Specifications

MC55 AT Command Set
12.20 AT+FPHCTO
s
MC55_ATC_V03.03 Page 307 of 459 9/9/05
Confidential / Released
12.20 AT+FPHCTO DTE Phase C Response Timeout
The timeout value <tout> determines how long the DCE will wait for a command after reaching the end of data
when transmitting in Phase C. When timeout is reached, the DCE assumes that there are no more pages or doc-
uments to send.
Syntax
Parameter Description
Timeout
Value in 100ms units
0...30
(P)
...255
Note
• Used for Fax Class 2 only.
Read Command
AT+FPHCTO?
Response(s)
<tout>
OK
Write Command
AT+FPHCTO=<tout>
Response(s)
OK
If error is related to ME functionality
ERROR
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
EIA PN-2388 ! % ! % ! ! ! ! !
<tout>
(num)