User`s manual

Dolby
®
CP650 Digital Cinema Processor User’s Manual Advanced Operations
A-4
Format 80/81
PCM Options
>Auto Mute: Disabled
Decode: L/R Stereo
A.4 Format 80/81 PCM Options
Use this menu to change the settings for processing a PCM digital input to the CP650.
Dolby Pro Logic
®
decoding can be applied to the signal if desired.
Auto mute causes the CP650 outputs to mute automatically if a Dolby Digital
bitstream input is not present. When a PCM input bitstream is detected, the CP650
outputs will mute. Use this option with caution.
1. Press , or press and hold the button while rotating the
front-panel knob to move to the Format 80/81 PCM
Options menu.
2. Press to choose between setting PCM Options to Auto Mute (Disabled or
Enabled) and PCM Dolby Pro Logic Decode (L/R Stereo or Pro Logic).
Note: Be aware that enabling PCM auto mute will not allow the CP650 to play back
any PCM content.
3. Rotate the front-panel knob to make the selections.
4. Press OK to save the settings.
A.5 Remote Address
You can confirm that Dolby remote units are connected to and communicating with
the CP650 by selecting the Remote Addresses menu on the CP650.
1. Press
, or press and hold the button while rotating the front-panel knob to move to
the Remote Addresses menu.
2. The single-digit address of each connected remote unit is displayed. Up to three
remote units may be connected to the CP650.