User's Manual

* Never adjust the transmitter while your dog is wearing the receiver collar.

1. Power On/Off: This switch gives you easy access to turn the transmitter ‘ON’ or ‘OFF’. The

green Power light on the front panel lets you know that it is operating properly.

2. Power Supply: The transmitter is powered by the power supply/adapter provided with the

transmitter. The power supply is plugged into a properly grounded 110 volt outlet and the

adapter is plugged into the “PWR” jack on the bottom of transmitter.

3. PowerPak™: The optional PowerPak battery back-up keeps the Transmitter operating in the

event of a power failure. When the transmitter is being powered by the battery back-up, the red

power light will remain off. The PowerPak plugs into the Transmitter at “P-PAK”.

NOTE: After the SmartFence is installed and set up complete, the WebApp will alert

you if and when the PowerPak battery back-up has been activated.

4. Ground Wire: The green ground wire connects to the Transmitter at the location labeled “GND.”

The round connector on the green ground wire is attached under the screw on the outlet

faceplate. It will, however, only be effective if your outlet is properly grounded. If you have any

questions about having a properly grounded outlet, consult your local electrician.

5. Boundary Loop Plug: Your system includes a zip cord with a plug on one end. This plug

ﬁts into the hole marked “Loop” on the bottom of the transmitter. This is the beginning of the

boundary wire that is buried in your yard.

NOTE: After the boundary wire has been properly installed and plugged into the

Transmitter, the Range and Boundary Loop Monitor light will turn on.

SMARTFENCE TRANSMITTER FEATURES & SETTINGS

The Transmitter’s coded digital FM radio signal can be adjusted, allowing you to

control the settings of the Hidden Fence around your property.

Power

On/Off

Range

Control

Range & Boundary

Loop Monitor

Display

Power Supply PowerPak

™

Ground Wire Boundary Loop Plug

Rate

Adjustment

Training

Mode Switch

2 3 4 5

Bottom View