User's Manual

Installation and Instruction Manual For
Dodge
®
TORQUE-ARM II
™
Vertical Breather Kit
TA0 – TA3
and
TA4 – TA12
www.baldor.com www.ptplace.com www.dodge-pt.com www.reliance.com
Baldor Electric Company Headquarters
P.O. Box 2400, Fort Smith, AR 72902-2400 U.S.A., Ph: (1) 479.648.5792, Fax [phone], International Fax [phone]
DODGE/Reliance Division
6040 Ponders Court, Greenville, SC 29615-4617 U.S.A., Ph: (1) 864.297.4800, FAX: [phone]
IM499387 04/07-1M-K Copyright © 2007 Baldor Electric Company All Rights Reserved. Printed in USA.
This material is not intended to provide operational instructions. Appropriate instruction
manuals and precautions should be studied prior to installation, operation or maintenance of
equipment.
WARNING: Because of the possible danger to person(s) or property from accidents which may result from the improper use of products, it
is important that correct procedures be followed. Products must be used in accordance with the engineering information specified in the
catalog. Proper installation, maintenance and operation procedures must be observed. The instructions in the instruction manuals must be
followed. Inspections should be made as necessary to assure safe operation under prevailing conditions. Proper guards and other suitable
safety devices or procedures, as may be desirable, or as may be specified in safety codes should be provided, and are neither provided by
Baldor Electric Company, nor are the responsibility of Baldor Electric Company. This unit and its associated equipment must be installed,
adjusted and maintained by qualified personnel who are familiar with the construction and operation of all equipment in the system and the
potential hazards involved. When risks to persons or property may be involved, a holding device must be an integral part of the driven
equipment beyond the speed reducer output shaft.