User`s manual

Dolby
®
CP650 Digital Cinema Processor User’s Manual Operating Instructions
2-12
Power On Format
Contrast Adjustment
> 10
2.2.10 Selecting the Power-On Format
Each time the CP650 is connected to power, it automatically sets itself to the selected
power-on format. Use this menu item to store a specific power-on format or to select
the format that was active when power was turned off.
1. Press to move to the Power On Format Select menu,
then rotate the front-panel knob to select which format button
will be active at power-on.
2. Press OK to save your changes.
3. Press the illuminated format button to return to normal CP650 operation.
2.2.11 Setting the Front-Panel Display Contrast
The liquid crystal display (LCD) contrast can be adjusted to give the clearest possible
readability.
1. Press to move to the Contrast Adjustment menu, then
rotate the front-panel knob while watching the display. Adjust
for the most pleasing appearance. This example shows the
contrast set to 10.
2. Press OK to save your changes.
3. Press the illuminated format button to return to normal CP650 operation.
2.2.12 Operation with an Automation System
When the CP650 in your theatre is connected to automation equipment, the format
selection is duplicated elsewhere. Usually, the front-panel buttons of the CP650 can
be used to override commands from the automation system; however, as automation
equipment differs from installation to installation, check with your system installer if
you have any questions about overriding the automation commands.