User's Manual

15
9. Collar Bone: The Collar Bone, metal lock washers and contact posts fasten the
receiver to the nylon collar. (A Collar Bone is not used with the GentleFit™ posts)
10. Lock Washers: See #9 above.
11. Contact Posts: The receiver comes with a set of stainless steel contact posts
(stainless steel or composite with stainless steel tips.) Conductive plastic ‘GentleFit’™
contact posts may be purchased separately if preferred or if recommended by your
Dealer.
NOTE: Your DogWatch Dealer will determine the correct set based on your dog’s coat,
neck shape, and skin sensitivity. The posts must make contact with the skin in order
for the dog to feel the correction. In certain cases, your dealer may recommend
clipping some of the hair around the contact posts so that they can touch the skin
more easily. Use care if you find it necessary to tighten the contact posts with the
collar wrench, as over-tightening could cause damage to the receiver.
FUNCTIONALITY FEATURES
Antenna:
The receiver’s omni-directional antenna design assures optimal reception
from the signal field.
SafeLink
®
Digital FM Design:
Our patented FM design allows the SmartCollar to recognize and activate only to our
unique radio signal. This protects your pet from unintentional correction caused by stray
radio signals which may be emitted by other electronic devices.
AutoMemory™:
Our patented AutoMemory™ feature automatically adjusts the correction level of the
receiver when your pet challenges the boundary. When the receiver is set to one of the
AutoMemory levels, and the dog enters the signal field, the dog will receive the correction
of the initial setting. If your dog leaves the signal field, the receiver will automatically advance
the correction level setting by one, and only one level. If the dog does not re-enter the
signal field within the next 24-hour period, the receiver defaults to the original setting. The
AutoMemory feature operates when your Receiver Training Level is set to 4, 5, or 6.
FastReact™ Time:
Whether your dog, strolls, runs or sprints into the Avoidance Zone, the receiver will react—
and correct—within 1/8 of a second (.125 sec).
Automatic Shutdown:
The DogWatch SmartFence is designed to protect your dog from an over-correction in
the unlikely event that your dog gets caught in the signal field. If your dog does not exit the
signal field, the receiver will automatically stop correcting after 15 seconds—protecting
your dog from over-correction. The receiver will automatically reset once the dog leaves the
signal field.
SMARTCOLLAR
FEATURES & SETTINGS
3