User manual

EN
Setting the system MWE820, 860, 890
10
9.2 Suppressing the display of fixed objects (such as
trailer hitches) (MWE820, 860 only)
A
➤ Switch on the ignition.
➤ Engage the reverse gear.
➤ Press the button for three seconds until the loudspeaker beeps briefly.
✓ The loudspeaker emits short beeps repeatedly.
✓ The system initialises the fixed object.
➤ To end the setting, disengage the reverse gear after a period of at least three
seconds.
9.3 Restoring the factory settings
MWE820, 860
➤ Switch on the ignition.
➤ Engage the reverse gear.
➤ Press the button for longer than four seconds.
✓ The loudspeaker beeps repeatedly.
➤ Disengage the reverse gear.
➤ Engage the reverse gear again.
✓ The system has been reset to the default settings.
NOTICE!
Before making the setting, make sure that there are no additional objects
in the stop zone, such as people or other vehicles.
MWE820-860-890-IO-16s.book Seite 10 Freitag, 26. August 2016 9:19 21