Service manual

15
DOLMAR GmbH
4
3
1
2
08-01 Removing and replacing the
bracket handle
To dismantle the front handle, the strut (1)
with 3 screws and the foot (2) with 2 screws
must be unscrewed.
08-03 Replacing the vibration absorber
The system consists of 4 vibration absorb-
ers, 3 of which are on the clutch side.
To dismantle them, the front handle, filter
system and tank must be removed.
08-03 Replacing the vibration absorbers
The fourth vibration absorber is on the
magnet side.
To dismantle it, the starter device must be
removed.
08-03 Replacing the vibration absorbers
The vibration absorbers are slotted into the
housing. Mount the sleeves (3+4) with the
collars inwards.
Grease vibration absorbers (980.007.100).
08 Front handle with stand / vibration damping system