User manual

EN
MS660 Connecting the power to MagicSafe
25
7.9 Installing the gas detector MSG150 (accessory)
➤ Install the gas detector as described in the relevant operating manual.
8 Connecting the power to MagicSafe
A
The complete circuit diagram for the alarm system can be found in fig. a, page 7.
NOTICE!
For vehicles with catalysers, you must shut down the fuel pump while
making the electrical connections.
No. Designation
1 9-pin connection cable plug (CL)
2 15-pin connection cable plug (alarm)
3 Convenience output
4 Alarm siren with backup function (MS-670SI)
5 Earth-controlled input for optional accessory modules
6 Earth-controlled output for optional accessory modules
7 Start lock (e.g. for the fuel pump, for the starter) or horn/siren (MS-620SI)
8 Bonnet contact switch
9 Start lock (e.g. for the fuel pump, for the starter) or horn/siren (MS-620SI)
10, 11 Indicator
12 Antenna
13 Vehicle battery (starter battery)
14 Connected positive terminal (ignition, terminal 15)
MS660-IO-DE-DA.book Seite 25 Mittwoch, 24. August 2016 2:28 14