Service manual

8
DOLMAR GmbH
3
4
1
2a
2
04 Ignition system
04-03 Removing the ignition/ short circuit
cable
Unscrew the starter device that is fixed with 4
screws.
04-03 Removing the ignition/ short circuit
cable
Unscrew filter hood (07-03).
Remove ignition and short circuit cable from
the guide (1) of the hood.
04-03 Removing the ignition/ short circuit
cable
Unscrew ignition from the ignition armature.
Loosen short circuit cable from the socket
connection (arrow).
04-03 Removing the ignition/ short circuit
cable
Remove hood - to do this, unscrew the 3
screws (2).
The screw (2a) is also the fixing for the earth
cable.
04-03 Removing the ignition/ short circuit
cable
Loosen the locking device of the intake elbow
from the tank housing. To do this, push both
levers inwards (arrow) and lift the intake
elbow slightly.
04-03 Removing the ignition/ short circuit
cable
Loosen the hose clamp (3) of the intake hose.
Pull the suction hose (4) off the cylinder.