User`s manual

Dolby
®
CP650 Digital Cinema Processor User’s Manual Operating Instructions
2-8
Fader Setting
Main Fader
Fader Setting
Auditorium
Preset Fader Levels
>Format xx
Fader: xx.x
Preset Fader Levels
Format xx
>Fader: xx.x
2.2.3 Auditorium Fader
If an analog auditorium fader pot (not a Dolby Cat. No. 779 Digital Remote Unit or
Cat. No. 771 Remote Fader) has been installed, it is activated by performing the
following menu steps:
1. Press multiple times, or press and hold the button while
rotating the front-panel knob to move to the Fader Setting
screen.
2. Rotate the fader knob to select Auditorium.
3. Press
OK to save the change.
4. Press the illuminated format button to return to normal operation.
To return control to the main fader or digital remote faders, repeat steps 1–4 and
select Local on the fader setting menu.
2.2.4 Assigning Preset Fader Levels
Preset levels can be assigned to each front-panel format button.
1. Press to move to the Preset Fader Levels menu,
then rotate the front-panel knob to select the front-panel
button you wish to preset (01, 04, 05, 10, 11, U1, U2, or NS).
2. Press to move the selection to Fader, then rotate the
front-panel knob to the desired level setting for this
button (1–10).
3. Press
OK to save the preset for this button.
4. Repeat the steps above to set the preset fader levels desired for other buttons and save
the changes.
5. Press the illuminated format button to return to normal CP650 operation.