COMBINATION FLAT COLOR TELEVISION AND DVD/VCD/CD PLAYER Owner's Manual DV2018 DV2418 Before operating the unit, please read this manual thoroughly.
Table of Contents Important Safety Instructions --------------------1 Getting Started ----------------------------------------3 Front ------------------------------------------------------3 Back-------------------------------------------------------4 Remote Control ----------------------------------------5 Installing batteries -------------------------------------6 Effective range of the Remote----------------------6 Installation----------------------------------------------7 Antenna connections -----------
Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION-These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Important Safety Instructions 15. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 16. Apparatus shall no t be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 17. If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
Getting Started Front (2) VIDEO L/MONO-AUDIO-R 1 Disc tray 2 OPEN/CLOSE 3 PLAY STOP CH CH+ VOL VOL+ MENU TV/AV TV/DVD 4 5 6 7 8 9 10 11 12 1. AV2 inputs (VIDEO, AUDIO L/MONO, R) 2. Earphone jack 3. Open/close disc tray 4. Playback 5. Stop playback 6. Channel down select; menu item select 7. Channel up select; menu item select 8. Volume down adjust; menu item adjust 9. Volume up adjust; menu item adjust 10. Display MENU of TV 11. Video input select 12.
Getting Started(continued) Back DV2418 DV2018 1 S -VIDEO 2 VIDEO 3 DIGITAL AUDIO COAXIAL L /MONO AUDIO R 4 OUT 1. AV1 inputs (S-VIDEO, VIDEO, AUDIO L/MONO, R) 2. Monitor outputs (VIDEO, AUDIO L/MONO, R) 3. Antenna input 4.
Getting Started(continued) Remote Control 1 2 3 4 5 6 1 SLEEP 5 2 TV/DVD 8 7 9 MUTE 3 +10 AV/SETUP 0 6 Cable/SAT 4 DVD COMBO TV VCR 7 SET CH DSP/OSD VOL - VOL 11 MENU 8 + /ZOOM CH STEREO/AUDIO&CH 12 9 STOP PLAY OPEN/CLOSE 10 13 14 15 16 17 18 REW/PREV SR/SF FWD/NEXT PAUSE/STEP 20 19 SEARCH RETURN 21 DVD MENU 22 23 REPEAT A-B ENTER 24 25 SUBTITLE TITLE ANGLE 26 5 1. Power on/off 2. Sleep timer 3. Switch between TV/AV and DVD 4.
Getting Started(continued) 1 Important: Your remote control has been preprogrammed. If your remote controller does not work correctly, maybe the setting is wrong, please try the following steps. 1. Press and hold the “SET ” button, followed by the “DVD COMBO ” button at the same time until the indicator lights up. 2. Press 1, 4, 7 buttons one by one. As a response, the indicator of the remote control will twinkle twice, otherwise please repeat the above 2 steps.
Installation INSTALL the unit in a room where direct light will not fall upon the screen. Tip: Total darkness or a reflection on the picture screen may cause eyestrain. For best results, soft, indirect lighting is recommended. Antenna connections OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT INCLUDED) Follow the instructions for the type of antenna system you intend to use. If using Cable or satellite, see the next page.
Installation (continued) Cable (CATV)/satellite connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some Cable TV companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambling device and is generally provided by the cable company.
Installation This TV set provides 2 groups of AV inputs (including S-VIDEO) and 1 group of MONITOR outputs for your convenient connection to VCR, Camcorder, Amplifier or other equipment. Check the Owner's Manual of the equipment to be connected as well.
Installation (continued) Connecting AV1 inputs If you connect the TV/DVD to VCR or camcorder, you can select by pressing the AV/SETUP button. Press this button repeatedly to select the desired mode. “Video 1”, “Video 2” or TV channel will display on the screen. In the DVD mode this button will not operate.
Power on/off Wider Hole and Blade AC Outlet Turning on Insert the AC plug (with the 2 blades) into a 1 conveniently located AC outlet having 120V, 60Hz. If the red indicator lights up and no picture appears, then the TV set is in STANDBY mode. Now please follow step 2.
Selecting the Video Input Watching AV program Video1 To watch video program from AV inputs, Press 1 AV/SETUP repeatedly to select the desired mode. Video1 1 SLEEP 5 4 6 TV/DVD 7 8 9 MUTE TV 10 MONO Notes: 3 2 Video2 +10 With the AV1 input terminals, the S-VIDEO terminal takes precedence to the Video 1 input. When both S-video and AV1 cables are connected, the S-video signal is automatically selected and the On-screen display is "S-Video".
Tuning To enter the TUNING menu PICTURE SOUND TIMER TUNING SET UP Channel Color system TV/Cable Add/Erase AFT Fine Auto search Move[ ] 7 AUTO TV Add On 0 Adjust[ ] 1 Press the MENU button. 2 Press VOL+ or VOL- to select TUNING icon. If the TUNING icon is not present on the menu group, the TV/DVD may be in AV mode. Press the AV/SETUP button till TV mode appears. Press MENU again and the TUNING icon should appear. 1 3 Press CH- to display the TUNING menu.
Tuning (continued) Erasing an unnecessary channel PICTURE SOUND TIMER TUNING SET UP Channel Color system TV/Cable Add/Erase AFT Fine Auto search Move[ ] 7 AUTO TV Erase On 0 Adjust[ 1 VOL+ or VOL- to select a channel number (for 2 Press example, channel10) ] CH+ or CH- repeatedly to highlight Add/Erase 3 Press item. 4 Press VOL+ or VOL- to set to Erase. 3 2 the TUNING menu, press CH+ or CH- repeatedly 1 From to highlight Channel item.
Tuning (continued) Setting the Color System PICTURE SOUND TIMER TUNING SET UP Channel Color system TV/Cable Add/Erase AFT Fine Auto search Move[ ] 7 AUTO TV Erase On 0 Adjust[ If the picture color is abnormal, maybe the color system setting is wrong. You can select a proper color system as follows. the TUNING menu, press CH+ or CH- repeatedly 1 From to highlight Color System item. ] VOL+ or VOL- to select 2 Press a proper color system. The color system switches between AUTO, NTSC358 and NTSC443.
Channel Selection TV 10 Mono 1 Use 0~9 digit buttons and the --/---/+10 button To select one-digit channel: Press one of the 0-9 digit buttons and wait for 2 seconds. To select two-digit channel: Input the channel using the digit buttons. Be sure to enter the channel within 2 seconds. To select three-digit channel: 1 3 2 SLEEP 5 4 6 Press the "--/---/+10” button to display "1--". Press two digit buttons to input the remaining two digits of the channel.
Adjusting Picture To enter the PICTURE menu PICTURE SOUND TIMER TUNING SET UP Contrast Brightness Color Sharpness Tint Picture mode More Move[ ] 100 70 70 50 00 Sports Adjust[ 1 ] Adjusting picture 3 2 SLEEP 5 4 6 TV/DVD 7 8 9 MUTE +10 AV/SETUP 0 Cable/SAT DVD COMBO TV VCR SET CH DSP/OSD VOL VOL - MENU 1 Press the MENU button. 2 Press VOL+ or VOL- to select PICTURE icon. 3 Press CH- to display the PICTURE menu. + the PICTURE menu, 1 From repeatedly to select item.
Adjusting Picture (continued) Auto search/Manual search/Channel skip/Fine tuning Setting SVM option PICTURE SOUND TIMER TUNING SET UP More SVM Blue back Noise reducer Move[ ] Off On On Adjust[ the PICTURE menu, press CH+ or CH- repeatedly 1 toFrom select SVM item. 2 Press VOL+ or VOL- button to adjust. This function helps to improve the quality of picture. You can switch between Off, Soft, Mild and Hard. ] Notes: Model DV2018 does not have the "SVM" function.
Sound Adjusting volume/Muting the Sound Adjusting volume 1 Use the VOL+ or VOL- button. Volume Press VOL+, the volume increases; Press VOL-, the volume decreases. The minimum volume is 0 and the maximum volume is 100. 50 2 Use the MUTE button. 1 If you want to mute the sound, press the MUTE button on the remote. 3 2 SLEEP 5 4 6 TV/DVD 7 8 9 MUTE +10 AV/SETUP To resume the sound, press this button again. Notes: You can also resume the sound by pressing the VOL+ or VOL- button.
Sound (Continued) Adjusting sound PICTURE SOUND TIMER TUNING SET UP Bass Treble Balance Sound mode S.woofer Move[ ] 59 69 00 Personal On Adjust[ ] the SOUND menu, press CH+ or CH- repeatedly 1 From to select item. 2 Press VOL+ or VOL- to adjust. Item VOL- VOL+ Bass Treble Minus Minus decreases the right channel Plus Plus decreases the left channel Balance 1 3 2 SLEEP 5 4 6 Selecting sound mode TV/DVD 7 8 9 MUTE +10 AV/SETUP 0 Cable/SAT select Sound Mode item.
Timer To enter the TIMER menu PICTURE SOUND TIMER TUNING SET UP Off Time Off AM 12:00 Off AM 12:00 2 TV AM 8:00 On Time Channel TV/Cable Clock Move[ ] Select[ ] 1 Press the MENU button. 2 Press VOL+ or VOL- to select TIMER icon. 3 Press CH- to display the TIMER menu. Setting Clock 1 3 2 SLEEP 5 4 6 TV/DVD 7 8 9 MUTE +10 2 Press VOL+ or VOL- button to set the current time. AV/SETUP 0 Cable/SAT the TIMER menu, press CH+ or CH- repeatedly 1 From to select CLOCK.
Timer(continued) Setting Off Time PICTURE SOUND TIMER TUNING SET UP Off Time Once 10:00PM Once 6:00PM 2 TV 8:00AM On Time Channel TV/Cable Clock Move[ ] Select[ 1 Every, this occurs every day. To cancel this function, set OFF TIME to Off. ] 3 Press CH- . Press VOL+ or VOL- to set the OFF time. The TV will 4 turn off at the designated time.
System Setup To enter the SET UP menu PICTURE SOUND TIMER TUNING SET UP Language: ENGLISH FRANCAL ESPANOL Menu Demo: Child lock menu: More Move[ ] Stop Confirm[ ] 1 Press the MENU button. 2 Press VOL+ or VOL- to select SETUP icon. 3 Press CH- to display the SETUP menu. Selecting a Language 1 3 2 SLEEP 5 4 6 the SETUP menu, press CH+ or CH- repeatedly 1 From to select an on-screen display language. TV/DVD 7 8 9 MUTE +10 AV/SETUP 0 Cable/SAT 2 Press the VOL+ to confirm.
System Setup(continued) Setting Closed Caption (CCD) PICTURE SOUND TIMER TUNING SET UP More Closed Caption Vchip password Move[ ] OFF Select[ 1 2 From the SETUP menu, press CH+ or CH- repeatedly to select Closed Caption item. Press the VOL+ or VOL- to select. You can select the caption data channel (C1/C2/C3/C4), the text service channel (T1/T2/T3/T4) or turn off Closed Captioning (Off).
Parental Control Child lock To enter Child lock submenu PICTURE SOUND TIMER TUNING SET UP Language: ENGLISH FRANCAL ESPANOL Menu Demo: Child lock menu: More Move[ ] Stop the SETUP menu, press CH+ or CH- repeatedly 1 toFrom select Child lock. Input a password for the Child 2 lock menu. PICTURE SOUND TIMER TUNING SET UP Number[0-9] The default password to enter the Child lock menu is 0000 and you can change it in the Child lock submenu.
Parental Control(Continued) Setting V-chip To enter V-chip menu PICTURE SOUND TIMER TUNING SET UP MPAA RATING TV PARENTAL GUIDELINES CANADIAN ENGLISH RATING CANADIAN FRENCH RATING BLOCK ON NEW PASSWORD Move[ ] Select[ ] V-Chip enables parents to prevent their children from watching inappropriate material on TV.
Parental Control Setting V-chip TV RATING SET-UP PICTURE SOUND TIMER TUNING SET UP NONE TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA CONTENT Move[ F ] V S L Select[ 1 D ] 3 2 SLEEP 5 4 6 TV/DVD 7 8 9 MUTE +10 AV/SETUP 0 TV Parental Guidelines may have one or more letters added to the basic rating to let parents know when a show contains higher levels of violence, sex, adult language or suggestive dialogue: 1 From the V-chip submenu, press CH+ or CH- repeatedly to select TV PARENTAL GUIDELINE
Parental Control(Continued) Setting V-chip Setting individual Content Categories for TV Rating PICTURE SOUND TIMER TUNING SET UP CONTENT TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA FANTASY V VIOLENCE SEXUAL LANGUAGE DIALOG Move[ ] VIEW --------- Select[ 1 SLEEP 5 4 6 TV/DVD 7 8 9 MUTE +10 AV/SETUP 0 Cable/SAT NONE TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA CONTENT Move[ ] F V S L Select[ ] D 3 Press CH + or CH- repeatedly to select a TV Rating. 4 Press VOL + to enter the content categories menu.
Parental Control(continued) Setting V-chip CANADIAN FRENCH RATING SET-UP PICTURE SOUND TIMER TUNING SET UP E G 8 ans+ 13 ans+ 16 ans+ 18 ans+ Move[ ] From the V-CHIP submenu, 1 press CH+ or CH- repeatedly to select CANADIAN FRENCH RATING. Select[ ] VOL+ or VOL- to enter 2 Press the CANADIAN FRENCH MPAA RATING TV PARENTAL GUIDELINES CANADIAN ENGLISH RATING CANADIAN FRENCH RATING BLOCK ON New password Move[ ] Select[ ] RATING sub-menu.
DVD Operation Guide
Disc Information Discs that can be played This TV/DVD supports DVD, SVCD, VCD, CD-DA, HDCD, KODAK picture CD and CD-R/RW including discs containing MP3 files. Please do not play any disc other than the above formats. This unit detects the disc loaded and automatically sets the mode. Discs that can not be played Do not play DVD-Audio, DVD-ROM, DVD-RAM, CD-G, CDV, CVD, DVD-RW, CVD, SACDand Divx Video Discs. This unit may not be able to play some CD-R/RW due to the condition of the recording.
Basic Playback Preparation 1 2 3 4 5 6 Insert the AC cord plug into the specified polarized AC outlet. Press POWER to turn on the unit. When using an amplifier, switch on the amplifier. SLEEP Start Playback TV/DVD 7 8 9 MUTE +10 1 Press TV/DVD to select the DVD mode. “LOADING” changes to “NO DISC”. (If a DVD disc has already been loaded, the playback will start automatically) 2 Press OPEN/CLOSE to open the disc tray. 3 Place a disc onto the tray.
Basic Playback Quickly select Chapter or Track You can quickly select chapter or track by using number buttons. 1 2 3 4 5 6 SLEEP Note ! TV/DVD 7 8 Some Video-CDs have a PBC feature. When the PBC is ON, you cannot select a track during playback by pressing the number buttons.
Using On-screen Menu Using a TITLE MENU [DVD] 1 2 3 4 5 6 SLEEP TV/DVD 7 8 1 +10 AV/SETUP 0 Press TITLE during playback. TITLE MENU A list of the titles on the disc is now displayed. 9 MUTE Cable/SAT Some movie discs may have two or more titles. If the disc has a title menu recorded on it, the TITLE button can be used to select this menu. (The details of operation depend on the disc used.) Note If the disc contains only one movie, the unit plays from the beginning of the disc.
Locating Desired Scene Locating desired scene [DVD] 1 2 3 4 5 6 You can use the title, chapter and time recorded on the disc to locate a desired point to play back. SLEEP 1 Press this button once and the unit allows you to select title or chapter with the number buttons. You can toggle TITLE and CHAPTER with 3or4. TV/DVD 7 8 9 MUTE +10 AV/SETUP 0 2 Cable/SAT DVD COMBO TV Press SEARCH during playback.
Displaying Status of Disc 1 2 3 4 5 6 SLEEP [DVD] DVD TV/DVD 7 8 9 MUTE The status of disc can be displayed by pressing DSP/OSD repeatedly. The information displayed on the screen is different according to the type of disc you are playing back. Each press of this button displays the following: +10 There are 2 titles in the disc and title 1 is now playing. AV/SETUP TT 01/02 CHAPTER 02/16 The elapsed time of current title. 1:21:29 The remaining time of current title.
Special Functions Zooming 1 2 3 4 5 6 7 8 9 SLEEP When you play DVD or VCD, this unit allows you to zoom in or zoom out during playback. Each press of the /ZOOM button, the unit operates as: 2X TV/DVD MUTE 2X +10 1 2 1 3 Normal 1 4 When you zoom in the frame image, you can make selections by switching the position of the frame by using 3/4or 5/6.
Special Functions Changing Angles [DVD] 1 2 3 4 5 6 7 8 9 SLEEP TV/DVD MUTE +10 Some DVDs contain scenes which have been shot simultaneously from a number of different angles. For these discs, the same scene can be viewed from these different angles with the ANGLE button. (This feature depends upon inclusion on the disc) 1 The current angle will appear. AV/SETUP 0 Press ANGLE during playback. 2 Press ANGLE repeatedly until the desired angle is selected.
Initial Settings 1 2 3 4 5 6 7 8 9 SLEEP Once the initial settings have been completed, the player can always be operated under the same conditions (especially DVDs). The settings will be retained in the memory even after switching to standby mode. GENERAL SETUP TV/DVD MUTE Accessing GENERAL SETUP page +10 AV/SETUP 0 Cable/SAT DVD COMBO TV VCR = GENERAL SETUP AUDIO SETUP VIDEO SETUP PREFERENCE SETUP EXIT SETUP Now you can start GENERAL SETUP.
Initial Settings GENERAL SETUP (continued) 1 3 2 4. Setting OSD LANGUAGE SLEEP 4 5 6 7 8 9 TV/DVD MUTE +10 AV/SETUP 0 Cable/SAT DVD COMBO TV VCR SET TV TYPE TV DISPLAY ANGLE MARK OSD LANG CAPTIONS SCREEN SAVER LAST MEMORY ENGLISH FRENCH SPANISH VOL VOL + /ZOOM CH STOP PLAY 5. Setting the CAPTION feature Press5or6to select CAPTIONS item. =Press 4 to access option item. =Press5or6to select option item. =Press ENTER to confirm and press 3to return.
Initial Settings AUDIO SETUP 1 3 2 Accessing AUDIO SETUP page SLEEP 4 5 6 7 8 9 TV/DVD MUTE +10 AV/SETUP 0 AUDIO SETUP PAGE Press AV/SETUP to display initial setup menu. =Press5or6to select AUDIO SETUP item. =Press ENTER. = SPEAKER SETUP SPDIF SETUP HDCD MAIN PAGE Now you can start AUDIO SETUP. 1.
Initial Settings AUDIO SETUP (continued) 1 3 2 3. Setting HDCD SLEEP 5 4 6 TV/DVD 7 8 9 MUTE +10 AV/SETUP 0 Cable/SAT DVD COMBO TV VCR DSP/OSD VOL VOL MENU + /ZOOM REW/PREV STOP SR/SF PLAY OFF ON AUDIO SETUP Accessing VIDEO SETUP page OPEN/CLOSE VIDEO SETUP PAGE Press AV/SETUP to display initial setup menu. =Press5or6to select VIDEO SETUP item. =Press ENTER. SHARPNESS BRIGHTNESS CONTRAST LUMA DELAY Now you can start VIDEO SETUP.
Initial Settings VIDEO SETUP (continued) 1 2 3 4 5 6 4. Setting LUMA DELAY item SLEEP 8 9 MUTE +10 AV/SETUP 0 Cable/SAT In most cases, "1T" is recommended when playing DVD material. "0T" is recommended when playing other material. DVD COMBO TV VCR SET CH DSP/OSD VOL VOL - MENU + CH STOP PLAY OPEN/CLOSE SHARPNESS BRIGHTNESS CONTRAST LUMA DELAY MAIN PAGE Accessing PREFERENCE SETUP page Press AV/SETUP to display initial setup menu. =Press5or6to select PREFERENCE SETUP item.
Initial Settings PREFERENCE SETUP (continued) 1 2 3 4 5 6 7 8 9 4. Setting Parental lock level SLEEP TV/DVD MUTE DVD COMBO TV AV/SETUP VCR SET CH DSP/OSD VOL VOL - MENU + /ZOOM CH STEREO/AUDIO&CH Press5or6to select PARENTAL item. Press 4 to access option item. =Press5or6to select a desired rating. =Press ENTER to confirm. = +10 0 Cable/SAT This is to disable the playing of some DVDs which are unsuitable for some audiences, for example, children.
Playing Back MP3 disc 1 2 3 4 5 6 This unit is able to playback discs recorded with MP3 files. When a MP3 disc is loaded, a file menu screen displays. SLEEP TV/DVD 7 8 9 MUTE +10 AV/SETUP 0 Cable/SAT DVD COMBO TV VCR SET CH DSP/OSD VOL VOL - MENU + /ZOOM CH STEREO/AUDIO&CH REW/PREV STOP SR/SF PLAY OPEN/CLOSE FWD/NEXT PAUSE/STEP SEARCH MENU = FOLDER1 FOLDER2 FOLDER3 FOLDER4 FOLDER5 FOLDER6 = PLAY MODE Note This menu screen is for illustration only.
Playing Back MP3 disc PLAY MODE selection 1 2 3 4 5 6 SLEEP You need to stop playback before selecting a play mode. =Press STOP to stop playback. =Press4to toggle MP3track and PLAY MODE - or - TV/DVD 7 8 9 MUTE +10 AV/SETUP 0 Cable/SAT DVD COMBO TV VCR SET CH DSP/OSD VOL VOL - MENU + /ZOOM REW/PREV STOP SR/SF PLAY OPEN/CLOSE FWD/NEXT PAUSE/STEP SEARCH RETURN DVD MENU REPEAT A-B SUBTITLE 1.
Playing Back Kodak Picture CD This unit is able to playback Kodak picture CDs. 1 2 3 4 5 6 Supported formats: SLEEP = TV/DVD 7 8 9 MUTE File system: ISO9660, Joliet. File extension: JPEG files. =Max. picture size: 3072 x 3072 pixels = +10 AV/SETUP 0 MENU FOLDER1 FOLDER2 FOLDER3 FOLDER4 FOLDER5 FOLDER6 PLAY MODE FOLDER When a Kodak picture CD is loaded, a menu screen displays. Note This menu screen is for illustration only.
Playing Back Kodak Picture CD Setting picture transition effects 1 2 3 4 5 6 7 8 9 SLEEP The transition effects is applied at the moment when the current slide image is replaced by the next slide image. This unit provides 17 kinds of transition effects. You can select the transition effect by pressing ANGLE during slide playback.
Setting the Universal Remote Control Unit Your Universal Remote Control has been preprogrammed to operate your TV (just press the TV button). You may also program the Universal Remote Control to operate other devices. 1. HOW TO SET THE UNIT Locate the correct code for the Brand/Model of the device you wish to control from the attached code list. 1 2 3 Press and hold the SET key and then press the key that corresponds to the device you wish to control (TV, VCR, Cable/SAT, or DVD/VCD/HIFI).
Setting the Universal Remote Control Unit 7.
Setting the Universal Remote Control Unit DVD/VCD/HIFI codes 51 ADVENT 147 AIWA 021 AKAI 145 ALCO 145 BLUEHOUSE 123 DENON 018 061 062 107 108 121 DMTECH 050 096 122 123 124 125 FISHER 143 GRUNDIG 016 050 126 127 128 129 130 131 132 241 242 243 244 245 NORDMENDE 144 267 268 269 270 271 272 ONKYO 022 067 069 113 115 134 135 187 188 OPTIMUS 004 181 182 183 184 185 186 ORION 042 044 059 088 090 105 120 180 PANASONIC 002 018 019 020 052 061 098 107 133 189 190 191 192 193 194 PHILIP
Setting the Universal Remote Control Unit CABLE/SATELLITE codes ALPHASTIR 097 AMSTRAD 029 030 031 032 065 066 067 068 092 GRUNDIG HAMLIN KARDON 033 069 119 120 121 202 203 204 PRIMESTAR 025 PROSCAN 131 008 012 015 061 129 205 QUICK ORAW 123 266 267 268 269 RADIO SHACK 114 124 RAMSEY 122 RCA 009 010 021 062 063 094 131 270 REALISTIC 129 REGAL 008 012 015 061 AMWAY 098 059 097 098 099 140 141 142 143 HEME CABLE ATLANTA HITACHI 105 210 211 212 213 ATRANTA 055 094 095 096 136 137 1
Setting the Universal Remote Control Unit VCR codes ADMIRAL 024 DYNATECH 138 139 ADVENT 138 139 ELBE 100 185 186 187 188 189 ADVENTURE 138139 ELECTROHOME 032 177 AIKO 138 ELECTROPHONIC 032 AIWA 111 114 136 025 031 051 085 096 138 139 140 141 184 EMERSON 032 037 056 138 139 140 141 156 158 162 173 174 176 177 184 186 191 003 026 029 030 089 090 098 099 101 108 132 137 139 142 175 177 185 186 187 188 FERGUSON 104 190 191 192 193 194 AKAI FISHER 035 074 095 103 142 147 154 180 195 196
Setting the Universal Remote Control Unit VCR codes MAGNIN 041 RICOH 002 RRADIO 109 MARANTZ 014 035 074 121 144 174 180 189 242 243 244 245 246 SAMSUNG 039 037 040 041 045 057 149 152 155 185 256 257 258 SANSUI 175 181 SANYO 035 036 041 067 068 134 147 259 260 261 MARDS 173 MARTA 032 MASUSHITA 173 174 MATSUI 056 057 234 235 236 237 MEI 173 174 SCOTT 141 156 176 191 MEMGREX 024 032 035 041 138 139 147 173 174 185 SEARS 032 035 142 147 149 150 154 173 174 MGA 176 177 SHARP 024
Troubleshooting Guide Check the following before requesting service. SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION The AC power cord is not connected. Connect the AC power cord to the AC outlet TV station experiencing problems. Try another channel. Picture control is not adjusted. Check picture control adjustments. Possible local interference. Check for source of reception disturbance. Power No power TV broadcast reception Poor or no picture. Antenna/Cable connector is not connected.
Troubleshooting Guide SYMPTOM POSSIBLE SOLUTIONS DVD Playback does not start No disc is inserted. The disc may be dirty. Clean up the disc. =The disc is badly distorted. No picture = No sound Check the input selector of the amplifier is set properly. The unit is in the Special playback mode. =Select the correct Audio Output position on AV amplifier. Picture is distorted during REVIEW. = Stopping playback, search, slowmotion play or repeat play, etc. cannot be performed.
Reception Disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results if not using cable or a satellite. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local cable company broadcast.
Specifications Power Supply: AC 120V, 60Hz AC 120V, 60Hz Power Consumption: 120W 150W Dimensions: 23.2(W)r19.5(H)r18.5(D) inch 26.9(W)r21.9(H)r18.9(D) inch Weight(kg/lb): 27 kg/60 lb 40 kg/88 lb CRT: 20" SCREEN 24" SCREEN Audio Output: 2.5Wr2 3Wr2 TELEVISION Color System: TV: NTSC-M AV: NTSC 3.58/4.43, PAL 4.
