Instructions

6
Robotic Pool Cleaner MCC6/MTC6 | User Instructions
5.2. Putting the Pool Cleaner into the pool
H#$%&'( )*+ ,##$ -$+.'+/ 012&%+ %#3' &'
)*+ 3.)+/ (+')$t /#o4 &) 5.o4 .'% 6#/)* 3 &)*
your fingers holding the plastic doors on
the bottom lid open to release trapped
air. Continue until no more bubbles are
released.
If your Pool Cleaner is equipped with brushes that
contain sponges, dip the brushes in the water and
squeeze them so that they will absorb water the first time
you use the Pool Cleaner, or if the brushes have dried out
between uses.
Release the Pool Cleaner and let it sink to the floor of the
pool.
Make sure that the floating cable is free of any
obstructions.
To avoid kinks in the floating cable, place approximately
enough cable in the water for the Pool Cleaner to reach
the farthest corner of the pool.
Turn the power supply ON.
The Pool Cleaner will now operate until it has
reached the end of the cleaning cycle.
ON