Owner`s manual

10 11
Understanding your training system
1. How to turn the EDGE on/o
To turn the transmitter on, hold down the blue button on the back of the
transmitter until the LCD screen illuminates. To turn the transmitter off,
hold down the blue button on the back of the transmitter until the LCD
screen shuts off.
To turn the receiver/collar on, hold down the on/off button until the LED
indicator turns green. To turn the receiver/collar off, hold down the on/
off button until the LED indicator turns red.
2. How the transmitter mode buttons work
Turn the mode selection dial to choose the function, and then press the
button on the front that is set to the desired collar. The single dog EDGE
transmitter comes set to the black button.
N (Nick)
Nick is a single ½ second
stimulation.
P (Pager)
Pager gives a non-stimulating
vibration while the button is
pressed for up to 12 seconds.
C (Constant)
Constant gives a continuous
stimulation while the button is
pressed for up to 12 seconds.
On / Off
Button
On / Off
Button
LED
Indicator