D VD-Receiver Player User Guide Before attempting to connect, operate or adjust this product, please save and read this manual completely.
FCC and Safety Information CAUTION: This unit employs a laser. Due to possible eye injury, only qualified service personnel should remove the cover or attempt to service this device. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and disc can have an optional region code.
Important Safety Instruction 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a damp cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus including amplifiers) that produce heat.
Please read these precautions before operating this unit. ! Power cord protection To avoid any malfunctions of the unit, and to protect against electric shock, fire or personal injury, please observe the following. " Hold the plug firmly when connecting or disconnecting the AC power cord. " Keep the AC power cord away from heating appliances. " Never put any heavy object on the AC power cord. " Do not attempt to repair or reconstruct the AC power cord in any way.
Dear Customers May we take this opportunity to thank you for purchasing this DVD player. We strongly suggest that you carefully study the Operating Instructions before attempting to operate the unit and that you note the listed precautions. Playing Repeatedly ..................................................................... 13 Repeat Sections Between Two Specific Points (A-B Repeat) ... 13 Programming Audio CDs ............................... 14 Playing MP3 Music Discs ..............................
DVD Playback DVD Playback - continued Preparations Stopping Playback and Returning to The Menu Screen (If a Menu Screen Is Available on The Disc) to a stereo system. Basic Playback 1 2 Press POWER on. After operation The power LED is green on. When the DVD player is not in use, remove the disc and press POWER to turn off the player. Press EJECT to open the disc tray. NOTE: ! The disc continues to rotate while the menu is displayed even after the player has finished playing a particular disc.
DVD Playback - continued Stopping Playback DVD Playback - continued Still Picture (PAUSE) Press STOP button on the remote. Press PAUSE/STEP once during playback. Note: If you want to power off the unit, press the STOP button on remote first, and then the POWER on the unit. The screen is paused and “ “ appears on the TV screen. To return to normal playback Rapid Advance (Rapid Reverse) By the remote control: Press (F. BWD) or playback. (F.
Direct Selection of Scenes- continued Selecting Scenes by Title/Chapter Number Allows you to locate specific titles of scenes to playback. 1 2 Press SEARCH during playback. Press / to move the cursor to the title and chapter input blanks. Selecting Scenes by Time Example: Viewing a disc from a specific time; for example, 1 hour and 50 minutes. 1 Press SEARCH during playback. 2 Press / to move the cursor to the time input blanks. 3 Press the number button(s) to specify the starting time point.
Repeat Playback Playing Repeatedly Press 1/ALL REPEAT during playback. Each time you press the button, the disc will repeat a chapter, a title, or repeat Off. Convenient Functions Displaying the Information of the Scene Displaying the Information of the Scene 1 Press INFO. during playback. Press once : Repeat Chapter Press INFO.
Convenient Functions - continued Convenient Functions - continued Changing Audio Soundtrack Language You can change the audio language from the one selected at the initial settings to a different language, if available. (This operation functions only with discs on which multiple audio soundtrack languages are recorded.) 2 If a disc provides subtitles, you can choose to hide or display them. (This operation works only with discs that provide subtitles.
Convenient Functions - continued Convenient Functions - continued Viewing From Another Angle Some DVD discs may contain scenes which have been shot simultaneously from a number of different angles. For these discs, the same scenes can be viewed from each of these different angles using the ANGLE “ ” button. (The recorded angles may look different from disc to disc) 1 Press ANGLE during playback. 2 Press ANGLE repeatedly until the possible viewing angle is selected.
Convenient Functions - continued Setting Speaker Sound Balance Adjusting Video Picture You can adjust video brightness and sharpen the edges using TV SYS. button. You can manually adjust the sound balance on all of the speakers, or individual speakers connected to the DVD player. Therefore, you can enjoy a best possible home theater surround sound. 1 Press PICTURE during playback. 1 2 Press / / / to select the “Brightness” and “Edges”.
Video CD Playback Video CD Playback - continued Preparations Entering other menu screen ! Press on the power button of the TV set, and select “Video” After step 4, press as the TV input. ! Press on the power button of the stereo system if the player has been connected to a stereo system. ! To return to the previous menu screen press Basic Playback 1 2 Stopping playback and returning to the menu screen Press STOP twice and press PLAY. ! PLAY suspends, and the menu screen appears.
Locating a Specific Track This feature allows you to quickly locate a specific track to playback. 1 2 Press PBC repeatedly in stop mode until “PBC OFF” appears on TV screen. Press TITLE. A track menu containing a number of small video clips appears on TV screen. 3 Press number button(s) to select the possible item to playback. If the clips in the track menu are assigned a number, you can directly locate a specific track by pressing number buttons with the remote. 4 Press PLAY.
Video CD Playback - continued Video CD Playback - continued Pause Play Setting Audio Sound Effect Press PAUSE once during playback. This feature only works on video discs, and audio discs. The screen is paused and “ “ appears on TV display. To return to normal playback Press PLAY. You can output the sound with an acoustical effect as Standard, Classical, Rock, Jazz, Pop, and User (manually settings). 1 Press EQ (Equalizer). Press STEP twice during playback.
Repeat Playback Playing Repeatedly Audio CD Playback Preparations ! Power on the TV set, and then select “Video” as the TV input. ! Power on the stereo system if the player has been connected Press 1/ALL REPEAT during playback. to a stereo system. Each time you press the button, the selection changes and the disc will repeat a track or the entire disc.
Audio CD Playback - continued Audio CD Playback - continued Stopping Playback Programming Audio CD Soundtrack Press STOP. You can program soundtracks to play back in your favorite order. Rapid Advance (Rapid Reverse) 1 Press STOP. 2 Press PROGRAM. By the remote control: Press (Rapid Advance) or Reverse) down during playback. (Rapid ! Normal play is resumed when you play PLAY. ! The speed of forward (i.e. 2) or reverse (i.e. You will see the below list displayed on screen after step 2.
Audio CD Playback - continued Shuffle Play You can play back chapters or tracks in a random order. The “Shuffle Play” order may be in a different order each time you play. 1 Press SHUFFLE Press the button repeatedly until “SHUFFLE ON” appears on screen. The shuffle play will start in few seconds. NOTE: ! The Shuffle Play will stop playback automatically after all of tracks have been played once. ! Some DVDs may not perform “Shuffle Play” function.
Radio Operation Radio Operation To Recall a Stored Station AM/FM Tuning 1 1 Press POWER on. Press FUNCTION button. Press FUNCTION button repeatedly until “FM” or “AM” appears in the DVD display. 3 2 Press FUNCTION button to tuner. 3 Press the -PRESET + ( or ) buttons to select the desired station among stored stations. Press BAND button. Press the BAND button to select a possible frequency band. (FM or AM) 4 Press the -Tuning + ( or ) buttons to tune into the desired station.
Radio Operation RDS Tuning Press POWER on. The power LED is green on. 2 Press FUNCTION button. Press FUNCTION button repeatedly until “AM/FM” appears in the DVD display. 3 Press BAND button. Press the BAND button to select a possible FM frequency band. 4 Press the -Tuning + ( or ) buttons to tune into the desired FM station with RDS service. When a RDS station is tuned in, you will see RDS appears on the radio display.
LANGUAGE SETUP LANGUAGE SETUP- continued On-Screen Display (OSD) Language Setting SUBTITLE [DVD] On-screen display provides the information about a disc and its operational status on the TV screen. This feature allows you to set various languages for the on-screen display (OSD). You can select a possible subtitle language among various languages that has been recorded on discs. 1 Press SETUP in the stop mode. 1 Press SETUP in the stop mode. 2 Press / to select “LANGUAGE SETUP” then press ENTER.
LANGUAGE SETUP- continued LANGUAGE SETUP- continued AUDIO [DVD] You can select a possible soundtrack language among various languages that has been recorded on DVD discs. 1 Press the SETUP in the stop mode. 2 Press / to select “LANGUAGE” then press ENTER. DVD MENU You can select a possible language among various languages to display the disc menu messages that have been recorded on DVD discs. 1 Press SETUP in the stop mode. 2 Press / to select “LANGUAGE” and press ENTER.
SCREEN SETUP SCREEN SETUP- continued TV SYSTEM TV Shape According to the TV set connected to the player you can set your TV display size to 4:3 Pan Scan or 4:3 Letter Box or 16:9 for a wide-screen TV. 1 Press SETUP in the stop mode. 2 Press / to select “VIDEO” and press ENTER. 3 Press / to select “TV Shape” then press ENTER. 4 Press / to select a possible TV display. 4:3 PS Select 4:3 PS for a conventional size TV set.
SCREEN SETUP- continued Audio [DVD] The DVD players provides various types of audio output to set on and that include 2-channel digital stereo sound, and Dolby Digital 5.1/DTS digital surround sound. More Audio [DVD] You can obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. 1 Press SETUP in the stop mode. 1 Press SETUP in the stop mode.
CUSTOM SETUP Password [DVD] A viewer rating lock enables you to lock the DVD video discs that contain violent scenes which is not suitable for children to view. 1 Press SETUP in the stop mode. 2 Press / to select “RATING” and press ENTER. 3 4 Press / to select “Password”and press ENTER. Enter a 4-digit password and press ENTER. Factory pre-set password : 9999 ! you need to enter “9999” to set the rating for the first ! time when purchasing your DVD from the store.
Troubleshooting Before requesting service for the DVD player, check the chart below for a possible cause of the problem you are experiencing. Some simple checkups or a minor adjustment on your part may eliminate the problem and restore proper operation. SYMPTOM (COMMON) REMEDY No power. • Insert the power plug securely into the power outlet. • Check if the ON/OFF button on the front of the player is set to on. • Check if no power at the AC outlet by plugging in another appliance for a test.
Troubleshooting- continued SYMPTOM [DVD] • Subtitles appear only with discs that contain them. • Subtitles are hidden from the TV screen. Press SUBTITLE to display the subtitles. Alternative audio soundtrack (or subtitle) languages cannot be selected. • An alternative language can not be selected may result of no more than one language available. Angle cannot change. • This function depends on software availability.
Disc Handling and Maintenance (A) Handling Precautions ! Hold the disc by the edges so the surface will not be soiled ! ! ! ! ! ! with fingerprints. (A) Fingerprints, dirt and scratches can cause skipping and distortion. Do not write on the label side with a ball-point pen or other writing utensils. Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. Be careful not to drop or bend the disc. Do not install more than 1 disc on the disc tray.
Definition of Terms Angle Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.). With such discs, the ANGLE button can be used to view the scene from different angles. Chapter Number These numbers are recorded on DVD discs.
