User Manual

ManualsBrandsDolan-Jenner ManualsOptical devices170-D

INSTRUCTION

MANUAL

Your purchase of the Dolan-Jenner

Fiber-Optic Illumination System will

provide you with many years of service

in a large variety of applications which

require high intensity, yet cool

illumination. Please read the following

instructions to ensure that maximum

performance is obtained from your system.

Model 180 and 170-D Illuminators are readily interchangeable within the systems. The

exceptions are with System 181, 181A and 181B which require the Model 180

Illuminator for the support of the self-supporting fiber optic light pipes EEG 2823, EEG

3922 and BG 2820. In addition the Model 180 has the lowest noise and vibration

characteristics that can be incorporated into any unit, which makes it especially suitable

for high magnification stereo-microscope usage.

Fiber-Lite Illuminators achieve maximum reliability and lamp life due to certain design

considerations incorporating air flow parameters that result in long lamp life and cool

housing temperatures as well as component reliability.

ADAPTERS (SX TYPE)

The Adapters fit into the Illuminator nosepiece with the flat area facing up. The idler

hole on the flat area is off center, and the shortest dimension faces the illuminator when

inserted.

The SX 5, 6, & 7 adapters are made with an idler which provides quick disconnect

features that require only a few turns of the thumbscrew on the Illuminator nosepiece to

attach or disengage the fiber optic light pipe.

SYSTEM 181 ASSEMBLY INSTRUCTIONS

Due to the self-supporting features of the fiber optic light pipes (BG 2820, EEG 2823,

EEG 3922) it is necessary to remove the thumbscrew on the Illuminator and replace it

with a 7/64 socket head cap screw provided. The SX-11 adapter is then inserted as above

followed by the fiber optic pipe with the flat surface facing up. . Then insert the fiber

optic pipe with the flat surface facing up. Use an Allen Wrench to sufficiently secure the

fiber optic so that there is no rotation.

Fiber-Lite

HIGH INTENSITY FIBER OPTIC ILLUMINATORS

MANUAL FL180/170

for Models 180 & 170-D

Illuminators

Summary of content (4 pages)

PAGE 1
MANUAL FL180/170 Fiber-Lite ® HIGH INTENSITY FIBER OPTIC ILLUMINATORS INSTRUCTION MANUAL for Models 180 & 170-D Illuminators Your purchase of the Dolan-Jenner Fiber-Optic Illumination System will provide you with many years of service in a large variety of applications which require high intensity, yet cool illumination. Please read the following instructions to ensure that maximum performance is obtained from your system. Model 180 and 170-D Illuminators are readily interchangeable within the systems.
PAGE 2
THUMBSCREW FLAT with IDLER HOLE 5 4 6 7 8 3 2 ON 9 1 10 INTENSITY (For system 181, 181A and 181B see System 181 Assembly instructions.) OFF INSERT ADAPTER NOSEPIECE FIBER OPTIC LIGHT PIPE INSERTION Insert the Fiber Optic Light Pipe into the adapter and tighten the thumbscrew to secure the fiber optic in the Illuminator. MOUNTING STANDS For some applications a mounting stand is required to secure the fiber optic gooseneck in an operating position.
PAGE 3
LINE BK BK LINE G G XFMR XFMR SCHEMATIC 180 BK BK BK W W R LAMP W BK BK SCHEMATIC 170 - D FAN MOTOR BK W W R LAMP W FAN MOTOR CHANGING THE ILLUMINATOR LAMP Should the need arise to replace the EKE type lamp the following procedure should be used: 1. Unplug the illuminator from the wall socket. 2. Wait until the illuminator nosepiece is cool to touch. 3. Raise the cover of the illuminator. 4. Pull up on the EKE lamp to remove it from the lamp holder. 5. Remove the lamp from the socket.
PAGE 4
PERFORMANCE STATEMENT Dolan-Jenner Industries, Inc. (DJI) recognizes that its illuminator products may be used under an almost unlimited variety of conditions. As such, we are prepared to assist the customer in the selection and application of any of these products. This includes application engineering, sample testing and other means as determined by DJI.