Installation manual

Model DMA
™
8 Installation Manual
2-1
Chapter 2
Installation
2.1 Unpacking
Before unpacking the DMA
™
8, inspect the outer carton for shipping damage. If the
carton shows damage, inspect the unit in those areas.
Carefully remove the unit from its carton, remove the plastic wrapping, and place on
a flat surface. Look for the following items, which are packed with the DMA8:
• PC setup software
• Power cord
• Spare fuse
2.2 Equipment Required
A PC running Windows
®
98 or later is required for proper installation of the DMA8: