User manual

MS660 Installing MagicSafe

7 Installing MagicSafe

7.1 Tools required (fig. 1, page 3)

For installation and assembly you will need the following tools:

• Measuring ruler (4)

• Centre punch (5)

• Hammer (6)

• Drill head set (7)

• Drill (8)

• Screwdriver (9)

To establish and test the electrical connection, the following tools are required:

• Diode test lamp (1) or voltmeter (2)

• Hot air blower (10)

• Crimping tool (11)

• Soldering iron (optional) (12)

• Solder (optional) (13)

• Insulating tape (14)

• Heat shrinking sleeve

• Cable bushing sleeves (optional)

To secure the cable you may require additional screws and cable binders.

NOTE

If you do not have sufficient technical knowledge for installing and

connecting the components in vehicles, you should have a specialist

install the alarm system in your vehicle.

MS660-IO-DE-DA.book Seite 21 Mittwoch, 24. August 2016 2:28 14