Inc. Home Theater System User Manual

Dolby E Multichannel Distribution System User Manual DP571 Dolby E Encoder
3-16
3.2.5 System Settings
Figure 3-9
System Settings menu
Remote control functions are not yet available for the initial Dolby E product release,
so this menu is useful only during firmware upgrades (see the next section).
3.2.6 Firmware Upgrade
Figure 3-10
Firmware Upgrade menu
The firmware in the DP571 can be upgraded via the Remote Serial port. See the docu-
mentation that accompanies the upgrade kit.
3.3 DP571 Status Mode Menu
Access the Status mode menus by pressing Shift + Setup. These menus simply display
the device’s current status and are not used to set values. Use the Setup mode menus to
set new values.
Figure 3-11
DP571 status menus
DP571 Unit Setup
System Settings
System Settings
Unit Address
System Settings
Unit Name
Remote Baud Rate
9.6 kbps
Unit Address
8280
Unit Name
Dolby E Encoder
Remote Baud Rate
38.4 kbps
Remote Baud Rate
19.2 kbps
System Settings
Remote Baud Rate
Enter
Enter
Enter
Enter
Esc
Esc
Esc
Esc
DP571 Unit Setup
Firmware Upgrade
Firmware Upgrade
ENTER=Yes ESC=No
Enter Esc
Dolby E
5.1+2 20bit
Video Ref
29.97 fps
Timecode LTC
00:00:00:00 fps
Metadata L
Internal
Ext Metadata In
ENTER to View
Firmware Version
1.00
PCM Delay
No Input
Error Stats
ENTER to View