Installation manual

Dolby
®
Model CP650 Installation Manual Final Adjustments
7-11
F
orma
t
80/81
PCM Options
>Auto Mute: Disabled
Decode: L/R Stereo
Saving Changes...
7.9 Assigning NS Button Format
The nonsync button, “NS,” can be assigned to any available format. Then, when the
button is pressed, that format will be selected. Follow the procedure in the previous
steps.
7.10 Format 80/81 PCM Options
Use this menu to change the settings for processing a PCM digital input to the
Cat. No. 790 or 794 card, or the first digital input of the Cat. No. 778 card (Option
Card I/O connector). Pro Logic
®
decoding can be applied to the signal if desired.
Auto-Mute causes the CP650 outputs to mute automatically if a Dolby Digital
bitstream input is not present. When a PCM input bitstream is detected, the CP650
outputs will mute. Use this option with caution.
+
Press the left menu button, or press and hold the
button while rotating the front-panel knob to
move to the Format 80/81 PCM Options menu.
Auto Mute
Disable/Enable
Decode
L/R Stereo/Pro Logic
Press the middle menu button to choose between
setting PCM Auto Mute and PCM
Pro Logic Decode.
Note: Be aware that enabling PCM auto mute will not allow the
CP650 to play back any PCM content.
Rotate the front-panel knob to make the
selections.
OK
Press the OK button to save the settings.