Specifications

Dolphin® 9500 Series Mobile Computers Quick Start Guide 7
Initialize the Mobile Computer
1. Power on the device. The decode LED lights and the scan LED blinks for
approximately three seconds. Do NOT press any keys while the terminal is
booting up.
2. The terminal initializes and the splash screen displays for a few seconds. The
Build numbers indicate the software version number.
3. The system performs a hard reset. When the display activates again, follow
the instructions that appear.
4. You are prompted to align the screen by tapping the target five times. Use
the stylus provided by Hand Held Products.
• Alignment should always be performed with a stylus designed for touch
screen applications. The small point is required for accurate calibration.
7.XX 7.XX 7.XX
Bootloader Kernel Keyboard