User`s guide

ManualsBrandsDogtek ManualsHousehold AppliancesBC-60

User’s guide – BC-60 – indice G 1/6

BARK CONTROL COLLAR

Model BC-60

User’s guide

Thank you for choosing the DOGTEK product range.

Before using the bark control collar, please read carefully the explanations in this manual, and keep it

safely for future reference.

Advice to obtain the best results

The owner’s involvement during the first use of the product

is a key factor in obtaining the best results.

Do not leave your dog unattended with the collar on until he is used to wearing it and you are satisfied that it

is working correctly. You should ensure that the settings (barking detection sensitivity / operating mode) are

adjusted correctly for your dog.

Closely watch your pet during the first days’ use.

When your dog is barking, let the collar operate without interference. Any interference on your part could be taken as

a sign of consideration and consequently barking would be an effective mean to have your attention attracted.

As soon as your dog stops barking, congratulate him (but not excessively) by stroking him, verbally flattering him,

or giving him dry food so as to encourage him to behave himself.

Remember that barking can indicate some behavioural problems. The bark control collar will allow you to resolve

problems caused by excessive barking.

Summary of content (6 pages)

PAGE 1
BARK CONTROL COLLAR Model BC-60 User’s guide Thank you for choosing the DOGTEK product range. Before using the bark control collar, please read carefully the explanations in this manual, and keep it safely for future reference. Advice to obtain the best results The owner’s involvement during the first use of the product is a key factor in obtaining the best results. Do not leave your dog unattended with the collar on until he is used to wearing it and you are satisfied that it is working correctly.
PAGE 2
Index Page Advice to obtain the best results ..................................................................................................................... 1 Foreword ..................................................................................................................................................... 2 Package contents .........................................................................................................................................
PAGE 3
 Description of the product Nr 1 setting mask Diagram 1 Barking detection contact point Short or long contact point Strap Access to settings Nr 2 setting mask Cover Screwdriver Diagram 2 Stimulation inhibition (beep sounds only) Short stimulations Long stimulations Stimulation switch Barking detection contact point On/Off switch Off User’s guide – DOGTEK BC-60 On Regulating screw for barking detection sensitivity The system does not practically detect any barking once the screw is tightened
PAGE 4
 Power On the collar BC-60 is supplied with battery fitted. Lift the Nr 2 setting mask (cf. Diagram 1) and turn the On/Off switch to On (cf. Diagram 2). After a few seconds, a beep sound will be emitted indicating that the collar is ready for use.  Adjustment and positioning of the collar The strap must be adjusted so that the contact points are in contact with the dog’s skin. − If the strap is too loose, the collar is likely to move and repeated friction can irritate the skin of your dog.
PAGE 5
 How to use BC-60 The BC-60 bark control collar has several functions (beep sounds, short or long stimulations, sensitivity regulation). You must thoroughly understand how it works and adjust the collar before placing it around your dog’s neck. We advise you to start with beep sounds without stimulations. In this way the dog can understand the connection between the operation of the device and its barks.
PAGE 6
 Troubleshooting Before thinking your collar is broken, read this booklet over and make sure that the problem is not caused by a weak battery or incorrect settings (barking detection sensitivity, operating mode). If the problem persists, contact DOGTEK Customer Care. According to the extent of the malfunction, you may have to return your product for Service and repair.