User Guide


1. In standby mode, press and hold TIME SET/MEMORY/DISPLAY to the
time adjust mode;
2. When the display begins to flash, please select time mode between 12HR and 24HR
by or buttons;
The AM or PM indicators will light up against the time setting when in 12HR mode;
3. Press TIME SET/MEMORY/DISPLAY button move to adjust the HOUR time, adjust
by or buttons;
4. Press TIME SET/MEMORY/DISPLAY button to adjust the MINUTE time. adjust by
or buttons;
5. Press TIME SET/MEMORY/DISPLAY button to finish time setting.
Setting the Clock
button
Operation (continued)

1. In the standby mode;
2. Press until the time is flashing;
3. Press or to adjust the hour time,
Press move to adjust the minute by or , press finish alarm time setting;
4. When the alarm indicator light is flshing, press or to select the Alarm type
(between Buzzer and Radio);
5. Press move to the Alarm volume mode;
6. Press or to adjust the volume level;
(Alarm1 and Alarm2 are setting the same way).
Setting the Alarm

1. Alarms are automatically armed when set Active alarms are indicated by alarm types
on the display;
2. To review the alarm time, press and release the ALARM button once, the alarm time
will shows on the display; press the ALARM button the 2nd time, The related wake up
source will display;
3. Double click the related Alarm button to toggle it ON or OFF, If the alarm is armed,
the alarm icon will light up.
Reviewing, Arming and Disarming Alarm

When the alarm is sounding, press the related Alarm button or the SOURCE button
to stop it and reset it to next day.
Stop the Alarm

Default snooze time is 9 minutes. Press and release the SNOOZE/DIMMER after an
alarm sounds. The alarm will be silenced for the snooze time then sound again.
Snooze can be pressed several times.
Snooze Operation
15