Installation manual

Dolby
®
Model CP650 Installation Manual B-Chain Alignment
4-12
C
rossover
C
on
fi
g:
Channel: Left
Param : F Type Low
>Value : Butterwth.
>Value : Butterwth.>Value : Butterwth.
>Value : Butterwth.
C
rossover
C
on
fi
g:
Channel: Left
>Param : F Type High
>Param : F Type High>Param : F Type High
>Param : F Type High
Value : Lkwz.-Rly.
C
rossover
C
on
fi
g:
Channel: Left
Param : F Type Low
>Value : Butterwth.
>Value : Butterwth.>Value : Butterwth.
>Value : Butterwth.
menu
OK
menu
OK
menu
OK
If you configured the crossover mode as
2-Way, there is one crossover point for
setting the filter type. Press the center menu
button to move the arrow to Value.
Rotate the front-panel knob to select the
Butterworth filter type
If you configured the crossover mode as
3-Way, set the filter type for the high-
frequency crossover point:
For a 3-Way crossover, press the center
menu button to move the arrow to the
Parameter selection, and rotate the front-
panel knob to select High for the
mid-to-high crossover filter type.
Select the type of filter that you wish to use
for the high-frequency crossover by
pressing the center button to select Value.
Rotate the front-panel knob to select the
Butterworth filter type.