User Manual

Doepfer Musikelektronik GmbH
User manual V1.0
REGELWERK V1.2
the track and continues playing from there.
9.4.16 Sequencer Mode
−
A Track is chosen for editing by pressing one
of the Track Select buttons.
−
Tracks are turned on and off with the Track
On buttons.
−
Gate On / Off is controlled by the Sequencer
Step buttons.
•
In addition faders 9 - 24 are dedicated to
steps 1 - 16, and are used to set note number
and note velocity.
−
In Sequencer Mode, the normal Fader Mode
output from faders 9-24 is switched off, and
only faders 1-8 retain their usual fader mode
function.
•
Which function is being dealt with can be
seen from the LCD, and is switchable from
one function to the other by the menu
buttons.
•
In Sequencer Mode, the sixteen dedicated
faders (9-24) behave like the sliders or knobs
on a quantised analogue sequencer.
−
That is, once the fader is moved, the
respective parameter will immediately jump to
the value (note number or velocity) the fader
is outputting .
⇒
That means that editing with a fader is
'destructive': the old value can no longer be
recalled once a fader has been moved. As
soon as a new fader position registers, the
old value is over-written.
•
The old value remains intact, so long as it is
not deliberately over-written, and if you want
to make a small adjustment to it, relative to its
current position, select it with its respective
gate button and adjust it using the alpha dial.
•
Which of the eight Tracks' data is being
adjusted is controlled by the Track Select
buttons.