Installation manual

Model DMA
™
8 Installation Manual Technical Reference
5-6
5.4.5 Serial Ports (Front and Rear), RS-232 Connectors
Table 5–6 Serial Ports Pinout
Pin No. Connection
1 No connection
2 Data Out
3 Data In
4 Tied to pin 6
5 Chassis GND
6 Tied to pin 4
7 Tied to pin 8
8 Tied to pin 7
5.4.6 CP and DA Control Automation Connectors
Table 5–7 CP and DA Control Connectors Pinout
Pin
No.
DMA8 CP Control and
DA Control
Connectors
CP500
Automation
CP65
Automation
CP55
Automation with
Cat. No. 222
SR/A module
CP45 with
Cat. No. 545A
Automation
Board (J12)
1
(S0)
Automation select (01) Mono (01) Mono (01) Mono (01) Mono
2
(S1)
Automation select (04) Dolby
A-type
(04) Dolby
A-type
(05) Dolby SR (04) Dolby
A-type
3
(S2)
Automation select (05) Dolby SR (05) Dolby SR (04) Dolby
A-type
(05) Dolby SR
4
(S3)
Automation select (10) Dolby
Digital
(60) Non-sync /
matrix
5
(S4)
Automation select
(11) Six-channel
input
(10) Dolby Digital
(22) Magnetic
(10) Dolby
Digital
6
(S5)
Automation select (42) Magnetic
7
(S6)
Automation select (60) Non-sync 1 (60) Non-sync / std (60) Non-sync (60) Non-sync
8
(S7)
Automation select (61) Non-sync 2 (22) Magnetic
(10) Dolby
Digital
12 GND GND GND GND GND
Shaded boxes are DMA8 defaults for Digital Media format.