Owner's Manual

7. Charging the Battery

The Dogtra 280C uses a lithium polymer battery.

Recharge the unit if the indicator light is red or does not

come on, the transmitter LCD shows only 1 bar on the

indicator, or the system will not stay on when any button

is pressed.

NOTE 1: Only use Dogtra-approved batteries, chargers,

and accessories for your Dogtra e-collars. This will prevent

any damage that can be incurred from attempting to use

a different charger.

NOTE 2: The unit has a partial charge when it leaves the

Dogtra facility. Upon receipt of the system, be sure to give

it a full 2-hour initial charge before the first use away from

any flammable substances.

NOTE 3: When a charger is not in use, disconnect it from

the power source. Fully charge the batteries if the unit is

to be stored without use for a period of 3 months or more.