Installation Guide

DOLCECLIMA AIR PRO
ENGLISH
EN - 19
c. In this mode it is not possible to select either the fan speed and the temperature.
d. Toswitcho󰀨thefunction,presskey“MODE”onthecontrolpanelorswitcho󰀨theappliance.
3.8 DEHUMIDIFICATION MODE (DRY)
a. Whenthismodeisselected,theappliancedehumidiestheenvironment.
This mode can be selected by pressing the key “MODE” once or more (on the remote control or on the
controlpanel)untilwhenthespeciciconappears:
- on the control panel - on the remote control display.
b. In DRY mode, it is not possible to select the fan speed or to adjust temperature.
The fan motor works at low speed.
c. Keepdoorsandwindowsclosedtoachievethebestdehumidifyinge󰀨ect.
Do not place the air outlet pipe out of a window.
d. Connect the condensation discharge pipe (paragraph 2.6.a)
3.9 VENTILATION MODE (FAN)
a. Whenthismodeisselected,theappliancedoesn’tperform any action both on temperature or on air
humidity in the environment, but only maintains it in circulation.
b. This mode can be selected by pressing the key “MODE” once or more (on the remote control or on the
controlpanel)untilwhenthespeciciconisshownonthedisplayofthecontrolpaneland/oroftheremote
control.
-
icon on the control panel - icon on the remote control display
c. In this mode, the fan is always switched on and it is possible to select its desired speed by pressing the
key “FAN” on the remote control or the key
on the control panel.
d. The fan speed is displayed as indicated in paragraphs “3.1” (point SW7) and “3.2” (point D7).
3.10 HEATING MODE (HEAT)
(only for version with heat pump)
a. When this mode is selected, the appliance heats the environment.
b. This mode can be selected by pressing the key “MODE” once or more (on the remote control or on the
controlpanel)untilwhenthespecicicon is shown on the display.
c. In this mode, the fan is always switched on and it is possible to select its desired speed by pressing the
key “FAN” on the remote control or the key
on the control panel.
The fan speed is displayed as indicated in paragraphs “3.1” (point SW7) and “3.2” (point D7).
d. The temperature set-point is included between 17°C and 30°C (from 62 F and 86 F) with 1°C variations
anditcanbesetusingthekeys+/-onthecontrolpanelorwiththekeys▲▼ontheremotecontrol.
e. After a certain time (maximum three minutes) after the activation of the operation mode, the heat pump
activates and the appliance starts delivering warm air.
f. Connect the condensation discharge pipe (paragraph 2.6.b)