Instruction Manual

6. Equipment operation
6.1. Attaching a fi ber optic adapter
If fi ber adapter is not already attached to Fiber Illuminator unit, orient
the adapter such that the adapter code designation is viewable on the
top of the adapter as shown below. Insert the adapter into the Fiber
Illuminator aligning the three pins with the corresponding three slots,
push and twist clockwise until the thumbscrew is oriented horizontally
as shown.
6.2. Turning the illuminator on and off
To turn the illuminator on, push the power switch on the lower left of
the front panel to the ON position. A green indicator light will turn on
when the illuminator is powered on.
To turn the illuminator off, push the switch to the OFF position.