Specifications

16 Dolby
®
Professional Reference Monitor Manual
Using the Professional Reference Monitor
Thekeyilluminatesinyellowandthe
CRT Mode: InputscreenappearswithInput
Format
andVideo Rangeparameters,asshowninFigure 2‐15.ThisisthefirstCRT
referenceeditingscreen.
The
Inputtabatthebottom‐leftsideofthescreenishighlighted,indicatingitisthe
activemenuselection.
Figure2‐15 
Figure 2-15 CRT Mode: Input Screen
3. Tochangeacurrentsetting,presstheup/downarrowkeystohighlightthedesired
parameter,andthenpress
ENTER.
Ifyouselect
Custom,the Custom Video Rangedialogboxappears,asshownin
Figure 2‐16.
Figure2‐16 
Figure 2-16 Custom Video Range Screen
Inthisscreen,youcanenterthedesiredvideorangesettingsbyusingthearrowkeys
toselecteachfieldandpressing
ENTERtoactivatethefield.Theup/downarrowkeys
illuminate,indicatingyoucanusethesetoincrease/decreaseeachvalue.Toscrollup
anddownthroughtherangeofvalues,press andholdthearrowkeys.Alternatively,
youcanusethenumerickeypadtodirectlyenterthedesiredvalue.Tosaveyour
entries,press
ENTER again.
YoucandisplayanotherCRT
referencescreenbypressingthedownarrowkeyuntil
youactivatethetabmenu,thenpresstheright/leftarrowkeysorthe
EDITkey.
Caution: Thesystemsavesyourchangesinanedit screenonlywhenyoupressENTER.
YoucanquitanydialogboxbypressingtheESC key.
Active menu