User Manual

Warning:

Inside the A-100 power supply are dangerous vol-

tages. It is essential to take careful note of the

following safety instructions:

• Before opening up the case or moving a module or

blanking panel, always take the mains power

supply plug out. This applies equally to removing

or replacing any panel or module.

• All empty spaces in the rack must be filled with

blanking panels.

• Before use, the top and bottom covers must also be

properly fixed in place. If modules are permanently

fixed (eg. built into a 19” rack case) then the top of

the highest of the rack systems and the bottom of

the lowest must have their covers properly fitted.

The instrument must never be operated outdoors but

only in dry, closed rooms. Never use the instrument in

a humid or wet environment nor near inflammables.

Important safety notes.

Whenever electrical equipment is used, several

basic precautions need to be taken, including the

following:

• Before using any part of the instrument, read the

instructions and notes carefully.

• The instrument may only be used for the purpose

described in this operating manual. Due to safety

reasons, the instrument must never be used for

other purposes not described in this manual. If you

are not sure about the intended purpose of the

instrument please contact an expert.

• The instrument may only be operated with the

voltage written on the power input on the rear panel.

• Before opening the case disconnect the power plug.

• All eventual modifications must only be carried out

by a qualified person who will follow the valid safety

instructions. Every modification should becarried

out only at the manufacturer or an authorized ser-

vice company. Any modification not released by the

manufacturer leads to the extinction of the opera-

tion permission.

• The instrument must never be operated outdoors

but only in dry, closed rooms. Never use the instru-

Important safety notes System A - 100

doepfer