User manual

EN
Using MagicSafe MS660
42
Programming functions
The functions are programmed by pressing the button “Lock” or “Unlock”
repeatedly in accordance with the number of the function, see list, page 36.
Example: You wish to activate the convenience locking function. This is function 4.
Press the “Unlock” button 4 times to activate.
The status LED goes out briefly each time the button is pressed to confirm the
selection. To confirm the programming step, the status LED goes out for 2 sec.
The preferred value is saved.
➤ Perform all the required programming steps.
➤ To end programming, switch the ignition on.
11 Using MagicSafe
11.1 Function table
The following table lists all of the functions and how you can activate them.
Function Condition
“Lock”
button
“Unlock”
button
“COM-
FORT”
button
Activating Ignition off ●
Deactivating Ignition off
Alarm system activated
●
Manual lock-
ing/unlocking of the
doors from the inside
Ignition on ●
Activating without
interior monitoring
Ignition off ● ● (30 sec.)
Panic mode Ignition off
Alarm system activated
● ● (1 sec.)
Convenience output Ignition off
Alarm system activated
●
Convenience output Ignition off
Alarm system
deactivated
●
MS660-IO-DE-DA.book Seite 42 Mittwoch, 24. August 2016 2:28 14