Installation manual

Model DMA
™
8 Installation Manual Technical Reference
5-3
5.4 Connectors
5.4.1 Rear-Panel Connector Descriptions and Types
Table 5–2 Rear-Panel Connector Descriptions and Types
Panel Label Description Type
Digital Media
Automation
Remote theatre control input (momentary contact) DB-9
Serial Data In DA10/20 interface for Auto Surround EX (input) DB-9
Serial Data to SA10 SA10 interface for Auto EX Surround EX (output) DB-9
10BASE-T Ethernet Ethernet connector for remote monitoring RJ-45
To DA Control DA20 Automation port DB-25
To CP Control Cinema processor Automation port DB-25
Analog Audio In Eight-channel analog input for external digital processor DB-25
Audio Out to CP Eight-channel analog output: L, Le, C, Re, R, Ls, Rs, Sw DB-25
S/PDIF Coax S/PDIF coax audio in RCA
S/PDIF Optical S/PDIF optical audio in Toslink
4x AES In 4 x AES/EBU input (eight-channel PCM audio) DB-25
1x AES Dolby E or Dolby Digital, AES3 BNC
AC power inlet module with filter IEC
5.4.2 Digital Media Automation Connector
Table 5–3 Digital Media Connector Pinout
Pin Function Specification
1 Digital Media mode Pulse to ground (push-button,
relay contacts, etc.)
2 Film mode Pulse to ground (push-button,
relay contacts, etc.)
3N/C
4N/C
5 Ground
6N/C
7N/C
8N/C
9 +5 VDC (current-limited) Maximum current output=20 mA