Installation manual

Dolby
®
Model CP650 Installation Manual Introduction
1-5
Loudspeaker Equalization
L, C, R, Ls, Rs, Bsl, Bsr: Digital 27-band, 1/3-octave, plus bass and treble control
Le, Re (when equipped with optional Cat. No. 791): Digital 27-band,
1/3-octave, plus bass and treble control
SW: Digital parametric with 12 dB cut capability
Distortion
Typically 0.005% in Dolby SR mode (output –10 dBu, input 10 dB over Dolby level)
Dynamic Range
Typically 99 dB with fader set to 7
Power Requirements
Main supply: 100–120 and 200–240 VAC, 50–60 Hz, 100 W maximum (including
built-in bypass power supply)
Unit designed to operate from a centrally switched power source
Dimensions and Weight
3-U rack-mount chassis; faceplate: 133 × 483 mm (5.25 × 19 inches)
Maximum projection behind equipment rack rail: 365 mm (14.4 inches)
Maximum projection in front of mounting plate: 38 mm (1.5 inches)
Net: 10.4 kg (23 lb)
Environmental Conditions
Operating: 0° to 40°C (32° to 104°F), forced-air cooling
Humidity: 20 to 80% relative humidity, noncondensing