CONTENTS OVERVIEW 2 MAIN FEATURES 3 PACKAGE CONTENTS 3 IMPORTANT SAFEGUARDS 4 DESCRIPTION OF TRANSMITTER PARTS 5 DESCRIPTION OF RECEIVER PARTS 8 DESCRIPTION OF LAUNCHER PARTS(QL, PL) 11 ASSEMBLY AND OPERATION 14 ADJUSTING SPRING STRENGTH SETTINGS 21 CHARGING THE BATTERIES 23 RECEPTION 26 ACCESSORIES 27 BASIC MAINTENANCE 28 WARRANTY AND REPAIR INFORMATION 29 1
OVERVIEW OVERVIEW Thank you for purchasing Dogtra remote release bird launcher systems Dogtra remote release bird launcher system is an effective tool to train your dogs to hold a point or stop to flush. With a remote release bird launcher system you can train your dogs by yourself. Dogtra remote release bird launcher system uses a transmitter and a receiver to release the launcher from a remote location. Sound functions on the receiver can be used to train a dog or to find a launcher in heavy cover.
DESCRIPTION OF TRANSMITTER PARTS IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS DO NOT use the bird launcher until you have read this manual. Transport the launcher in a safe position. It should either have the bird cradle open or if it is closed, the safety pin must be inserted to lock the release latch. DESCRIPTION OF TRANSMITTER PARTS Transmitter 1. Antenna 2. Indicator Light (LED) To store for long periods of time, place the bird launcher in the open position to prevent the springs from weakening.
DESCRIPTION OF TRANSMITTER PARTS 1. Antenna : A 2 Antenna is supplied with Dogtra RR Deluxe transmitter. The antenna must be fastened to the transmitter before using the unit. 2. Indicator light(LED) : The color of the light indicates the status of battery life. (Green = full, Amber = medium, Red = needs charge) The indicator light glows when buttons are pressed as well. DESCRIPTION OF TRANSMITTER PARTS 6.
DESCRIPTION OF RECEIVER PARTS DESCRIPTION OF RECEIVER PARTS Receiver 1. Flexible Antenna DESCRIPTION OF RECEIVER PARTS 1. Flexible antenna : Flexible antenna is located on the top of the receiver. Please do not bend the antenna forcibly for it can cause serious reduction in range. 2. Speaker horn : Sound horn emits loud beep tone or quacking sound when you press “beeper” or “duck call” button. 2. Speaker Horn 3. On/off switch : Press on/off switch to turn on and off the power. 3. On/Off Switch 6.
DESCRIPTION OF RECEIVER PARTS charging, make sure the rubber cover is fully seated so that dirt will not enter the receptacle. 6. Left jack : Jack located on the left side where a launcher can be plugged. DESCRIPTION OF LAUNCHER PARTS (QL, PL) DESCRIPTION OF LAUNCHER PARTS (QL, PL) 1. Bird Cradle 7. Right jack : Jack located on the right side where another launcher can be plugged. 8. External speaker jack : Jack for an external loud peaker, which can be purchased separately 2. Cradle Bar 7.
DESCRIPTION OF LAUNCHER PARTS (QL, PL) DESCRIPTION OF LAUNCHER PARTS (QL, PL) Launcher size (Launcher) - for quail - 8.6 4.5 4.3 - Excellent choice for quail and pigeons (Launcher)- for pheasant - 13.2 6.9 6.9 - Handles large birds with ease 1. Bird cradle : Bird cradle holds a dummy or bird for launching. 2. Cradle bar : Cradle bar supports a bird cradle. 3. Launcher box : Launcher box contains large holes for maximum air flow and scenting possibilities. 4.
ASSEMBLY AND OPERATION ASSEMBLY AND OPERATION ASSEMBLY AND OPERATION Assembly Figure 2. Plugging solenoid cord into the receiver. Figure 1. Mounting the receiver 2) Plug the solenoid cord into the receiver’s left jack 1) To mount the receiver, attach the receiver to the launcher box and push down gently so that it locks in place. Check to see whether receiver is attached securely by pulling on the receiver.
ASSEMBLY AND OPERATION Assembly for two launchers ASSEMBLY AND OPERATION How to launch the Dogtra remote release bird launchers First, test the launcher without any dummy or bird inside. WARNING Keep your head away from the top of the launcher when it is loaded. You could be injured if the dummy or bird is launched accidentally. Figure 3. Assembling two launchers in one receiver 1) Mount the receiver to the launcher. 2) Plug the solenoid cord into receiver’s right jack.
ASSEMBLY AND OPERATION Figure 5. Setting the latch. 2) Place the release lever under the latch roller bearing. 3) Turn the receiver on. Make sure that the safety pin has been pulled out. ASSEMBLY AND OPERATION Figure 6. Remote launcher released. 4) Press the transmitter’s left or right launcher button depending on which jack (left or right) it’s connected to. The remote launcher is working properly if the bird cradle pops open like the diagram above.
ASSEMBLY AND OPERATION ADJUSTING SPRING STRENGTH SETTINGS ADJUSTING SPRING STRENGTH SETTINGS Figure 7. Using the external loud speaker (optional) 6) Plug the external speaker cable to the external speaker jack located on the bottom right side of a receiver. External speaker can be purchased separately. 7) Press the transmitter’s beeper button or duck call button. The external speaker should emit a loud beep or quack sound. 20 Figure 8.
ADJUSTING SPRING STRENGTH SETTINGS CHARGING THE BATTERIES CHARGING THE BATTERIES Figure 9. Positioned for low launch 2) Turning counter-clockwise will move the springs up for a low and quiet launch: the very top being the lowest. 1. Charge the unit about 10 hours before using the unit for the first time. 2. Do not charge the batteries near any flammable substances. 3. Fully charge your units every 3 months if your units are to be stored away for more than a couple of months or longer.
CHARGING THE BATTERIES Battery Charging Procedure Note : The unit has a partial charge when it leaves the Dogtra facility, upon receipt of the launcher systems, be sure to give it a full 10-hour initial charge before the first use. 1. Attach the charging cables to both the transmitter and receiver(s), as shown on page 23. CHARGING THE BATTERIES 4. After charging, cover the battery charging receptacles with the rubber plugs on the transmitter and receiver.
ACCESSORIES RECEPTION RECEPTION The has a range of 1 mile. Depending on the way you use your transmitter, the transmitter range may vary. Hold the transmitter away from your body and avoid touching the antenna, to get the greatest range. For maximum signal strength, keep your unit properly charged. ACCESSORIES The following items may be purchased separately by calling our customer service at (888) 811-9111. You may also browse the selection at shop.dogtra.com.
BASIC MAINTENANCE BASIC MAINTENANCE Be sure that the rubber charging plugs are always secured when the collar is in use. If your plugs break or are ripped, please contact Customer Service at info@dogtra.com or (888) 811-9111 to obtain replacements. After each session, carefully inspect your unit for any missing parts, or casing damage. Broken casings on either the receiver or transmitter may affect the waterproof guarantee of the unit.
WARRANTY AND REPAIR INFORMATION Dogtra DOES NOT replace defective units or provide refunds for products purchased from us after 30 days from the date of purchase. Dogtra DOES NOT cover the cost of shipping outside of the Continental United States. Issues of replacement and refunds on units purchased less than 30 days from an authorized dealer must be addressed to the dealer directly.