User guide

Engine Starting/Stopping

Starting

• With a valid Keyless Enter-N-Go Key

Fob inside the vehicle.

• Place the shift lever in PARK or

NEUTRAL.

• While pressing the brake pedal, press

the ENGINE START/STOP button once.

If the engine fails to start, the starter

will disengage automatically after

10 seconds.

• To stop the cranking of the engine prior to the engine starting, press the button

again.

Stopping

• Place the shift lever in PARK.

• Press the ENGINE START/STOP button once. The ignition switch will return to the

OFF position.

• If the shift lever is not in PARK, the ENGINE START/STOP button must be held for two

seconds and vehicle speed must be above 5 mph (8 km/h) before the engine will shut

off.

Accessory Positions with Engine Off

NOTE: The following functions are with the driver’s foot OFF the Brake Pedal

(Transmission in PARK or NEUTRAL Position).

Starting With The Ignition Switch In The OFF Position:

• Press the ENGINE START/STOP button once to change the ignition switch to the

ACC position.

• Press the ENGINE START/STOP button a second time to change the ignition

switch to the ON/RUN position.

• Press the ENGINE START/STOP button a third time to return the ignition switch to

the OFF position.

NOTE: If the ignition switch is left in the

ACC or ON/RUN (engine not running)

position and the transmission is in PARK,

the system will automatically time out after

30 minutes of inactivity and the ignition

will switch to the OFF position.

OFF RUN

ACC

Press Press

Press

GETTING ST ARTED