User`s guide

Dolphin® 9500 Series User’s Guide Rev A
5/15/07
7 - 7
Sending Information
To send or receive, the IrDA ports of both devices - whether it’s two terminals, or a terminal and a host device - must be aligned
with each other and within a close range. The maximum data-transfer speed is 115 Kbps.
1. Align the IrDA ports.
2. Open the program where you created the item you want to send and locate the item in the list.
You can also beam files, but not folders, from File Explorer.
3. Tap and hold the item. A pop-up menu appears.
4. Select Beam File on the pop-up menu. The information begins transmitting to the other device.
Receiving Information
1. Align the IrDA ports.
2. Have the owner of the other device send the information to you.
3. Your terminal automatically begins receiving it.
Troubleshooting
If the Beam Settings are not set to receive or you’ve aligned two IrDA ports and the terminal is still not receiving, tap Start >
Settings > Connections tab > Beam . The terminal searches for the sending device.
If the terminal cannot find the sending device, the following message appears: