Operating instructions

- 14 -

2. Slide the shelf to the left until bushings disen-

gage, then tilt the shelf to one side at an angle

while pulling forward.

3. Reposition the shelf in the desired location. Insert

the ends of the wire shelf on the left-hand side

and slide the shelf into the holes on the right-

hand side.

4. Slide the plastic plugs into the holes of the wall.

5. Snap the shelf locks back onto the wire shelf.

REMOVING AND REPLACING THE

SHELVES

1. Remove the shelf locks by inserting the tip of a

at bladed screwdriver into the slot of the locks.

Turn the screwdriver counterclockwise and then

remove the shelf locks from the wire shelf.

STORAGE COMPARTMENTS

SHELVES

USING THE SHELF GUARDS

To prevent food product containers from shifting, two slid-

ing retainer bars are mounted on the shelves. These can

be employed to separate the shelf into smaller sections

which will hold the contents in place. Slide the shelf guards

snugly against food item(s). The “front to back” shelf guard

must be in upright position.

LOCKING THE SHELVES IN UPRIGHT

POSITION

It is possible to arrange the shelves in many ways to t

your needs. To gain more space, a shelf can be removed

and locked into an upright position at the rear of the refrig-

erator compartment. Remove the shelf locks as described

in step 1 of “Removing And Replacing The Shelves”. Tilt

the shelf (A) and secure with the shelf locks (B).

GUARDS IN UPRIGHT POSITION

SHELF LOCK