User Manual

Normal recording: Without earpho-
ne，push the switch to power on
position, to start normal recording.
Voice activated recording: Without
earphone, push the switch to the
voice activated recording position in
order to start voice activated recor-
ding.
Saving: Push the switch to the power
o position to save the recording
files and power o.
NOTE: During the recording process,
do not connect to the computer,
otherwise the recording file may be
lost.
Check recording status: During the
recording state, long-press + and
hold it, the red light flashes once to
indicate that the recorder is working,
and the blue light flashes when voice
activated recording.
*When connecting to a computer,
please use the original data cable.
MINI VOICE RECORDER MP3
PLAYER USERS GUIDE
Please read this user guide
carefully before use.
If you want to download the
data, please use the original data
cable. (Other data cables may
not connect properly)
The machine must be charged
with 5V voltage, if 9V fast
charging is used, it may cause
the machine to burn out*
SHAPE INTRODUCTION
Power OFF
3 STEPS SWITCH
Voice activated
recording
Power ON
RECORDING FUNCTION
PLAY FUNCTION
Plug in the adapter cable and
connect the headset.
Push the switch to power on
position, then enter music play.
Switch between Music/Recording:
Short press - to switch between
music and recording play.
Volume adjustment: Long press + or
- to adjust volume.
Track switching: During the play
state, short press + to switch to the
next song.
1
2
Connect the recorder to the
computer.
Enter the recorder disk.
Find the folder called <SET
TIME.exe>
Open the folder.
Double click <SET TIME.exe>
Confirm whether the computer
time is accurate.
Click on <SetTime>
TIME FUNCTION
1
2
3
4
5
6
7
* If you need to format the machine,
please backup this folder to prevent
loss.
PRECAUTIONS
When charging or connecting
to a computer, turn the switch
to o first. When unplugging,
wait until the light is o before
using it.
After recording, whether the
recorder is powered or not, you
must turn the switch to o to
save the recording file first.
1
2
FILE MANAGEMENT
This machine comes with
an intelligent reset system,
please save the recording
file before connecting to
the computer. The
company is not responsi-
ble for the loss of data.
PRODUCT SPECIFICATIONS
PRODUCT
TYPE
RECORD
METHOD
BATTERY
RECORDING
BIT RATE
RECORDING
FORMAT
PLAY FORMAT
Three step switch
recorder
Power on
recording, power
o saving.
Environmentally
friendly polymer
lithium battery
16 GB
Can save 192 hours
recording
192 KBPS
WAV
MP3/WMA/WAV
Samplig Rate
48 KHz
QUESTIONS & ANSWERS
The indicator light does not respond
or keeps on in an abnormal state.
Please back up important files first,
and then restore the factory settings.
After connecting to the computer,
click My Computer, find the mobile
drive letter and right-click the
mouse, select format, and then
select quick format. In this way, the
factory settings can be restored and
most of the faults can be eliminated.
No response after connecting to the
computer via the data cable.
First check whether the plug is
inserted in place. If the computer still
does not respond, try to connect to a
dierent computer. Some computers
cannot be recognized because of
lack of drivers. If you still cannot
recognize it after trying, you can
contact after-sales upgrade or
after-sales service.
Next
Long press, Vol +
Switch mode
Long press, Vol -
+
-
Insert the data cable into the
headset/charging/data port of
the machine, and then connect
the computer to charge. It is
recommended to use a USB
data cable to connect the voice
recorder to the computer for
charging.
Please use a power adapter
with a charging current of 1A or
less for charging, otherwise it
may damage the unit or cause
danger (this product does not
have a standard power adap-
ter).
When the recorder is charging,
the recorder flashes a red light;
when it is full, the blue light is
always on.
MACHINE CHARGING/
CONNECTING TO COMPUTER
1
2
3
- PAUSE / DELETE FILES -
Pause:During the play state， press +
and - at the same time to enter the
pause state (press lightly + twice to
exit the pause).
Delete a single file: Long press -
during pause to delete the currently
playing file (the blue light flashing
quickly indicates success).
Delete all files: While paused, press
and hold + and - to delete all files
(the red light flashing quickly indica-
tes success).
Note: Play recording status means
delete all recordings, and play music
status means delete all music.
- RECORDING WHILE CHARGING -
Connect the charger through the
data cable, push the switch to the
power on or voice activated recor-
ding position, press + when the red
flashing or blue light is on, and then
press + after 5 seconds and release
the button. After the light is o, it
will enter the recording while
charging mode, push the switch to
the power o position to save the
recording file and power o.
- LISTENING WHILE RECORDING -
Without earphone，push the key to
power on or voice activated recor-
ding position, when the lisght o，
you can plug the earphone then
enter listening while recording,push
the key to power o position, it can
save recording files and power o.
- FAST FORWARD AND REWIND -
Fast forward and rewind setting:In
the o state, firstplug in the adapter
cable to connect the earphone,
secondpush the switch to the power
on position, and third press - imme-
diately for 5 seconds.
Fast forward and rewind : During
play state, long press + to fast
forward, and long press - to rewind
(the volume cannot be increased or
decreased under this function).