Operating instructions

- 7 -
REFRIGERATOR OVERVIEW
CONTROL PANEL
1. ON/OFF button (main power)
Press the button to turn the refrigerator ON or OFF.
Button In = Unit Is ON Button Out = Unit Is OFF
2. AUTO/GAS mode selector button
Press the button to turn the AUTO mode ON or OFF.
Button In = Auto Mode (Attempts Electric Mode First) Button Out = Auto OFF (Attempts LP Gas Mode Only)
3. TEMP. SET button
The thermostat has 5 settings where 1 indicates the warmest and 5 the coldest temperature setting. Press the button once
to display the current setting. Continue to press repeatedly until the desired setting, e.g. 3, is shown in the LED display. This
value is shown for about 5 seconds and then the fresh food compartment temperature is displayed once again.
1 2 3
LED PANEL INDICATIONS STATUS INFORMATION
Display is on Refrigerator on
Display is off Refrigerator off
The AUTO indication
dot is lit.
AUTO mode and
AC operation
The AUTO and LP
indication dots are lit.
AUTO mode and
LP gas operation
The AUTO indication
dot is lit. LP indication dot
ashes slowly.
Temporary gas lockout function. Only in AUTO mode.
It delays LP gas operation by 15 minutes when ignition
switch is turned OFF. This is for stopping at a refueling
station.
The LP indication
dot is lit.
Manual LP gas operation mode.
Digits
e.g. Fresh food temperature.
Thermostat range setting indication (1 - 5). Temporary dur-
ing setting. The thermostat settings are stored automati-
cally after 5 seconds of inactivity.
Message indications:
“60” is displayed.
Fresh food compartment temperature is above measure-
ment range.
“LP” is ashing (The message
alternates between “LP” and
the fresh food compartment
temperature.)
LP gas operation lock out.
(Check LP gas.)