Service manual

19
DOLMAR GmbH
12-03 Testing the carburetor
Test carburetor at 0.5 bar.
12-04 Tightening the screw connections
with a torque wrench
Fix the cylinder, crankcase and muffler
screws, plus flywheel nut and clutch hub with
the specified torque (see page 22).
12-02 Testing the ignition system
To test the ignition system / spark plug, use
test device no. 965 010 030.
12-03 Testing the carburetor
To test the carburetor in the installed state,
pull fuel line out off the fuel tank. Pull off the
fuel filter and attach pressure test device no.
965 004 000 to fuel line by using a connecting
nipple.
12 Testing