Specifications

MC55 AT Command Set
20.8 Alphabetical List of AT Commands
s
MC55_ATC_V03.03 Page 459 of 459 9/9/05
Confidential / Released
ATD><str> Mobile originated call from active memory using corre-
sponding field
Section 7.6, page 132
ATDI Mobile originated call to ISDN number Section 7.7, page 133
ATDL Redial last number used Section 7.8, page 134
ATE Enable command echo Section 4.5, page 87
ATH Disconnect existing connection Section 7.9, page 135
ATH Manual rejection of a network request for PDP context
activation
Section 11.18, page 281
ATI Display product identification information Section 6.1, page 119
ATL Set monitor speaker loudness Section 17.2, page 387
ATM Set monitor speaker mode Section 17.3, page 387
ATO Switch from command mode to data mode / PPP online
mode
Section 7.16, page 142
ATP Select pulse dialing Section 7.28, page 160
ATQ Set result code presentation mode Section 2.4, page 32
ATS0 Set number of rings before automatically answering a call Section 7.11, page 137
ATS0 Automatic response to a network request for PDP context
activation
Section 11.19, page 282
ATS10 Set disconnect delay after indicating the absence of data
carrier
Section 7.15, page 141
ATS18 Extended call release report Section 3.5, page 79
ATS3 Set command line termination character Section 19.2, page 425
ATS4 Set response formatting character Section 19.3, page 426
ATS5 Write command line editing character Section 19.4, page 427
ATS6 Set pause before blind dialing Section 7.12, page 138
ATS7 Set number of seconds to wait for connection completion Section 7.13, page 139
ATS8 Set number of seconds to wait for comma dialing modifier Section 7.14, page 140
ATT Select tone dialing Section 7.29, page 160
ATV Set result code format mode Section 2.5, page 33
ATX Set CONNECT result code format and call monitoring Section 2.6, page 34
ATZ Set all current parameters to user defined profile Section 2.7, page 35
AT Command Description Section and Page