User's Manual

10
SMARTFENCE PORTAL SETUP
The SmartFence Portal collects all status information from your SmartCollar and
SmartFence Transmitter and sends it to you! Your Portal will also indicate that your
system is working properly via three indicator lights: Boundary Loop, Internet, and
Collar. (You must complete App profile setup for all indicator lights to turn green.)
Follow these steps to setup your SmartFence Portal:
1. First, connect the Portal to Power.
Plug the power cord into the nearest outlet located by your router
and connect to the rear port on your Portal.
2. Second, connect the Portal to the Web.
Plug your ethernet cord into one of the rear ethernet ports on your
router and connect the other end of your ethernet cable to the rear
port to the Portal.
NOTE: Once the Portal is plugged into power and connected to an ethernet port on your router the
Center Internet Indicator light will turn green. Once it connects to your SmartCollar and Transmitter
the Boundary Loop and Collar Indicator will also turn Green
Collar
Indicator Light
Internet
Indicator Light
Boundary Loop
Indicator Light
Boundary
Status
Internet
Connection
Status
Collar
Status
Power
Supply Port
Ethernet
Port
Antenna
Rear View
2