User manual

EN
Technical description PerfectCharge MCP1204/1207
14
6.2 Status indications
Meaning of the blue LEDs (mode 1 and 2)
Key to the figure:
Designation Description
Red LED Flashing: The polarity is incorrect, or the battery voltage is less than
9V.
Constantly lit: The connection to the battery was disconnected
during the charging process.
Green LED Constantly lit: Mode 1 or mode 3 is active.
Flashing: Mode 2 is active.
Blue LEDs In mode 1 and mode 2, the LEDs indicate the phase in which the
battery charger is currently operating (see the following table).
The LEDs flash in succession when the battery charger is operating
in wait mode (the mains voltage is connected but the battery is not
connected).
The LEDs flash simultaneously when the battery charger is ready for
use (mains voltage is connected, battery is connected, button has
not been pressed).
LED status Meaning
Off
Flashing
Constant glow
4
3
2
1
12 345678
14,4 V
14,7 V
Mode 2
Mode 1
13,8 V
14,4 V
12,8 V
14 V
U
t