User Manual

4. Correction Level Adjustment
■
The correction levels can be adjusted up or
down by pressing the correction level
adjustment buttons.
■
Start at level 1 and increase the intensity level until you notice a reaction from
your dog; a quick head shake, looking down, even flicking an ear. You must
be focused on your dog when doing this. When you see the reaction, that is
the level to start training. The appropriate level varies from dog to dog.
✧ We recommend using the lowest effective correction level. ✧
5.
Collar
1
/ Collar
2
Feature
Every BigLeash transmitter comes with two-dog capability. Your transmitter
comes set for use with one dog but can easily be programmed for two dogs.
■
If you are working with two dogs, you will need two receiver collars.
Information about setting the remote trainer to work with two dogs is
provided on page 20.
■
The Collar 1 and Collar 2 buttons allow you to change commands between
the two collars. When working with 2 dogs (two collars), the transmitter
saves the settings for each collar. The settings are stored in memory and
change automatically when you switch from Collar 1 to Collar 2.
■
When working with 2 collars (two dogs), the display on the LCD screen will
indicate if the transmitter is set to send the signal to the Collar 1 or Collar 2.
6. Correction Button A [Audible / Vibration]
■ Pressing the ‘A’ button sends either an audible
warning (sound only) or a vibration warning to the
dog’s receiver collar. This warning signal continues
as long as you press the button (up to 8 seconds.)
7. Correction Button B [Brief]
■ Pressing the ‘B’ button sends a brief correction (~1 second) to the dog’s
receiver collar.
8. Correction Button C [Continuous]
■ Pressing the “C’ button sends a continuous correction as long as you
hold the button down. If the button is not released, the correction will
automatically stop after 8 seconds.
To repeat any of the corrections, release the button and press again.
6
Correction Buttons
Use the ▲ and ▼ buttons to
the right of the LCD screen
to adjust the correction level.
Brief
Brief
Audible &
Audible &
Vibration
Vibration
Continuou
Continuou
s
s
Remember: Level 0 = Safety Mode
(no audible, no vibration, no correction)