearly flat extension of the load floor. When the seatback is folded to the upright position, make sure it is latched by strongly pulling on the top of the seatback above the seat strap.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible. Place as much cargo as possible in front of the rear axle. Too much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway. 3 Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or become a dangerous projectile in a sudden stop or collision.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rear Window Defroster The rear window defroster button is located on the climate control (Mode) knob. Press this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after approximately 10 minutes. For an additional five minutes of operation, press the button a second time.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 189 ▫ Oil Change Required — If Equipped . . . . . . 210 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 190 ▫ EVIC Main Menu . . . . . . . . . . . . . . . . . . . . 211 䡵 Instrument Cluster — R/T . . . . . . . . . . . . . . . 191 ▫ Compass Display . . . . . . . . . . . . . . . . . . . . 212 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 192 ▫ Average Fuel Economy . . . . . . .
186 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Personal Settings (Customer-Programmable Features) . . . . . . . 216 䡵 Media Center 230 (REQ) — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) . . . . . . . . . . . . . . . . . . 219 ▫ Operating Instructions - Radio Mode . . . . . . 219 䡵 Media Center 730N/430/430N (RHR/RER/ RBZ/RHB) CD/DVD/HDD/NAV — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238 ▫ Operating Instructions (Voice Command System) — If Equipped . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 187 䡵 Media Center 130 With Satellite Radio (Sales Code RES+RSC). . . . . . . . . . . . . . . . . . . 247 ▫ Controlling The iPod威 Or External USB Device Using Radio Buttons . . . . . . . . . . . . . 264 ▫ Operating Instructions — Radio Mode . . . . . 247 ▫ Play Mode . . . . . . . . . . . . . . . . . . . . . . . . . 265 ▫ Operation Instructions — CD Mode For CD And MP3 Audio Play . . . . . . . . . . . . . . . . . 253 ▫ List Or Browse Mode . . . . . . . . . . . . . .
188 UNDERSTANDING YOUR INSTRUMENT PANEL 䡵 Climate Controls . . . . . . . . . . . . . . . . . . . . . . 272 ▫ Manual Heating And Air Conditioning . . . . . 273 ▫ Automatic Temperature Control (ATC) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 277 ▫ Operating Tips . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 189 INSTRUMENT PANEL FEATURES 4 1 2 3 4 — Air Outlet — Side Window Demister Outlet — Instrument Cluster — Radio 5 6 7 8 — — — — Passenger Airbag Glove Compartment Heated Seat Switch — If Equipped Hazard Switch 9 — Power Outlet 10 — Climate Controls 11 — Ignition Switch 12 — Trunk Release Button
190 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL 191 INSTRUMENT CLUSTER — R/T 4
192 UNDERSTANDING YOUR INSTRUMENT PANEL removes this heat. You can also turn the Temperature control to maximum heat, the Mode control to Floor and 1. Temperature Gauge the Fan control to High. This allows the heater core to act The temperature gauge shows engine coolant temperaas a supplement to the radiator and aids in removing heat ture. Any reading below the red mark of the gauge shows from the engine cooling system. that the engine cooling system is operating properly.
UNDERSTANDING YOUR INSTRUMENT PANEL 193 If jump starting is required, refer to “Jump Starting 5. Low Fuel Light When the fuel level drops to approximately 2.0 gal- Procedures” in “What To Do In Emergencies”. lons (7.6 Liters), the fuel symbol will light and a 7. Air Bag Warning Light single chime will sound. This light will turn on for four to eight seconds NOTE: This light will remain on until a minimum of as a bulb check when the ignition switch is first turned to ON/RUN.
194 UNDERSTANDING YOUR INSTRUMENT PANEL flash or remain on continuously. Refer to “Occupant 10. Engine Temperature Warning Light Restraints” in “Things To Know Before Starting Your This light warns of an overheated engine condition. As engine coolant temperatures rise and the Vehicle” for further information. gauge approaches H , this indicator will illuminate 9. Oil Pressure Warning Light and a single chime will sound after reaching a set This light indicates low engine oil pressure. The threshold.
UNDERSTANDING YOUR INSTRUMENT PANEL 195 If brake failure is indicated, immediate repair is neces11. Brake Warning Light This light monitors various brake functions, sary. including brake fluid level and parking brake WARNING! application. If the brake light turns on it may indicate that the parking brake is applied, that Driving a vehicle with the brake light on is dangerthe brake fluid level is low, or that there is a problem with ous. Part of the brake system may have failed.
196 UNDERSTANDING YOUR INSTRUMENT PANEL off unless the parking brake is applied or a brake fault is NOTE: You must apply the brakes before shifting from detected. If the light does not illuminate, have the light PARK. inspected by an authorized dealer. 14. Odometer Display/Trip Odometer Display The light also will turn on when the parking brake is The odometer display shows the total distance the veapplied with the ignition switch in the ON/RUN posi- hicle has been driven. U.S.
UNDERSTANDING YOUR INSTRUMENT PANEL 197 The two trip odometers show individual trip mileage. To switch from odometer to trip odometers, press and release the Trip Odometer button. To reset a trip odometer, display the desired trip odometer to be reset then push and hold the button until the display resets (approximately two seconds). Refer to “Trip Odometer Button” for additional information.
198 UNDERSTANDING YOUR INSTRUMENT PANEL gASCAP If the vehicle diagnostic system detects a leak or change in the evaporative system, or the fuel filler cap is loose, improperly installed, or damaged, the words “gASCAP” will display in the odometer display area. If this occurs, tighten the fuel filler cap properly and press the odometer reset button to turn off the “gASCAP” message. (Refer to “Onboard Diagnostic System — OBDII” in “Maintaining Your Vehicle” for further information).
UNDERSTANDING YOUR INSTRUMENT PANEL 199 4. For vehicles equipped with the Electronic Vehicle 17. Electronic Throttle Control (ETC) Indicator Light This light informs you of a problem with the Information Center (EVIC), refer to “Electronic Vehicle Electronic Throttle Control (ETC) system. If a Information Center (EVIC)”. problem is detected, the light will come on 15. Cruise Indicator — If Equipped while the engine is running.
200 UNDERSTANDING YOUR INSTRUMENT PANEL 21. Vehicle Security Light — If Equipped 18. Park/Headlight ON Indicator — If Equipped This indicator will illuminate when the park This light will flash rapidly for approximately 16 seconds when the alarm system is arming. lights or headlights are turned on. The light will begin to flash slowly indicating that the system is armed. The light will stop flashing when the vehicle is disarmed. 19. Electronic Stability Control (ESC) OFF Indicator Light — If Equipped 22.
UNDERSTANDING YOUR INSTRUMENT PANEL 201 (kilometers) at speeds greater than 30 mph (48 km/h), see 24. Tire Pressure Monitoring Telltale Light Each tire, including the spare (if provided), your authorized dealer as soon as possible to have the should be checked monthly when cold and problem diagnosed and corrected. inflated to the inflation pressure recommended NOTE: by the vehicle manufacturer on the vehicle • The “ESC Off Indicator Light” and the “ESC placard or tire inflation pressure label.
202 UNDERSTANDING YOUR INSTRUMENT PANEL reduces fuel efficiency and tire tread life, and may affect alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the the vehicle’s handling and stopping ability.
UNDERSTANDING YOUR INSTRUMENT PANEL 203 25. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL) is part of an onboard diagnostic system called OBD that monitors emissions, engine, and automatic transmission control systems. The light will illuminate when the key is in the ON/RUN position before engine start. If the bulb does not come on when turning the key from LOCK to ON/RUN, have the condition checked promptly.
204 UNDERSTANDING YOUR INSTRUMENT PANEL 26. Anti-Lock Brake (ABS) Light — If Equipped This light monitors the ABS. This light will come on when the ignition key is turned to the ON/RUN position and may stay on for approximately three seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 205 WARNING! If the Transmission Temperature Warning Light is illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. MINI-TRIP COMPUTER — IF EQUIPPED The Mini-Trip Computer is located in the instrument cluster and features a driver-interactive trip information and temperature display.
206 UNDERSTANDING YOUR INSTRUMENT PANEL Control Buttons RESET Button To reset the display shown, turn the ignition switch to the ON position, then press and hold the RESET button located on the steering wheel. The following displays can be reset or changed: • Trip A • Trip B Trip Odometer (ODO) This display shows the distance traveled since the last reset. Press and release the STEP button on the instrument cluster to switch from odometer, to Trip A or Trip B.
UNDERSTANDING YOUR INSTRUMENT PANEL 207 The EVIC consists of the following: ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED • Compass Heading Display (N, S, E, W, NE, NW, SE, The Electronic Vehicle Information Center (EVIC) feaSW) tures a driver-interactive display that is located in the • Mileage (Avg/MPG) instrument cluster. • Miles To Empty • Low Tire Information (Tire Pressure Monitor System (TPMS) Displays) — if equipped • Timer • Units • System Warnings (Door Ajar, etc.
208 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: Press and release the MENU button to advance the display to each of the EVIC Main Menu features. Upon reaching the last item in the MENU Main Menu the EVIC will advance to the first Button item in the Main Menu with the next MENU button press and release.
UNDERSTANDING YOUR INSTRUMENT PANEL 209 Press and release the SELECT Button to accept • Right Rear Turn Signal Lamp Out (with a single a selection. The SELECT Button also resets chime) various Trip Functions.
210 UNDERSTANDING YOUR INSTRUMENT PANEL • Key In Ignition • Remote start aborted — Door ajar • Remote start aborted — Hood ajar • Remote start aborted — Trunk ajar • Remote start aborted — Fuel low • Remote start disabled — System fault • Oil Change Required (with a single chime) • Low Tire (with a graphic of the car showing which tire(s) is/are low - with a single chime). Refer to ⬙Tire Pressure Monitoring System⬙ in ⬙Starting and Operating⬙.
UNDERSTANDING YOUR INSTRUMENT PANEL 211 2. Fully depress the accelerator pedal slowly three times • within 10 seconds. • 3. Turn the ignition switch to the LOCK position. • NOTE: If the indicator message illuminates when you • start the vehicle, the oil change indicator system did not • reset. If necessary repeat this procedure. EVIC Main Menu To step to each main menu feature press and release the MENU button once for each step.
212 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Display The compass heading indicates the direction the vehicle is facing. Press and release the compass button to display one of eight COMPASS compass headings, the outside temperature, and audio information (if the radio is on) if Button the EVIC display is not already displaying this screen. EVIC will flash the “CAL” indicator until the compass is calibrated.
UNDERSTANDING YOUR INSTRUMENT PANEL 213 2. Press and release the MENU button until “Personal NOTE: Magnetic and battery powered devices, (such as Settings” displays in the EVIC. cell phones, iPod’s, radar detectors, PDA’s and laptops) should be kept away from the top of the instrument 3. Press and release the DOWN button until “Calibrate panel. This is where the compass module is located and Compass Yes” displays in the EVIC. such devices may interfere and cause false compass 4.
214 UNDERSTANDING YOUR INSTRUMENT PANEL To Change Compass Variance: Average Fuel Economy 1. Turn the ignition switch to the ON position. Leave the Shows the average fuel economy since the last reset. Average Fuel Economy can be reset by pressing and shift lever in PARK. holding the SELECT button (as prompted in the EVIC 2. Press and release the MENU button until “Personal display). Upon reset, the history information will be Settings” displays in the EVIC.
UNDERSTANDING YOUR INSTRUMENT PANEL 215 When the DTE value is less than 30 miles (48 km) • If the Tire Pressure System requires service, ⬙Check estimated driving distance, the DTE display will change TPM System⬙ is displayed. Tire PSI is an information to a text display of ⬙LOW FUEL”. This display will only function and cannot be reset. continue until the vehicle runs out of fuel.
216 UNDERSTANDING YOUR INSTRUMENT PANEL EVIC Units Selection (UNITS IN Display) Personal Settings (Customer-Programmable Features) Displays the units used for the Outside Temperature, Personal Settings allows the driver to set and recall Average Fuel Economy, Distance to Empty and Tire features when the automatic transaxle is in PARK. Pressure features. Press and Release the SELECT button Press and release the MENU button until “Personal to toggle units between ⬙U.S.⬙ and ⬙METRIC⬙.
UNDERSTANDING YOUR INSTRUMENT PANEL 217 Auto Unlock on Exit When ON is selected and the transaxle is in the PARK or NEUTRAL position, all doors will unlock when the driver’s door is opened. To make your selection, press the SELECT button until ON or OFF appears. RKE Unlock When “Driver Door 1st Press” is selected, only the driver’s door will unlock on the first press of the Remote Keyless Entry (RKE) transmitter UNLOCK button.
218 UNDERSTANDING YOUR INSTRUMENT PANEL Headlamps With Wipers (Available with Auto Headlights Only) When ON is selected, and the headlight switch is in the AUTO position, the headlights will turn on approximately 10 seconds after the wipers are turned on. The headlights will also turn off when the wipers are turned off if they were turned on by this feature. To make your selection, press the SELECT button until ON or OFF appears. Opening either front vehicle door will cancel this feature.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 MEDIA CENTER 230 (REQ) — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. NOTE: The radio sales code is located on the lower right Power Switch/Volume Control (Rotary) side of the radio faceplate. Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio.
220 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it.
UNDERSTANDING YOUR INSTRUMENT PANEL 221 Clock Setting Procedure INFO Button Press the INFO button for an RDS station (one with call 1. Press and hold the TIME button until the hours blink. letters displayed). The radio will return a Radio Text 2. Adjust the hours by turning the right side TUNE/ message broadcast from an FM station (FM mode only). SCROLL control knob. RW/FF 3.
222 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones. MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be sePush the rotary TUNE/SCROLL control knob a third lected.
UNDERSTANDING YOUR INSTRUMENT PANEL 223 Program Type Information Jazz News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk 16-Digit Character Display Inform Jazz News Nostalga Oldies Persnlty Public R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R & B Sports Talk Program Type Top 40 Weather 16-Digit Character Display Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be
224 UNDERSTANDING YOUR INSTRUMENT PANEL • DVD Enter - When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current highlighted selection. Use the remote control to scroll up and down the menu (if equipped). • Angle – Repeatedly pressing SELECT will change the viewing angle if supported by the DVD disc (if equipped).
UNDERSTANDING YOUR INSTRUMENT PANEL 225 • Set Home Clock - Pressing the SELECT button allows you to set the clock. Turn the TUNE/SCROLL control knob to adjust the hours and then press and turn the TUNE/SCROLL control knob to adjust the minutes. Press the TUNE/SCROLL control knob again to save changes. Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc).
226 UNDERSTANDING YOUR INSTRUMENT PANEL Audio DRC — If Equipped Selecting this item allows you to limit maximum audio dynamic range. The default is set to ⬙High,⬙ and under this setting, dialogues will play at 11 db higher than if the setting is ⬙Normal.⬙ NOTE: The user will have to set these defaults before loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the customer-preferred settings.
UNDERSTANDING YOUR INSTRUMENT PANEL 227 You may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM, 12 FM, and 12 Satellite (if equipped) stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by pressing the pushbutton twice.
228 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The ignition switch must be in the ON or ACC Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton position to operate the radio. with the corresponding number (1-6) where the LOAD Button — Loading Compact Disc(s) CD was loaded and the disc will unload and Press the LOAD button and the pushbutton with the move to the entrance for easy removal.
UNDERSTANDING YOUR INSTRUMENT PANEL 229 SCAN Button (CD MODE) Notes On Playing MP3/WMA Files Press the SCAN button to scan through each track on the The radio can play MP3/WMA files; however, acceptable CD currently playing. MP3/WMA file recording media and formats are limited. When writing MP3/WMA files, pay attention to the TIME Button (CD MODE) following restrictions. Press this button to change the display from a large CD playing time display to a small CD playing time display.
230 UNDERSTANDING YOUR INSTRUMENT PANEL The radio uses the following limits for file systems: • Maximum number of directory levels: 8 • Maximum number of files: 255 If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files • Maximum number of characters in file/folder names: named with the *.
UNDERSTANDING YOUR INSTRUMENT PANEL 231 MPEG Specification MPEG-1 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48 160, 128, 144, 112, 96, 80, 64, 56, 48 MPEG-2 Audio Layer 3 24, 22.05, 16 WMA Specification Sampling Frequency (kHz) Bit Rate (kbps) 44.1 and 48 48, 64, 96, 128, 160, 192 VBR WMA Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium.
232 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files).
UNDERSTANDING YOUR INSTRUMENT PANEL 233 SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. Operating Instructions — Voice Command System (If Equipped) For the radio, Refer to “Voice Command” in the Uconnect™ User Manual located on the DVD for further details.
234 UNDERSTANDING YOUR INSTRUMENT PANEL Macrovision This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. NOTE: Sirius service is not available in Hawaii and has limited coverage in Alaska.
UNDERSTANDING YOUR INSTRUMENT PANEL 235 placed within the line of sight of the antenna will cause decreased performance. Larger luggage items such as To access the ESN/SID, refer to the following steps: bikes should be placed as far rearward as possible, within the loading design of the rack. Do not place items directly ESN/SID Access With the ignition switch in the ON/RUN or ACC posi- on or above the antenna.
236 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Uconnect™ Multimedia (Satellite) Mode INFO Button Pressing the INFO button will cycle the display information between Artist, Song Title, and Composer (if availNOTE: The ignition switch must be in the ON/RUN or able). Also, pressing and holding the INFO button for an ACC position to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 237 or turning the TUNE/SCROLL control knob within five SET Button – To Set the Pushbutton Memory seconds will allow the program format type to be selected. When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. Toggle the MUSIC TYPE button again to select the music The symbol SET 1 will now show in the display window. type.
238 UNDERSTANDING YOUR INSTRUMENT PANEL Buttons 1 - 6 MEDIA CENTER 130 (SALES CODE RES) These buttons tune the radio to the channels that you NOTE: The radio sales code is located on the lower right commit to pushbutton memory (12 Satellite stations). side of the radio faceplate. MEDIA CENTER 730N/430/430N (RHR/RER/RBZ/ RHB) CD/DVD/HDD/NAV — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate.
UNDERSTANDING YOUR INSTRUMENT PANEL 239 SEEK Buttons Press and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON or ACC listenable station in AM/FM mode. Press the right switch position to operate the radio. to seek up and the left switch to seek down. The radio Power Switch/Volume Control (Rotary) will remain tuned to the new station until you make Push the ON/VOLUME control knob to turn on the another selection. Holding either button will bypass radio.
240 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Adjust the minutes using the right side TUNE/ Push the rotary TUNE/SCROLL control knob a second SCROLL control knob. Press the TUNE/SCROLL control time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the knob to save time change. mid-range tones. 5. To exit, press any button/knob, or wait five seconds. Push the rotary TUNE/SCROLL control knob a third RW/FF time and TREBLE will display.
UNDERSTANDING YOUR INSTRUMENT PANEL 241 Push the rotary TUNE/SCROLL control knob again to You may add a second station to each pushbutton by repeating the above procedure with this exception: Press exit setting tone, balance, and fade. the SET/RND button twice and SET 2 will show in the AM/FM Button display window. Each button can be set for SET 1 and Press the buttons to select either AM or FM mode. SET 2 in both AM and FM.
242 UNDERSTANDING YOUR INSTRUMENT PANEL If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and • The ignition switch must be in the ON or ACC seconds. Play will begin at the start of track 1. position to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 243 If you have ejected a disc and have not removed it within RW/FF 10 seconds, it will be reloaded. If the CD is not removed, Press and hold the FF (Fast Forward) button and the CD player will begin to fast forward until FF is released, or the radio will reinsert the CD but will not play it. RW or another CD button is pressed. The RW (Reverse) A disc can be ejected with the radio and ignition OFF. button works in a similar manner.
244 UNDERSTANDING YOUR INSTRUMENT PANEL Notes on Playing MP3 Files • Maximum number of files: 255 The radio can play MP3 files; however, acceptable MP3 • Maximum number of folders. (The radio display of file file recording media and formats are limited. When names and folder names is limited. For large numbers writing MP3 files, pay attention to the following restricof files and/or folders, the radio may be unable to tions.
UNDERSTANDING YOUR INSTRUMENT PANEL 245 Discs created with an option such as ⬙keep disc open after writing⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
246 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
UNDERSTANDING YOUR INSTRUMENT PANEL 247 MEDIA CENTER 130 WITH SATELLITE RADIO (SALES CODE RES+RSC) Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC NOTE: The radio sales code is located on the lower right position to operate the radio. side of the radio faceplate. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
248 UNDERSTANDING YOUR INSTRUMENT PANEL to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone feature (if equipped). Refer to “Uconnect™ Phone” in “Understanding The Features Of Your Vehicle”.
UNDERSTANDING YOUR INSTRUMENT PANEL 249 3. After adjusting the hours, press the right side TUNE/ INFO Button SCROLL control knob to set the minutes. The minutes Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text will begin to blink. message broadcast from an FM station (FM mode only). 4. Adjust the minutes using the right side TUNE/ SCROLL control knob.
250 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones. MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be sePush the rotary TUNE/SCROLL control knob a third lected.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 Program Type Information Jazz News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk 16-Digit Character Display Inform Jazz News Nostalga Oldies Persnlty Public R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R&B Sports Talk Program Type Top 40 Weather 16-Digit Character Display Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be t
252 UNDERSTANDING YOUR INSTRUMENT PANEL hours, press the TUNE/SCROLL control knob to set the minutes. The minutes will begin to blink. Adjust the minutes using the right side TUNE/SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. AM/FM Button Press the button to select either AM or FM mode. SET/RND Button — To Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory, press the SET/RND button.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and • The ignition switch must be in the ON or ACC seconds. Play will begin at the start of track 1. position to operate the radio.
254 UNDERSTANDING YOUR INSTRUMENT PANEL If you have ejected a disc and have not removed it within RW/FF 10 seconds, it will be reloaded. If the CD is not removed, Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or the radio will reinsert the CD but will not play it. another CD button is pressed. The RW (Reverse) button A disc can be ejected with the radio and ignition OFF. works in a similar manner.
UNDERSTANDING YOUR INSTRUMENT PANEL 255 Notes On Playing MP3 Files • Maximum number of files: 255 The radio can play MP3 files; however, acceptable MP3 • Maximum number of folders. (The radio display of file file recording media and formats are limited. When names and folder names is limited. For large numbers writing MP3 files, pay attention to the following restricof files and/or folders, the radio may be unable to tions.
256 UNDERSTANDING YOUR INSTRUMENT PANEL Discs created with an option such as ⬙keep disc open after writing⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
UNDERSTANDING YOUR INSTRUMENT PANEL 257 Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob.
258 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds to return to ⬙elapsed time⬙ display. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. TIME Button (Auxiliary Mode) Press this button to change the display to time of day.
UNDERSTANDING YOUR INSTRUMENT PANEL 259 radio system in your vehicle. Sirius will supply a welcome kit that contains general information, including how to setup your on-line listening account. For further information, call the toll-free number 888-539-7474, or visit the Sirius web site at www.sirius.com, or at www.siriuscanada.ca for Canadian residents. using the TUNE/SCROLL control knob until Sirius ID is selected. Press the TUNE/SCROLL control knob and the Sirius ID number will display.
260 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next following reasons: channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will • The vehicle is parked in an underground parking remain tuned to the new channel until you make another structure or under a physical obstacle. selection.
UNDERSTANDING YOUR INSTRUMENT PANEL 261 additional three seconds will make the radio display the Toggle the MUSIC TYPE button again to select the music Song Title all of the time (press and hold again to return type. to normal display). By pressing the SEEK button when the Music Type function is active, the radio will be tuned to the next RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons channel with the same selected Music Type name.
262 UNDERSTANDING YOUR INSTRUMENT PANEL SET Button – To Set the Pushbutton Memory When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. The symbol SET 1 will now show in the display window. Select the button (1-6) you wish to lock onto this channel and press and release that button. If a button is not selected within five seconds after pressing the SET button, the channel will continue to play but will not be stored into pushbutton memory.
UNDERSTANDING YOUR INSTRUMENT PANEL 263 This feature allows an iPod威 or external USB device to be Connecting The iPod姞 Or External USB Device plugged into the USB port, located in the center of the Use the connection cable to connect an iPod威 or external USB device to the vehicle’s USB connector port which is instrument panel below the climate controls. located in the center of the instrument panel below the iPod威 control supports Mini, 4G, Photo, Nano, 5G iPod威 climate controls. and iPhone威 devices.
264 UNDERSTANDING YOUR INSTRUMENT PANEL Once the audio device is connected and synchronized to • The audio device can be controlled using the radio the vehicle’s iPod威/USB/MP3 control system (iPod威 or buttons to Play, Browse, and List the iPod威 contents.
UNDERSTANDING YOUR INSTRUMENT PANEL 265 Play Mode • Jump backward in the current track by pressing and When switched to iPod威/USB/MP3 control mode, the holding the << RW button. Holding the << RW iPod威 or external USB device automatically starts Play button long enough will jump to the beginning of mode. In Play mode, the following buttons on the radio the current track.
266 UNDERSTANDING YOUR INSTRUMENT PANEL • While a track is playing, press the INFO button to see • RND button (available on sales code RES radio only): the associated metadata (artist, track title, album, etc.) Pressing this button toggles between Shuffle ON and for that track. Pressing the INFO button again jumps Shuffle OFF modes for the iPod威 or external USB to the next screen of data for that track.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 press the TUNE control knob to select and start playing the track. Turning the TUNE control knob fast will scroll through the list faster. During fast scroll, a slight delay in updating the information on the radio display may be noticeable. • During all List modes, the iPod威 displays all lists in “wrap-around” mode. So if the track is at the bottom of the list, just turn the wheel backward (counterclockwise) to get to the track faster.
268 UNDERSTANDING YOUR INSTRUMENT PANEL • MUSIC TYPE button: The MUSIC TYPE button is another shortcut button to the genre listing on your audio device. CAUTION! • Leaving the iPod威 or external USB device (or any supported device) anywhere in the vehicle in extreme heat or cold can alter the operation or damage the device. Follow the device manufacturer’s guidelines.
UNDERSTANDING YOUR INSTRUMENT PANEL 269 Play Mode When switched to BTSA mode, some audio devices can start playing music over the vehicle’s audio system, but some devices require the music to be initiated on the device first, then it will get streamed to the Uconnect™ phone system. Seven devices can be paired to the Uconnect™ phone system, but just one can be selected and played. Selecting Different Audio Device 1. Press PHONE button to begin. 2.
270 UNDERSTANDING YOUR INSTRUMENT PANEL Browse Browsing is not available on a BTSA device. Only the current song that is playing will display info. STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. The left and right controls are rocker-type switches with a pushbutton in the center of each switch. Reach behind the steering wheel to access the switches.
UNDERSTANDING YOUR INSTRUMENT PANEL 271 Right-Hand Switch Functions • Press the top of the switch to increase the volume. • Press the bottom of the switch to decrease the volume. Left-Hand Switch Functions For Media (i.e., CD) Operation • Press the top of the switch once to listen to the next track. • Press the button in the center of the switch to change • Press the bottom of the switch once either to listen to modes (i.e., AM, FM, etc.).
272 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particuCD/DVD DISC MAINTENANCE To keep a CD/DVD in good condition, take the following lar disc, it may be damaged (i.e., scratched, reflective precautions: coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known 1. Handle the disc by its edge; avoid touching the good disc before considering disc player service. surface. 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 273 Manual Heating And Air Conditioning Blower Control Rotate this control to regulate the amount of air forced through the ventilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position. There are four blower speeds. NOTE: For vehicles equipped with Remote Start, the climate controls will not function during Remote Start operation if the blower control is left in the “O” (Off) position.
274 UNDERSTANDING YOUR INSTRUMENT PANEL Temperature Control Mode Control (Air Direction) Rotate this control to regulate the temRotate this control to choose from sevperature of the air inside the passenger eral patterns of air distribution. You compartment. Rotating the dial left can select either a primary mode as into the blue area of the scale indicates identified by the symbols on the concooler temperatures, while rotating trol, or a blend of two of these modes.
UNDERSTANDING YOUR INSTRUMENT PANEL 275 NOTE: For all settings, except full cold or full hot, there Defrost is a difference in temperature between the upper and Air is directed through the windshield and side window demist outlets. Use this mode with maxilower outlets. The warmer air flows to the floor outlets. This feature gives improved comfort during sunny but mum blower and temperature settings for best windshield and side window defrosting. cool conditions.
276 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • When the ignition switch is turned to the LOCK • Continuous use of the Recirculation mode may make position, the recirculation feature will be cancelled. the inside air stuffy and window fogging may occur. Air Conditioning Control Extended use of this mode is not recommended. Press this button to engage the Air Conditioning.
UNDERSTANDING YOUR INSTRUMENT PANEL 277 • ECONOMY MODE If economy mode is desired, press the A/C button to turn OFF the indicator light and the A/C compressor. Then, move the temperature control to the desired temperature. Automatic Operation The Automatic Temperature Control system automatically maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger. Automatic Temperature Control (ATC) — If Equipped Operation of the system is quite simple. 1.
278 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Dial in the temperature you would like the system to maintain by rotating the Temperature Control knob. Once the comfort level is selected, the system will maintain that level automatically using the heating system. Should the desired comfort level require air conditioning, the system will automatically make the adjustment. 72°F (22°C) is the recommended setting for maximum comfort for the average person; however, this may vary.
UNDERSTANDING YOUR INSTRUMENT PANEL 279 • If your air conditioning performance seems lower than expected, check the front of the A/C condenser located in front of the radiator for an accumulation of dirt or insects. Clean with a gentle water spray from behind the radiator and through the condenser. Fabric front fascia protectors may reduce airflow to the condenser, reducing air conditioning performance.
280 UNDERSTANDING YOUR INSTRUMENT PANEL
UNDERSTANDING YOUR INSTRUMENT PANEL 281 The operator can override the AUTO mode setting to • Floor change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets. • Panel Air is directed through the outlets in the instrument • Mix Air is directed through the floor, defrost, and side panel. These outlets can be adjusted to direct airflow.
282 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioner Control Press this button to turn on the air conditioning during manual operation only. When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the Mode control dial. Press this button a second time to turn OFF the air conditioning. An LED in the button illuminates when manual compressor operation is selected. • Recirculation Control The system will automatically control recirculation.
UNDERSTANDING YOUR INSTRUMENT PANEL 283 • Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation button. However, under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents. When these conditions are present, and the Recirculation button is pressed, the indicator will flash and then turn off. This tells you that you are unable to go into Recirculation Mode at this time.
284 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Mix mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem, increase blower speed. Vehicle windows tend to fog on the inside in mild but rainy or humid weather.
UNDERSTANDING YOUR INSTRUMENT PANEL 285 Control Setting Suggestions for Various Weather Conditions 4
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 292 䡵 Automatic Transmission . . . . . . . . . . . . . . . . . 295 ▫ Automatic Transmission . . . . . . . . . . . . . . . 292 ▫ Automatic Transmission Ignition Interlock Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . 292 ▫ Extreme Cold Weather (Below –20°F Or ⫺29°C) . . . . . . . . . . . . . . . 293 ▫ If Engine Fails To Start . . . .
288 STARTING AND OPERATING ▫ Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . 306 䡵 Anti-Lock Brake System (ABS) . . . . . . . . . . . . 322 䡵 AutoStick威 — If Equipped . . . . . . . . . . . . . . . 313 䡵 Electronic Brake Control System . . . . . . . . . . . 324 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . 313 ▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . 325 ▫ General Information . . . . . . . . . . . . . . . . . . 314 ▫ Traction Control System (TCS) . . . . . . .
STARTING AND OPERATING 289 䡵 Tires — General Information . . . . . . . . . . . . . 339 䡵 Tire Chains . . . . . . . . . . . . . . . . . . . . . . . . . . 348 ▫ Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . 339 䡵 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 349 ▫ Tire Inflation Pressures . . . . . . . . . . . . . . . . 340 䡵 Tire Rotation Recommendations . . . . . . . . . . . 349 ▫ Radial-Ply Tires . . . . . . . . . . . . . . . . . . . . .
290 STARTING AND OPERATING ▫ Fuel System Cautions . . . . . . . . . . . . . . . . . 363 䡵 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 368 ▫ Carbon Monoxide Warnings . . . . . . . . . . . . 364 ▫ Fuel Filler Cap (Gas Cap) . . . . . . . . . . . . . . 368 䡵 Flexible Fuel (3.6L Engine Only) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 364 ▫ Loose Filler Cap Message . . . . . . . . . . . . . . 370 ▫ E-85 General Information . . . . . . . . . . . . . . .
STARTING AND OPERATING 291 ▫ Trailer Towing Weights 䡵 Recreational Towing (Maximum Trailer Weight Ratings) . . . . . . . . 376 (Behind Motorhome, Etc.) . . . . . . . . . . . . . . . . 383 ▫ Trailer And Tongue Weight . . . . . . . . . . . . . 377 ▫ Towing Requirements . . . . . . . . . . . . . . . . . 378 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . 382 ▫ Towing This Vehicle Behind Another Vehicle . . . . . . . . . . . . . . . . 383 ▫ Recreational Towing – All Models . . . . . . . .
292 STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
STARTING AND OPERATING 293 For vehicles equipped with Tip Start (Six-Speed Trans- If Engine Fails To Start mission), turn the ignition switch to the START position WARNING! and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage auto• Never pour fuel or other flammable liquids into matically when the engine is running.
294 STARTING AND OPERATING Without Tip Start If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather” procedures, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine. This should clear any excess fuel in case the engine is flooded.
STARTING AND OPERATING 295 CAUTION! The engine block heater must be plugged in at least one hour to have an adequate warning effect on the engine. To prevent damage to the starter, wait 10 to 15 seconds before trying again. WARNING! After Starting The idle speed will automatically decrease as the engine warms up. Remember to disconnect the engine block heater cord before driving. Damage to the 110-115 Volt electrical cord could cause electrocution.
296 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift between PARK, REVERSE, NEUTRAL, or DRIVE when the engine is above idle speed. • Before shifting into any gear, make sure your foot is firmly pressing on the brake pedal. • It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed.
STARTING AND OPERATING 297 WARNING! (Continued) • Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the ignition key. Once the key is removed, the shift lever is locked in the PARK position, securing the vehicle against unwanted movement.
298 STARTING AND OPERATING be turned to the ON/RUN or START position (engine vehicle is stopped. Be sure to keep your foot on the brake pedal when moving the shift lever between these gears. running or not) and the brake pedal must be pressed. Four-Speed Automatic Transmission — If Equipped The shift lever position display (located in the instrument panel cluster) indicates the transmission gear range.
STARTING AND OPERATING 299 move the shift lever out of PARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. WARNING! • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • Your vehicle could move and injure you and others if it is not completely in PARK.
300 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the ignition key. Once the key is removed, the shift lever is locked in the PARK position, securing the vehicle against unwanted movement.
STARTING AND OPERATING 301 CAUTION! • Before moving the shift lever out of PARK, you must turn the ignition switch from the LOCK/OFF position to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain. • Look at the shift lever position display and verify that it indicates the PARK position.
302 STARTING AND OPERATING WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can result in severe transmission damage.
STARTING AND OPERATING 303 During cold temperatures, transmission operation may be modified depending on engine and transmission temperature as well as vehicle speed. This feature improves warm up time of the engine and transmission to achieve maximum efficiency. Engagement of the torque converter clutch is inhibited until the transmission fluid is warm (refer to the “Note” under “Torque Converter Clutch” in this section).
304 STARTING AND OPERATING In the event of a momentary problem, the transmission If the transmission cannot be reset, dealer service is can be reset to regain all forward gears by performing the required. following steps: Overdrive Operation The automatic transmission includes an electronically 1. Stop the vehicle. controlled Overdrive (fourth gear). The transmission will 2. Shift the transmission into PARK. automatically shift into the Overdrive gear if the follow3.
STARTING AND OPERATING 305 Torque Converter Clutch A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automatically at calibrated speeds. This may result in a slightly different feeling or response during normal operation in the upper gears. When the vehicle speed drops or during some accelerations, the clutch automatically disengages.
306 STARTING AND OPERATING Shifting from DRIVE to PARK or REVERSE should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when moving the shift lever between these gears. The transmission shift lever has PARK, REVERSE, NEUTRAL, DRIVE, and AutoStick威 shift positions. Manual shifts can be made using the AutoStick威 shift control (refer to “AutoStick威” in “Starting And Operating” for further information).
STARTING AND OPERATING 307 PARK This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while vehicle is in motion. Apply the parking brake when leaving vehicle in this range. When parking on a level surface, you may place the shift lever in the PARK position first, and then apply the parking brake.
308 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and your foot is firmly pressing the brake pedal.
STARTING AND OPERATING 309 WARNING! (Continued) CAUTION! • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever.
310 STARTING AND OPERATING • With brake pedal released, verify that the shift lever will not move out of PARK. WARNING! REVERSE This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop. Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision.
STARTING AND OPERATING 311 During cold temperatures, transmission operation may be modified depending on engine and transmission temperature as well as vehicle speed. This feature improves warm up time of the engine and transmission to achieve maximum efficiency. Engagement of the torque converter clutch is inhibited until the transmission fluid is warm (refer to the “Note” under “Torque Converter Clutch” in this section).
312 STARTING AND OPERATING PARK, REVERSE, and NEUTRAL will continue to operate. The Malfunction Indicator Light (MIL) may be illuminated. Limp Home Mode allows the vehicle to be driven to an authorized dealer for service without damaging the transmission. NOTE: Even if the transmission can be reset, we recommend that you visit an authorized dealer at your earliest possible convenience. Your authorized dealer has diagnostic equipment to determine if the problem could recur.
STARTING AND OPERATING 313 • vehicle speed is sufficiently high, and • the driver is not heavily pressing the accelerator. Torque Converter Clutch A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automatically at calibrated speeds. This may result in a slightly different feeling or response during normal operation in the upper gears.
314 STARTING AND OPERATING NOTE: In AutoStick威 mode, the transmission will only • Avoid using speed control when AutoStick威 is enshift up or down when the driver moves the shift lever to gaged. the right (+) or left (-), or as described below. • The transmission will automatically shift up when maximum engine speed is reached while AutoStick威 is AutoStick威 is deactivated when the shift lever is shifted engaged. from the AutoStick (+/-) position into the DRIVE position.
STARTING AND OPERATING 315 DRIVING ON SLIPPERY SURFACES Acceleration Rapid acceleration on snow covered, wet, or other slippery surfaces may cause the driving wheels to pull erratically to the right or left. This phenomenon occurs when there is a difference in the surface traction under the front (driving) wheels. WARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. You could lose control of the vehicle and possibly have a collision.
316 STARTING AND OPERATING DRIVING THROUGH WATER Driving through water more than a few inches/ centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. Flowing/Rising Water WARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water. Furthermore, flowing and/or rising water can carry your vehicle away swiftly.
STARTING AND OPERATING 317 CAUTION! (Continued) WARNING! • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water. Do not continue to operate the vehicle if any fluid appears contaminated, as this may result in further damage.
318 STARTING AND OPERATING POWER STEERING • Upon initial start-up in cold weather, the power steerThe standard power steering system will give you good ing pump may make noise for a short amount of time. vehicle response and increased ease of maneuverability This is due to the cold, thick fluid in the steering in tight spaces. The system will provide mechanical system. This noise should be considered normal, and it steering capability if power assist is lost. does not in any way damage the steering system.
STARTING AND OPERATING 319 Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as anticipated. Coordinate inspection efforts through an authorized dealer. CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components.
320 STARTING AND OPERATING PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied. Also, be certain to leave the transmission in PARK. The parking brake lever is located in the center console. To apply the parking brake, pull the lever up as firmly as possible. To release the parking brake, pull the lever up slightly, press the center button, then lower the lever completely.
STARTING AND OPERATING 321 When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. Apply the parking brake before placing the shift lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK. The parking brake should always be applied whenever the driver is not in the vehicle.
322 STARTING AND OPERATING CAUTION! If the “Brake Warning Light” remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately. ANTI-LOCK BRAKE SYSTEM (ABS) The Anti-Lock Brake System (ABS) provides increased vehicle stability and brake performance under most braking conditions.
STARTING AND OPERATING 323 The “Anti-Lock Brake Warning Light” monitors the Anti-Lock Brake System. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If both the “Brake Warning Light” and the “Anti-Lock Brake Warning Light” remain on, the Anti-Lock Brake (ABS) and Electronic Brake Force Distribution (EBD) Systems are not functioning. Immediate repair to the ABS system is required. See your authorized dealer.
324 STARTING AND OPERATING You also may experience the following when the brake system goes into anti-lock: • The ABS motor running (it may continue to run for a short time after the stop), • the clicking sound of solenoid valves, • brake pedal pulsations, • and a slight drop or fall away of the brake pedal at the end of the stop. These are all normal characteristics of ABS.
STARTING AND OPERATING 325 vehicle stability and control in various driving conditions brake of the spinning wheel. This will allow more engine torque to be applied to the wheel that is not spinning. and are commonly referred to as ESC. This feature remains active even if TCS and ESC are in Anti-Lock Brake System (ABS) the “Partial Off” mode. Refer to “Electronic Stability This system aids the driver in maintaining vehicle control Control (ESC)” in this section of this manual.
326 STARTING AND OPERATING WARNING! • The BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The BAS cannot prevent collisions, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning.
STARTING AND OPERATING 327 WARNING! Electronic Stability Control (ESC) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESC cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. ESC also cannot prevent accidents resulting from loss of vehicle control due to inappropriate driver input for the conditions.
328 STARTING AND OPERATING reduction. This mode is intended to be used if the vehicle To turn ESC on again, momentarily press the “ESC Off” is in deep snow, sand, or gravel conditions and more switch. This will restore the normal “ESC On” mode of wheel spin than ESC would normally allow is required to operation. gain traction. WARNING! In partial ESC mode, the engine power reduction feature of ESC is disabled. Therefore, enhanced vehicle stability offered by the ESC system is reduced.
STARTING AND OPERATING 329 ESC Activation/Malfunction Indicator Light And ESC OFF Indicator Light The “ESC Activation/Malfunction Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON position. It should go out with the engine running. If the “ESC Activation/Malfunction Indicator Light” comes on continuously with the engine running, a malfunction has been detected in the ESC system.
330 STARTING AND OPERATING TIRE SAFETY INFORMATION Tire Markings NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter ⬙P⬙ is absent from this tire size designation.
STARTING AND OPERATING 331 compact spare tires have the letter “T” or “S” molded • High flotation tire sizing is based on U.S. design into the sidewall preceding the size designation. Exstandards and it begins with the tire diameter molded ample: T145/80D18 103M. into the sidewall. Example: 31x10.5 R15 LT. Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....
332 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
STARTING AND OPERATING 333 Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
334 STARTING AND OPERATING Tire Terminology And Definitions Term B-Pillar Cold Tire Inflation Pressure Maximum Inflation Pressure Recommended Cold Tire Inflation Pressure Tire Placard Definition The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
STARTING AND OPERATING 335 Tire Loading And Tire Pressure Tire And Loading Information Placard Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
336 STARTING AND OPERATING This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear, and spare tires. axles must not be exceeded. For further information on GAWRs, vehicle loading, and trailer towing, refer to “Vehicle Loading” in this section.
STARTING AND OPERATING 337 3. Subtract the combined weight of the driver and pas- 6. If your vehicle will be towing a trailer, load from your sengers from XXX lbs or XXX kg. trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available 4. The resulting figure equals the available amount of cargo and luggage load capacity of your vehicle. cargo and luggage load capacity.
338 STARTING AND OPERATING
STARTING AND OPERATING 339 WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
340 STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Tire Inflation Pressures The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or rear edge of the driver’s side door.
STARTING AND OPERATING 341 CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter.
342 STARTING AND OPERATING Tire Pressures For High Speed Operation Radial-Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle important. Increased tire pressure and reduced vehicle poorly.
STARTING AND OPERATING 343 vehicle. If your vehicle has this option refer to an Compact Spare Tire – If Equipped authorized tire dealer for the recommended tire rotation The compact spare is for temporary emergency use only. You can identify if your vehicle is equipped with a pattern.
344 STARTING AND OPERATING WARNING! Compact spares are for temporary emergency use only. With these spares, do not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnings, which apply to your spare. Failure to do so could result in spare tire failure and loss of vehicle control.
STARTING AND OPERATING 345 WARNING! Limited-use spares are for emergency use only. Installation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel. Keep inflated to the cold tire inflation pressure listed on your Tire and Loading Information Placard located on the driver’s side door opening. Replace (or repair) the original equipment tire at the first opportunity and reinstall it on your vehicle.
346 STARTING AND OPERATING Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced.
STARTING AND OPERATING 347 Keep dismounted tires in a cool, dry place with as little It is recommended to replace the two front tires or two exposure to light as possible. Protect tires from contact rear tires as a pair. Replacing just one tire can seriously affect your vehicle’s handling. If you ever replace a with oil, grease, and gasoline. wheel, make sure that the wheel’s specifications match Replacement Tires those of the original wheels.
348 STARTING AND OPERATING WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death.
STARTING AND OPERATING 349 poorer than that of non-studded tires. Some states proSNOW TIRES Some areas of the country require the use of snow tires hibit studded tires; therefore, local laws should be during the winter. All season tires can be identified by the checked before using these tire types. M+S designation on the tire sidewall.
350 STARTING AND OPERATING The suggested rotation method is the “rearward cross” shown in the following diagram. This rotation pattern does not apply to some directional tires that must not be reversed. Tire Rotation TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. The tire pressure will vary with temperature by about 1 psi (7 kPa) for every 12°F (6.5°C).
STARTING AND OPERATING 351 The TPM System will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire. The TPM System will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above the recommended cold placard pressure.
352 STARTING AND OPERATING CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
STARTING AND OPERATING 353 • Seasonal temperature changes will affect tire pressure, Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will and the TPMS will monitor the actual tire pressure in illuminate in the instrument cluster, a ⬙LOW TIRE⬙ the tire.
354 STARTING AND OPERATING sound a chime. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. The “Tire Pressure Monitoring Telltale Light” will turn off when the fault condition no longer exists. A system fault can occur due to any of the following: NOTE: 1. The compact spare tire (if equipped) does not have a tire pressure monitoring sensor. Therefore, the TPMS will not monitor the pressure in the compact spare tire. 5.
STARTING AND OPERATING 355 5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically and the “Tire Pressure Monitoring Telltale Light” will turn OFF, as long no tire pressure is below the low-pressure warning limit in any of the four active road tires. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this information.
356 STARTING AND OPERATING Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will illuminate in the instrument cluster and a chime will sound when tire pressure is low in one or more of the four active road tires. In addition, the Electronic Vehicle Information Center (EVIC) will display a graphic showing the pressure values of each tire with the low tire pressure values flashing.
STARTING AND OPERATING 357 Should this occur, you should stop as soon as possible, display dashes (- -) in place of the pressure value to and inflate all tires with low pressure (those flashing in indicate which sensor is not being received. the EVIC graphic) to the vehicle’s recommended cold placard pressure value.
358 STARTING AND OPERATING The EVIC will also display a ⬙CHECK TPM SYSTEM⬙ message for a minimum of five seconds when a system fault related to an incorrect sensor location fault is detected. In this case, the ⬙CHECK TPM SYSTEM⬙ message is then followed with a graphic display with pressure values still shown. This indicates that the pressure values are still being received from the TPM sensors but they may not be located in the correct vehicle position. 1.
STARTING AND OPERATING 359 Monitoring Telltale Light” will remain ON, a chime will the TPMS will update automatically. In addition, the sound, and the EVIC will still display a flashing pressure “Tire Pressure Monitoring Telltale Light” will turn OFF and the graphic in the EVIC will display a new pressure value in the graphic display. value instead of dashes (- -), as long no tire pressure is 3.
360 STARTING AND OPERATING The tire pressure sensors are covered under one of the as hard starting, stalling, and hesitations. If you experifollowing licenses: ence these symptoms, try another brand of gasoline before considering service for the vehicle. United States . . . . . . . . . . . . . . . . . . . KR5S18002015B Over 40 auto manufacturers worldwide have issued and Canada. . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 361 The manufacturer supports the use of reformulated gasoline. Properly blended reformulated gasoline will provide excellent performance and durability of engine and fuel system components. Problems that result from using gasoline containing Methanol or gasoline containing more than 10% Ethanol are not the responsibility of the manufacturer and may not be covered under warranty. Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as Ethanol.
362 STARTING AND OPERATING To fix a Non-FFV vehicle inadvertently fueled once with therefore, you should ask your gasoline retailer whether the gasoline contains MMT. It is even more important to E-85 perform the following: look for gasoline without MMT in Canada, because MMT • change the engine oil and oil filter can be used at levels higher than those allowed in the United States. MMT is prohibited in Federal and Califor• disconnect and reconnect the battery nia reformulated gasoline.
STARTING AND OPERATING 363 Fuel System Cautions CAUTION! (Continued) CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system. • An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat.
364 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
STARTING AND OPERATING 365 the other sections of this manual for information on features that are common between Flexible Fuel and gasoline-only powered vehicles. CAUTION! Only vehicles with the E-85 fuel filler door label can operate on E-85. Ethanol Fuel (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. WARNING! E-85 Fuel Cap Ethanol vapors are extremely flammable and could cause serious personal injury.
366 STARTING AND OPERATING NOTE: Fuel Requirements Your vehicle will operate on both unleaded gasoline with • When the ambient temperature is above 90° F (32° C), an octane rating of 87, or E-85 fuel, or any mixture of you may experience hard starting and rough idle these two. For best results, a refueling pattern that following start up even if the above recommendations alternates between E-85 and unleaded gasoline should be are followed. avoided.
STARTING AND OPERATING 367 requirements of Material Standard MS-6395. MS-6395 contains additional requirements, developed during extensive fleet testing, to provide additional protection to Chrysler Group LLC engines. Use MOPAR威 or an equivalent oil meeting the specification MS-6395. Starting The characteristics of E-85 fuel make it unsuitable for use when ambient temperatures fall below 0°F (-18°C).
368 STARTING AND OPERATING Maintenance CAUTION! Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect driveability. ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door, on the left rear quarter panel of the vehicle. If the gas cap is lost or Fuel Filler Door damaged, be sure the replacement cap is for use with this After removing the gas cap, place the gas cap tether cable vehicle.
STARTING AND OPERATING 369 CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap may cause the “Malfunction Indicator Light (MIL)” to turn on. • To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. When the fuel nozzle “clicks” or shuts off, the fuel tank is full.
370 STARTING AND OPERATING Loose Filler Cap Message If the vehicles diagnostic system determines that the fuel • Never add fuel when the engine is running. This is filler cap in loose, improperly installed, or damaged, a in violation of most state and federal fire regula- “gASCAP” message will be displayed in the instrument tions and doing so may cause the MIL to turn on. cluster. Tighten the gas cap until a “clicking” sound is • A fire may result if gasoline is pumped into a heard.
STARTING AND OPERATING 371 The label contains the following information: • Name of manufacturer • Month and year of manufacture • Gross Vehicle Weight Rating (GVWR) • Gross Axle Weight Rating (GAWR) front • Gross Axle Weight Rating (GAWR) rear • Vehicle Identification Number (VIN) • Type of Vehicle • Month Day and Hour of Manufacture (MDH) The bar code allows a computer scanner to read the Vehicle Identification Number (VIN).
372 STARTING AND OPERATING Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front and rear GAWR. The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation. Weigh it on a commercial scale to insure that it is not over the GVWR. Figure out the weight on the front and rear of the vehicle separately.
STARTING AND OPERATING 373 TRAILER TOWING In this section, you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer, carefully review this information to tow your load as efficiently and safely as possible.
374 STARTING AND OPERATING Gross Combination Weight Rating (GCWR) The GCWR is the total permissible weight of your vehicle and trailer when weighed in combination. NOTE: The GCWR rating includes a 150 lbs (68 kg) allowance for the presence of a driver. Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR.
STARTING AND OPERATING 375 Weight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the truck. These kinds of hitches are the most popular on the market today and they are commonly used to tow small- and mediumsized trailers. Trailer Hitch Classification Definitions Class Max.
376 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Maximum Trailer Weight Ratings Engine/Transmission Max. Frontal Area Max. GTW (Gross Trailer Wt.) Max. Trailer Tongue Wt. (See Note 1) 100 lbs (45 kg) 200 lbs (90 kg) 2.4L/Auto See Note 2 1,000 lbs (450 kg) 3.6L/Auto 22 sq.ft. (2.0 sq.m) 2,000 lbs (900 kg) Refer to local laws for maximum trailer towing speeds.
STARTING AND OPERATING 377 CAUTION! Towing a trailer with a larger than recommended frontal area could cause the engine to overheat or cause severe engine damage under extreme conditions. Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
378 STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to “Tire Safety Information/Tire and Loading Information Placard” in “Starting and Operating” for the maximum combined weight of occupants and cargo for your vehicle.
STARTING AND OPERATING 379 WARNING! WARNING! (Continued) Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and that it will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have a collision.
380 STARTING AND OPERATING WARNING! (Continued) 3. GAWR 4. Trailer tongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve 10% of trailer tongue weight as a percentage of total trailer weight). • Check for signs of tire wear or visible tire damage before towing a trailer. Refer to “Tires – General Information” in “Starting and Operating” for information on tread wear indicators and for proper inspection procedure.
STARTING AND OPERATING 381 • An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. • Trailer brakes are recommended for trailers over 1,000 lbs (450 kg) and required for trailers in excess of 2,000 lbs (907 kg).
382 STARTING AND OPERATING If you REGULARLY TOW a trailer for more than 45 minutes of continuous operation, then change the automatic transmission fluid and filter according to the interval specified for “police, taxi, fleet, or frequent trailer towing.” Refer to the “Maintenance Schedule” for the proper Make sure all trailer and vehicle lights are working maintenance intervals. properly — including hazard flashers.
STARTING AND OPERATING 383 Electronic Speed Control – If Equipped • Do not use in hilly terrain or with heavy loads. Cooling System To reduce potential for engine and transmission overheating, take the following actions: • When using the speed control, if you experience speed • City Driving drops greater than 10 mph (16 km/h), disengage until When stopped for short periods of time, shift the transyou can get back to cruising speed. mission into NEUTRAL and increase engine idle speed.
384 STARTING AND OPERATING Recreational Towing – All Models Recreational towing is allowed ONLY if the front wheels are OFF the ground. This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly, follow this procedure: 1. Properly secure the dolly to the tow vehicle, following the dolly manufacturer’s instructions. 2. Drive the front wheels onto the tow dolly. 3. Firmly apply the parking brake. Place the transmission in PARK. 4.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flashers . . . . . . . . . . . . . . . . 386 䡵 Jump-Starting . . . . . . . . . . . . . . . . . . . . . . . . 398 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 386 ▫ Preparations For Jump-Start . . . . . . . . . . . . . 398 ▫ Engine Oil Overheating (2.4L Engine Only) — If Equipped . . . . . . . . . . . . . . . . . . . . . . 387 ▫ Jump-Starting Procedure . . . . . . . . . . . . . . . 400 䡵 Jacking And Tire Changing . . . . . . . . . . . . .
386 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all directional • On the highways — Slow down.
WHAT TO DO IN EMERGENCIES 387 NOTE: There are steps that you can take to slow down Engine Oil Overheating (2.4L Engine Only) — If an impending overheat condition: Equipped During sustained high-speed driving or trailer tow up • If your air conditioner (A/C) is on, turn it off. The A/C long grades on a hot day, the engine oil temperature may system adds heat to the engine cooling system and become too hot. If this happens, the “HOTOIL” message turning the A/C off can help remove this heat.
388 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! (Continued) WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack.
WHAT TO DO IN EMERGENCIES 389 Spare Tire Removal Lift up the load floor cover and remove the hold down. Preparations For Jacking 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2. Turn on the Hazard Warning flashers. 3. Set the parking brake. Spare Tire and Jack Stowage 4.
390 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle while the vehicle is being jacked.
WHAT TO DO IN EMERGENCIES 391 WARNING! (Continued) • Only use the jack in the positions indicated and for lifting this vehicle during a tire change. • If working on or near a roadway, be extremely careful of motor traffic. • To assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground. CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle.
392 WHAT TO DO IN EMERGENCIES NOTE: The jack handle attaches to the side of the jack with two attachment points. When the jack is partially expanded, the tension between the two attachment points holds the jack handle in place. CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 3. Removing Jack Handle From Jack 2. Loosen, but do not remove, the wheel nuts by turning them to the left one turn while the wheel is still on the ground.
WHAT TO DO IN EMERGENCIES 393 3. There is a front and rear jacking location on each side of the vehicle. 6 Rear Jacking Location Front Jacking Location 4. Turn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the wheel to be changed. Do not raise the vehicle until you are sure the jack is securely engaged.
394 WHAT TO DO IN EMERGENCIES WARNING! CAUTION! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly. 5. Raise the vehicle by turning the jack screw to the right, using the swivel wrench.
WHAT TO DO IN EMERGENCIES 395 WARNING! • To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. • To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges. 7. Lower the vehicle by turning the jack screw to the left. 8. Finish tightening the nuts. Push down on the wrench while at the end of the handle for increased leverage.
396 WHAT TO DO IN EMERGENCIES Road Tire Installation Vehicles Equipped With Wheel Covers 1. Mount the road tire on the axle. 2. To ease the installation process for steel wheels with wheel covers, install two lug nuts on the mounting studs which are on each side of the valve stem. Install the lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts.
WHAT TO DO IN EMERGENCIES 397 4. Install the remaining lug nuts with the cone shaped correct tightness, have them checked with a torque end of the nut toward the wheel. Lightly tighten the lug wrench by your authorized dealer or service station. nuts. 7. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure that all lug nuts are properly WARNING! seated against the wheel.
398 WHAT TO DO IN EMERGENCIES 3. Lower the vehicle to the ground by turning the jack NOTE: When using a portable battery booster pack follow the manufacturer’s operating instructions and handle counterclockwise. precautions. 4. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased CAUTION! leverage. Tighten the lug nuts in a star pattern until each nut has been tightened twice.
WHAT TO DO IN EMERGENCIES 399 shield. To allow jump-starting there are remote battery posts located on the left side of the engine compartment. WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured.
400 WHAT TO DO IN EMERGENCIES 3. Remove the protective cover over the remote positive (+) battery post. To remove the cover, press the locking tab and pull upward on the cover. WARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure WARNING! Failure to follow this procedure could result in personal injury or property damage due to battery explosion. CAUTION! Locking Tab 4.
WHAT TO DO IN EMERGENCIES 401 1. Connect the positive (+) end of the jumper cable to the 5. Start the engine in the vehicle that has the booster remote positive (+) post of the discharged vehicle. battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery. 2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post of the booster battery. Once the engine is started, remove the jumper cables in the reverse sequence: 3.
402 WHAT TO DO IN EMERGENCIES 10. Reinstall the protective cover over the remote posi- front wheels. Then shift back and forth between DRIVE tive (+) battery post of the discharged vehicle. and REVERSE. Using minimal accelerator pedal pressure to maintain the rocking motion, without spinning the If frequent jump-starting is required to start your vehicle wheels, is most effective. you should have the battery and charging system inspected at your authorized dealer.
WHAT TO DO IN EMERGENCIES 403 CAUTION! WARNING! • When “rocking” a stuck vehicle by moving between DRIVE and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h) while in gear (no transmission shifting occurring). Fast spinning tires can be dangerous.
404 WHAT TO DO IN EMERGENCIES 3. Turn the ignition switch to the ON/RUN position 6. Move the shift lever into the NEUTRAL position. without starting the engine. 7. The vehicle may then be started in NEUTRAL. 4. Press and maintain firm pressure on the brake pedal. 8. Reinstall the cupholder liner. 5. Insert a screwdriver or similar tool into the hole at the front of the cupholder and push and hold the override release lever forward.
WHAT TO DO IN EMERGENCIES 405 main structural members of the vehicle, not to bumpers or associated brackets. State and local laws applying to vehicles under tow must be observed. If you must use the accessories (wipers, defrosters, etc.) while being towed, the ignition must be in the ON/RUN position, not the ACC position. CAUTION! • Do not use sling type equipment when towing. Damage to the fascia will occur.
406 WHAT TO DO IN EMERGENCIES • The towing distance must not exceed 15 mi (24 km). • The towing speed must not exceed 25 mph (40 km/h). If the transmission is not operable, or the vehicle must be towed faster than 25 mph (40 km/h) or farther than 15 mi (24 km), it must be towed with the front wheels OFF the ground (using a flatbed truck, towing dolly, or wheel lift equipment with the front wheels raised).
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.4L . . . . . . . . . . . . . 409 䡵 Maintenance Procedures . . . . . . . . . . . . . . . . . 414 䡵 Engine Compartment — 3.6L . . . . . . . . . . . . . 410 ▫ Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 415 䡵 Onboard Diagnostic System — OBD II . . . . . . 411 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . 418 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 411 ▫ Engine Air Cleaner Filter . . . . . . . . . .
408 MAINTAINING YOUR VEHICLE ▫ Adding Washer Fluid . . . . . . . . . . . . . . . . . 425 䡵 Replacement Bulbs . . . . . . . . . . . . . . . . . . . . 450 ▫ Exhaust System . . . . . . . . . . . . . . . . . . . . . 425 䡵 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 451 ▫ Cooling System . . . . . . . . . . . . . . . . . . . . . 428 ▫ Headlamp . . . . . . . . . . . . . . . . . . . . . . . . . 451 ▫ Brake System . . . . . . . . . . . . . . . . . . . . . . . 433 ▫ Fog Lamps . . . . . . . . .
MAINTAINING YOUR VEHICLE 409 ENGINE COMPARTMENT — 2.
410 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 3.
MAINTAINING YOUR VEHICLE 411 ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
412 MAINTAINING YOUR VEHICLE persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the “Malfunction Indicator Light (MIL).” Resolving the problem will turn the MIL light off. Normally, the OBD II system will be ready. The OBD II system may not be ready if your vehicle was recently serviced, recently had a dead battery or a battery replacement.
MAINTAINING YOUR VEHICLE 413 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a. The MIL will flash for about 10 seconds and then before going to the I/M station. The I/M station can fail return to being fully illuminated until you turn OFF your vehicle because the MIL is on with the engine the ignition or start the engine.
414 MAINTAINING YOUR VEHICLE DEALER SERVICE Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner. Service Manuals are available which include detailed service information for your vehicle. Refer to these Service Manuals before attempting any procedure yourself. NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you.
MAINTAINING YOUR VEHICLE 415 CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
416 MAINTAINING YOUR VEHICLE CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Also, be sure the oil fill cap is replaced and tightened after adding oil.
MAINTAINING YOUR VEHICLE 417 CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New Vehicle Limited Warranty. Lubricants which do not have both the engine oil certification mark and the correct SAE viscosity grade number should not be used. Engine Oil Viscosity (SAE Grade) – 3.6L Engine SAE 5W-30 engine oil is preferred for all operating temperatures.
418 MAINTAINING YOUR VEHICLE Lubricants which do not have both, the engine oil certi- station, or governmental agency for advice on how and fication mark and the correct SAE viscosity grade num- where used oil and oil filters can be safely discarded in your area. ber should not be used. Synthetic Engine Oils You may use synthetic engine oils provided the recommended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes are followed.
MAINTAINING YOUR VEHICLE 419 Engine Air Cleaner Filter WARNING! The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc.) removed.
420 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery.
MAINTAINING YOUR VEHICLE 421 Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components. Such damage is not covered by the New Vehicle Limited Warranty.
422 MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling R-134a air conditioning refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment. The A/C Air Filter is located in the fresh air inlet behind the glove box.
MAINTAINING YOUR VEHICLE 423 CAUTION! The A/C Air Filter is identified with an arrow to indicate airflow direction through the filter. Failure to install the filter properly will result in the need to replace it more often. 8. Reinstall the glove box door dampener and glove box. A/C Air Filter Replacement 6. Remove the A/C Air Filter by pulling it straight out of the housing. 7. Install the A/C Air Filter with the arrow on the filter pointing toward the floor.
424 MAINTAINING YOUR VEHICLE hood latching components to ensure proper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. The external lock cylinders should be lubricated twice a year, preferably in the Fall and Spring.
MAINTAINING YOUR VEHICLE 425 Adding Washer Fluid The fluid reservoir for the windshield washers is located in the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water. WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you.
426 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, refer to “Safety Tips/Exhaust Gas” in “Things To Know Before Starting Your Vehicle” for further information. • A hot exhaust system can start a fire if you park over materials that can burn.
MAINTAINING YOUR VEHICLE 427 Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter damverter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage. motion.
428 MAINTAINING YOUR VEHICLE Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the LOCK position. The fan is temperature controlled and can start at anytime the ignition switch is in the ON position. • You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool.
MAINTAINING YOUR VEHICLE 429 Selection Of Coolant Use only the manufacturer’s recommended coolant. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. CAUTION! • Mixing of engine coolant (antifreeze) other than specified HOAT engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection.
430 MAINTAINING YOUR VEHICLE Please review these recommendations for using Hybrid Please note that it is the owner’s responsibility to mainOrganic Additive Technology (HOAT) engine coolant tain the proper level of protection against freezing according to the temperatures occurring in the area where (antifreeze). When adding engine coolant (antifreeze): the vehicle is operated.
MAINTAINING YOUR VEHICLE 431 WARNING! rules for your community. To prevent ingestion by animals or children, do not store ethylene glycol based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground. If ingested by a child or pet, seek emergency assistance immediately. Clean up any ground spills immediately. • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution.
432 MAINTAINING YOUR VEHICLE The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for engine coolant (antifreeze) freeze point or replacing coolant. Advise your service attendant of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill.
MAINTAINING YOUR VEHICLE 433 • Make sure that the radiator and coolant recovery bottle overflow hoses are not kinked or obstructed. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean. WARNING! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage.
434 MAINTAINING YOUR VEHICLE Clean the top of the master cylinder area before removing the cap. If necessary, add fluid to bring the fluid level up to the requirements described on the brake fluid reservoir. Overfilling of fluid is not recommended because it may cause leaking in the system. Fluid level can be expected to fall as the brake pads wear. Brake fluid level should be checked when pads are replaced. However, low fluid level may be caused by a leak and a checkup may be needed.
MAINTAINING YOUR VEHICLE 435 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point. This may cause it to boil unexpectedly during hard or prolonged braking, resulting in sudden brake failure. This could result in a collision.
436 MAINTAINING YOUR VEHICLE Parts” in “Maintaining Your Vehicle” for further information. It is important that the transmission fluid be maintained at the prescribed level using the recommended fluid. CAUTION! Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than the manufacturer’s recommended fluid will require more frequent fluid and filter changes.
MAINTAINING YOUR VEHICLE 437 driven at least 15 miles (24 km). Hot fluid cannot be held Fluid Level Check – Four-Speed Automatic comfortably between the fingertips. Cold fluid is at a Transmission Use the following procedure to check the automatic temperature below 80° F (27° C). transmission fluid level properly: 7. Wipe the dipstick clean and reinsert until seated. Then, 1. Park the vehicle on level ground. remove dipstick and note the reading. 2.
438 MAINTAINING YOUR VEHICLE CAUTION! • Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will require more frequent fluid and filter changes. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. • Dirt and water in the transmission can cause serious damage.
MAINTAINING YOUR VEHICLE 439 road surfaces on which the vehicle is operated, extreme Washing hot or cold weather and other extreme conditions will • Wash your vehicle regularly. Always wash your vehave an adverse effect on paint, metal trim, and underhicle in the shade using MOPAR威 Car Wash or equivabody protection. lent, or a mild car wash soap, and rinse the panels completely with clear water.
440 MAINTAINING YOUR VEHICLE CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. • If you detect any stone chips or scratches in the paint, touch them up immediately. The cost of such repairs is considered the responsibility of the owner.
MAINTAINING YOUR VEHICLE 441 Wheel And Wheel Trim Care Cleaning Headlights Your vehicle has plastic headlights that are lighter and • All wheels and wheel trim, especially aluminum and less susceptible to stone breakage than glass headlights. chrome plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed.
442 MAINTAINING YOUR VEHICLE Stain Repel Fabric Cleaning Procedure – If Interior Care Equipped Instrument Panel Cover Stain Repel seats may be cleaned in the following manThe instrument panel cover has a low glare surface, ner: which minimizes reflections in the windshield. Do not • Remove as much of the stain as possible by blotting use protectants or other products, which may cause with a clean, dry towel. undesirable reflections. Use soap and warm water to restore the low glare surface.
MAINTAINING YOUR VEHICLE 443 Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and MOPAR威 Total Clean or equivalent. Care should be taken to avoid soaking your leather upholstery with any liquid.
444 MAINTAINING YOUR VEHICLE 1. Clean with a wet, soft rag. A mild soap solution may Cleaning Center Console Cupholders be used, but do not use high alcohol content or abrasive Removal cleaners. If soap is used, wipe clean with a clean damp Grab the rubber portion of the cupholder and lift rag. upward. 2. Dry with a soft cloth.
MAINTAINING YOUR VEHICLE 445 FUSES Integrated Power Module The Integrated Power Module is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini fuses. A label that identifies each component may be printed on the inside of the cover. Refer to the graphic below for FUSES/TIPM location.
446 MAINTAINING YOUR VEHICLE Cartridge Fuse Mini Fuse 3 — 10 Amp Red 4 — 5 — Cavity 6 — 7 — 8 — 10 Amp Red 20 Amp Yellow 10 Amp Red 30 Amp Green 30 Amp Green Description Center High Mounted Stop Light (CHMSL)/Brake Switch Ignition Switch Trailer Tow – If Equipped Power Mirror Switch/Climate Controls Ignition Off Draw (IOD) Sense 1 Ignition Off Draw (IOD) Sense 2 Cavity Cartridge Fuse Mini Fuse 9 40 Amp Green 10 — 20 Amp Yellow 11 — 15 Amp Lt Blue 12 — 13 — 14 — 20 Amp Yel
MAINTAINING YOUR VEHICLE 447 Cavity 15 16 Cartridge Fuse 40 Amp Green — Mini Fuse — 15 Amp Lt. Blue 17 — 10 Amp Red 18 40 Amp Green — 19 — 20 — 21 — 20 Amp Yellow 15 Amp Lt. Blue 10 Amp Red Description Cartridge Fuse Mini Fuse 22 — 10 Amp Red 23 — 24 — 25 — 10 Amp Red 26 — 15 Amp Lt.
448 MAINTAINING YOUR VEHICLE Cavity 27 28 Cartridge Fuse — — Mini Fuse 10 Amp Red 10 Amp Red 29 — — 30 — 20 Amp Yellow 31 — — Description Ignition Run – Occupant Classification Module (OCM)/ Occupant Restraint Controller (ORC) Ignition Run — Occupant Classification Module (OCM)/ Occupant Restraint Controller (ORC) Hot Car (No Fuse Required) Ignition Run – Heated Seats – If Equipped Spare Cavity 32 Cartridge Fuse 30 Amp Pink Mini Fuse — 33 — 10 Amp Red 34 30 Amp Pink — Description
MAINTAINING YOUR VEHICLE 449 Cavity Cartridge Fuse Mini Fuse 35 40 Amp Green — 36 30 Amp Pink — 37 — 25 Amp Natural Description Anti-Lock Brakes (ABS) Module – If Equipped/Electronic Stability Control (ESC) Module – If Equipped Passenger Door Module (PDM)/Driver Door Module (DDM) Power Top Module – If Equipped CAUTION! • When installing the Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched.
450 MAINTAINING YOUR VEHICLE VEHICLE STORAGE REPLACEMENT BULBS If you will not be using your vehicle for more than All the inside bulbs are brass or glass wedge base. 21 days, you may want to take steps to preserve your Aluminum base bulbs are not approved and should not battery. be used for replacement. • Disengage the mini-fuse in the Power Distribution LIGHT BULBS – Interior Bulb No. Center labeled IOD (Ignition Off-Draw). Front Courtesy/Reading Lamp . . . . . . . . . .
MAINTAINING YOUR VEHICLE 451 LIGHT BULBS – Exterior Bulb No. Low Beam Headlamp. . . . . . . . . . . . . . . . . . . . . 9006 High Beam Headlamp . . . . . . . . . . . . . . . . . . . . 9005 Front Park/Turn Signal Lamp . . . . . . . . . . . . . . 3457A Front Fog Lamp . . . . . . . . . . . . . . . . . . . . . . . . . H11 Front Side Marker Lamp . . . . . . . . . . . . . . . . . WY5W Center High Mounted Stop (CHMSL) Lamp . . . . . . . . . . . . . . . . . . . . . . . . .
452 MAINTAINING YOUR VEHICLE 3. Rotate bulb and connector 1⁄4 turn and pull outward 4. Pull the bulb out of the socket and replace the bulb. from assembly. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. 5. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 6. Reinsert the bulb and socket assembly and rotate clockwise 1⁄4 turn to secure.
MAINTAINING YOUR VEHICLE 453 Fog Lamps Backup Lamps 1. Access to the lamps through the lower fascia cutout is 1. Open the trunk and gently pull back the trunk liner limited. behind the tail lamp. 2. Turn the steering wheel to allow access and remove 2. Remove the two plastic wing nuts from the tail lamp the inner fender shield. housing. 3. Rotate the bulb and connector 1⁄4 turn counterclockwise. 4. Pull the bulb off of connector and replace with a new one.
454 MAINTAINING YOUR VEHICLE 3. Grasp the tail lamp and pull firmly outward pushing 4. Twist and remove socket from lamp. gently on the studs from inside to disengage the lamp 5. Remove bulb from socket and replace. housing. License Plate Lamp 1. Remove two retaining screws holding the light lens in place. 2. Gently pry the lamp assembly loose. 3. Pull bulb from socket, replace and reattach the lamp assembly with the two retaining screws.
MAINTAINING YOUR VEHICLE 455 FLUID CAPACITIES U.S. Fuel (Approximate) All Engines — (Except 2.4L PZEV) 16.9 Gallons 2.4L PZEV (Partial Zero Emissions Vehicle) 18.5 Gallons Engine Oil with Filter 2.4L Engine (SAE 5W-20, API Certified) 4.5 Quarts 3.6L Engine (SAE 5W-30, API Certified) 6 Quarts Cooling System* 2.4L Engine (MOPAR威 Antifreeze/Coolant 5 7.7 Quarts Year/100,000 Mile Formula or equivalent) 3.6L Engine (MOPAR威 Antifreeze/Coolant 5 11.
456 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil – 2.4L Engine Engine Oil – 3.6L Engine Fluid, Lubricant, or Genuine Part MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade.
MAINTAINING YOUR VEHICLE 457 Chassis Component Automatic Transmission – Four-Speed Automatic Transmission – Six-Speed (62TE) Brake Master Cylinder Power Steering Reservoir Fluid, Lubricant, or Genuine Part MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. MOPAR威 DOT 3 and SAE J1703 should be used. If DOT 3 brake fluid is not available, then DOT 4 is acceptable.
MAINTENANCE SCHEDULES CONTENTS 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . 460 ▫ Required Maintenance Intervals . . . . . . . . . .
M A I N T E N A N C E 460 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent maintenance may be needed for vehicles in severe operating conditions, such as dusty areas and very short trip driving. Inspection and service should also be done S anytime a malfunction is suspected.
MAINTENANCE SCHEDULES 461 M Your authorized dealer will reset the oil change indicator At Each Stop For Fuel message after completing the scheduled oil change. If a • Check the engine oil level about five minutes after a scheduled oil change is performed by someone other fully warmed engine is shut off.
M A I N T E N A N C E 462 MAINTENANCE SCHEDULES Once A Month • Check tire pressure and look for unusual wear or • Change the engine oil filter. damage. • Inspect the brake hoses and lines. • Inspect the battery and clean and tighten the terminals CAUTION! as required. • Check the fluid levels of coolant reservoir, brake master cylinder, and transmission and add as needed. S C H • Check all lights and other electrical items for correct E operation.
MAINTENANCE SCHEDULES 463 M 8,000 Miles (13,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 8,000 miles (13 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 16,000 Miles (26,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
M 464 MAINTENANCE SCHEDULES A I 24,000 Miles (39,000 km) or N T 18 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 24,000 miles (39 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system.
MAINTENANCE SCHEDULES 465 M 40,000 Miles (65,000 km) or 30 Months Maintenance Service Schedule 48,000 Miles (78,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 40,000 miles (65 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code ❏ Change the engine oil and engine oil filter.
M 466 MAINTENANCE SCHEDULES A I 56,000 Miles (91,000 km) or N T 42 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 56,000 miles (91 000 km). S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 64,000 Miles (104,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
MAINTENANCE SCHEDULES 467 M 72,000 Miles (117,000 km) or 54 Months Maintenance Service Schedule 80,000 Miles (130,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 72,000 miles (117 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system.
M 468 MAINTENANCE SCHEDULES A I 88,000 Miles (143,000 km) or N T 66 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 88,000 miles (143 000 km). S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
MAINTENANCE SCHEDULES 469 M 104,000 Miles (169,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 104,000 miles (169 000 km). ❏ Replace the spark plugs (2.4L PZEV Engine Only). ❏ Flush and replace the engine coolant at 104,000 miles (169 000 km) or 60 months whichever comes first.
M 470 MAINTENANCE SCHEDULES A I 120,000 Miles (195,000 km) or N T 90 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 120,000 miles (195 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system. ❏ Change the automatic transmission fluid and filter(s). ❏ Replace the accessory drive belt(s).
MAINTENANCE SCHEDULES 471 M 136,000 Miles (221,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 136,000 miles (221 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 144,000 Miles (234,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
M 472 MAINTENANCE SCHEDULES A I 152,000 Miles (247,000 km) or N T 114 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 152,000 miles (247 000 km).
MAINTENANCE SCHEDULES 473 M WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . 479 ▫ Prepare For The Appointment . . . . . . . . . . . 477 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . 479 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 477 䡵 Warranty Information . . . . . . . . . . . . . . . . . .
476 IF YOU NEED CONSUMER ASSISTANCE 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 483 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 483 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . 483 ▫ Temperature Grades . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 477 the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the for an appointment. right papers with you. Take your warranty folder. All work to be performed may not be covered by the IF YOU NEED ASSISTANCE warranty.
478 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 Auburn Hills, MI 48321–8004 solved with this process. Phone: (800) 423–6343 • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- Chrysler Canada Inc. Customer Center P.O. Box 1621 ship. They want to know if you need assistance.
IF YOU NEED CONSUMER ASSISTANCE 479 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
480 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns.
IF YOU NEED CONSUMER ASSISTANCE 481 If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. In Canada If you believe that your vehicle has a safety defect, you should contact the Customer Service Department immediately.
482 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the These Owner’s Manuals have been prepared with the information that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC vemaintaining, servicing, and repairing Chrysler Group hicles. Included are starting, operating, emergency LLC vehicles.
IF YOU NEED CONSUMER ASSISTANCE 483 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle. significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
484 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
486 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . . . . 320 ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . 322 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 429 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 368 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . 425 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 362 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 419 Air Conditioner Maintenance . . . . . . . . . . .
INDEX 487 Body Mechanism Lubrication . . . . . . . . . . . . . . . 423 Brake Assist System . . . . . . . . . . . . . . . . . . . . . . 325 Brake System . . . . . . . . . . . . . . . . . . . . . . . . . . . 433 Anti-Lock (ABS) . . . . . . . . . . . . . . . . . . . . . 322 Fluid Check . . . . . . . . . . . . . . . . . . . . . 433,457 Master Cylinder . . . . . . . . . . . . . . . . . . . . . 433 Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 Warning Light . . . . . . . . . . . . . . . . . .
488 INDEX Caps, Filler Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368 Oil (Engine) . . . . . . . . . . . . . . . . . . . . . 409,417 Power Steering . . . . . . . . . . . . . . . . . . . . . . 319 Radiator (Coolant Pressure) . . . . . . . . . . . . . 430 Car Washes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439 Carbon Monoxide Warning . . . . . . . . . . . . . . . 85,364 Cellular Phone . . . . . . . . . . . . . . . . . . . . . . . . 97,272 Chains, Tire . . . . . . . . . .
INDEX 489 Coolant Pressure Cap (Radiator Cap) . . . . . . . . . . 430 Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . 428 Adding Coolant (Antifreeze) . . . . . . . . . . . . . 429 Coolant Capacity . . . . . . . . . . . . . . . . . . . . . 455 Coolant Level . . . . . . . . . . . . . . . . . . . . 428,431 Disposal of Used Coolant . . . . . . . . . . . . . . . 431 Drain, Flush, and Refill . . . . . . . . . . . . . . . . 428 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . .
490 INDEX Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 409 Driving On Slippery Surfaces . . . . . . . . . . . . . . . . . . 315 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . 419 Block Heater . . . . . . . . . . . . . . . . . . . . . . . . 295 Through Flowing, Rising, or Shallow Break-In Recommendations . . . . . . . . . . . . . . 83 Standing Water . . . . . . . . . . . . . . . . . . . . . . 316 Checking Oil Level . . . . . . . . . . . . . . . . . . . 415 E-85 Fuel .
INDEX 491 Filters Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . 419 Air Conditioning . . . . . . . . . . . . . . . . . . 284,422 Automatic Transmission . . . . . . . . . . . . . . . . 438 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . 418,456 Engine Oil Disposal . . . . . . . . . . . . . . . . . . . 418 Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 Flashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386 Hazard Warning . . . . . . . . . .
492 INDEX Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . . . . 455 Fluid Leaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Fluid Level Checks Automatic Transmission . . . . . . . . . . . . . 437,438 Brake . . . . . . . . . . . . . . . . . . . . . . . . . . 433,457 Cooling System . . . . . . . . . . . . . . . . . . . . . . 428 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 415 Power Steering . . . . . . . . . . . . . . . . . . . 319,457 Fluids . . . . . . . . . .
INDEX 493 Head Restraints . . . . . . . . . . . . . . . . . . . . . . . . . 140 Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451 Bulb Replacement . . . . . . . . . . . . . . . . . . . . 451 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . 441 High Beam . . . . . . . . . . . . . . . . . . . . . . 150,205 High Beam/Low Beam Select Switch . . . . . . 150 On With Wipers . . . . . . . . . . . . . . . . . . . . . 157 Passing . . . . . . . . . . . . . . . . . . . . . . . . . .
494 INDEX Ignition Key Removal . . . . . . . . . . . . . . . . . . . . . 12 Illuminated Entry . . . . . . . . . . . . . . . . . . . . . . . . 20 Immobilizer (Sentry Key) . . . . . . . . . . . . . . . . . . . 15 Infant Restraint . . . . . . . . . . . . . . . . . . . . . . . . 72,73 Information Center, Vehicle . . . . . . . . . . . . . . . . . 207 Inside Rearview Mirror . . . . . . . . . . . . . . . . . . . . 93 Instrument Cluster . . . . . . . . . . . . . . . . . . . . . . .
INDEX 495 Instrument Cluster . . . . . . . . . . . . . . . . . . . 148 Leaks, Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346 License . . . . . . . . . . . . . . . . . . . . . . . . . . . . 454 Light Bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . 88,450 Lights On Reminder . . . . . . . . . . . . . . . . . . 151 Lights . . . . . . . . . .
496 INDEX Master Cylinder (Brakes) . . . . . . . . . . . . . . . . . . 433 Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361 Mini-Trip Computer . . . . . . . . . . . . . . . . . . . 205,211 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Automatic Dimming . . . . . . . . . . . . . . . . . . . 94 Electric Powered . . . . . . . . . . . . . . . . . . . . . . 94 Outside . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Rearview . . . . . . . . . . . . .
INDEX 497 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . 196,199 Oil Change Indicator . . . . . . . . . . . . . . . . . . 198,210 Oil Change Indicator, Reset . . . . . . . . . . . . . . 198,210 Oil Filter, Change . . . . . . . . . . . . . . . . . . . . . . . . 418 Oil Filter, Selection . . . . . . . . . . . . . . . . . . . . . . . 418 Oil Pressure Light . . . . . . . . . . . . . . . . . . . . . . . 194 Oil, Engine . . . . .
498 INDEX Outlet (Auxiliary Electrical Outlet) . . . . . . . . 174 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Steering . . . . . . . . . . . . . . . . . . . . . . . . 318,319 Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Pregnant Women and Seat Belts . . . . . . . . . . . . . . 57 Preparation for Jacking . . . . . . . . . . . . . . . . . . . . 389 Pretensioners Seat Belts . . . . . . . . . . . . .
INDEX 499 Replacement Tires . . . . . . . . . . . . . . . . . . . . . . . 347 Reporting Safety Defects . . . . . . . . . . . . . . . . . . . 480 Resetting Oil Change Indicator . . . . . . . . . . . 198,210 Restraint, Head . . . . . . . . . . . . . . . . . . . . . . . . . 140 Restraints, Child . . . . . . . . . . . . . . . . . . . . . . . . . 72 Rotation, Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 349 Safety Checks Inside Vehicle . . . . . . . . . . . . . . . . .
500 INDEX Reclining . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Security Alarm (Theft Alarm) . . . . . . . . . . . . . . . . 18 Selection of Coolant (Antifreeze) . . . . . . . . . . 429,456 Selection of Oil . . . . . . . . . . . . . . . . . . . . . . . . . 416 Sentry Key (Immobilizer) . . . . . . . . . . . . . . . . . . . 15 Sentry Key Programming . . . . . . . . . . . . . . . . . . . 17 Service Assistance . . . . . . . . . . . . . . . . . . . . . . . 477 Service Contract . . . . . . . . . . .
INDEX 501 Sun Roof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88,339,483 Supplemental Restraint System - Airbag . . . . . . . . 58 Aging (Life of Tires) . . . . . . . . . . . . . . . . . . 346 Air Pressure . . . . . . . . . . . . . . . . . . . . . . . . 339 Synthetic Engine Oil . . . . . . . . . . . . . . . . . . . . . . 418 Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . 348 Changing . . . . . . . . . . . . .
502 INDEX Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . Spare Tire . . . . . . . . . . . . . . . . . . . . . . . . . . Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . Tread Wear Indicators . . . . . . . . . . . . . . . . . Tongue Weight/Trailer Weight . . . . . . . . . . . . . . Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-Hour Towing Assistance . . . . . . . . . . . . . .
INDEX 503 Vehicle Loading . . . . . . . . . . . . . . . . . . . 336,370,372 Vehicle Modifications/Alterations . . . . . . . . . . . . . . 7 Vehicle Storage . . . . . . . . . . . . . . . . . . . . . . . 283,450 Vehicle Theft Alarm (Security Alarm) . . . . . . . . . . 18 Viscosity, Engine Oil . . . . . . . . . . . . . . . . . . . . . . 417 UCI Connector . . . . . . . . . . . . . . . . . . . . . . . . . 262 Voice Recognition System (VR) . . . . . . . . . . . . . . 127 Uconnect™ (Hands-Free Phone) . . . . . .
504 INDEX Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . 38,173 Window Fogging . . . . . . . . . . . . . . . . . . . . . . . . 284 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Windshield Defroster . . . . . . . . . . . . . . . . 86,275,281 Windshield Washers . . . . . . . . . . . . . . . . . . . 154,156 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425 Windshield Wiper Blades . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
Chrysler Group LLC 12D41-126-AC 3rd Edition Printed in U.S.A.