Installation manual

Model DMA
™
8 Installation Manual Setup
3-3
3.2.2 Change Settings
Figure 3-3 Settings Screen
Select the cinema processor model connected to the DMA8.
Digital Input
Select which digital inputs you wish to associate with the Digital Media front-panel
button. When Digital Media is selected via the front-panel button, or via the digital
media automation connections, the DMA8 automatically selects the active input by
priority based on the list of choices. If choices are not made on this screen, the DMA8
scans all inputs and locks on the first input it finds with a valid data stream.
CP (Cinema Processor) Automation Pin Assignments
If you are performing the setup with a Dolby CP500, confirm that the default formats
are assigned to the appropriate softkeys. Use the pull-down arrow for reassignment, if
necessary.
Digital Media Surround Delay
Set the surround delay based on the dimensions of the auditorium. Alternatively, the
slider can be used if you know the desired delay setting.
See Section 3.2.3.
See Section 3.2.4.
See Section 3.2.5.