User's Manual

SMARTCOLLAR

™

STATUS LIGHT

The status light on your SmartCollar continuously monitors your receiver and

provides these features.

• Start-Up When you ﬁrst insert the battery,

the status light will ﬂash red and green.

This indicates that the receiver has started

properly. Once started, the status light will

continue to ﬂash green once every 40 seconds

indicating normal operation. In the event that

the light does not ﬂash, check the battery to be

sure that it has been inserted properly.

• Training Level Indicator When programming the training level of your receiver

(see page 14), the status light will ﬂash green in conjunction with audible

beeps. The number of ﬂashes/beeps will equal the training level you have

chosen.

• Signal Field Indicator When testing the receiver in the signal ﬁeld, the status

light will ﬂash green when the SmartCollar is in the audible zone and will ﬂash

red and green when the SmartCollar is in the correction zone.

• Correction Alert (TattleTale™) You will be able to tell if your pet has tested

the boundary by looking at the status light. The status light will double ﬂash

green every 40 seconds during the 24-hour period after the dog has entered

the boundary area.

• Battery Indicator This feature monitors the voltage level of the battery. Once

the SmartCollar detects that the battery has reached a low voltage level, the

status light will change from blinking green every 40 seconds to blinking red

every 10 seconds. This indicates that your battery is close to the end of its

useful life and you should change the battery within the next 3-4 days.

Status Light